Having problems with your E-Machines eMachines Desktop PC ?

Continuous Beep-Beep-Beep.. When I turn on T3304 E Machine

\015 I have turned it on and off many times and have the same beep-beep-beep.. problem\015

Answers :

There is a faulty hardware in your PC. here the beep error code this might help to locate the faulty hardware in your pc, and which help you to isolate the problem.
\015\012
\015\0121 Short beep - System is operating normally.
\015\0121 Long beep - Memory refresh circuitry has failed which indicates a problem with the motherboard. Try
\015\012reseating the memory DIMM or SIMM modules. Make sure if you have added memory that it is rated at the correct speed for the system.
\015\0121 Long 2 Short beeps - The video adapter has failed, or the video memory is having a read/write
\015\012failure. Try reseating the video card. If the video card is a PCI video card, try moving it to another slot.
\015\0121 Long 3 Short beeps - The system does not detect a monitor. Verify that the monitor cable is properly attached to the video card or the onboard video and to the monitor (if the monitor has a detachable cable). If possible, try another monitor on the system to verify that the video adapter is operating properly.
\015\0122 or 3 beeps - There is a problem with the system’s memory. Reseat the memory DIMM or SIMM modules.
\015\0124 beeps - This indicates a non-functional timer. This indicates a problem with the motherboard.
\015\0125 beeps - This indicates a CPU (Central Processing Unit or processor) failure. Try reseating the processor.
\015\0126 beeps - This indicates a keyboard controller failure. Try reseating the keyboard connector.
\015\0127 beeps - Another indication of a processor problem. Reseat the processor.
\015\0128 beeps - This indicates a video memory read/write failure. Reseat the video card (if any) and memory DIMM or SIMM modules.
\015\0129 or 10 beeps - This indicates a ROM (Read-Only Memory) checksum error or shutdown register failure. This indicates a defective BIOS chip(s). Reseat the BIOS chips.
\015\01211 beeps - Indicates an error in the cache memory. If the system has a Pentium class processor, reseat the processor. If the system has a cache memory module, try reseating it. These beep codes will vary depending on the system
\015\012
\015\012hope this would help.
That is either bad memory or bios config.
Repair Help & Product Troubleshooting for E-Machines eMachines Desktop PC

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Continuous Beep-Beep-Beep.. When I turn on T3304 E Machine


There is a faulty hardware in your PC. here the beep error code this might help to locate the faulty hardware in your pc, and which help you to isolate the problem.\015\012 \015\0121 Short beep - System is operating no ... E-Machines eMachines Desktop PC

Emachines notebook m5310 corrupted bios recovery


Solution 1: Boot-block BIOSModern motherboards have a boot-block BIOS. This is small area of the BIOS that doesn't get overwritten when you flash a BIOS. The boot-block BIOS only has support for the floppy drive. If you have a ... PC Laptops

I have a 2003 or 2004 emachine that I am trying to start up to get my old info from, however I have two issues. 1. no signal from monitor and I have checked all cables. 2. when I turn on the CPU, there is a repeated beep noise. Any suggestions? What I was hoping to do was to just restart it to a previous date?


One of your ports is not working or your ram is not seated. thus beeping. On mine once I seated my ram the beeping stopped and I could continue.. If you say there is no signal to the monitor maybe the video card is bad. do you have a spare to throw i ... E-Machines eMachines Desktop PC

Emachine shut down


I have an emachine T3646 that is relatively new, when I hit the power button on the front it flashes and makes a solid beep but wont turn on, has anyone else had this problem? ... E-Machines eMachines Desktop PC

My gateway g7-500 fails to start properly. Whemn power on I get a long beep followed by 2 short ones and the monitor screen remains black.


Cause:This issue can be caused by any of the below situations.\015\012 \015\012\015\012New hardware conflicting with old hardware.\015\012Bad or failing hardware device.\015\012 ... PC Desktops

Don't know what to do next


It definitely sounds like a ram issue pull out all your ram and one by one put a ram stick in the first slot and turn on your pc if this fixes the problem and all your ram sticks are good then continue testing each dimm slott until the problem re-occ ... E-Machines eMachines Desktop PC

Flatscreen monitor for my pc, it stopped working. the on light comes on but no picture. it does the same thing on my husbands computer.


Solution:\015\012The following is monitor troubleshooting. If your monitor receives a proper display until it gets into Windows 3.x, ... Dell Dimension 4600 PC Desktop

Beeping emachine desktop won't turn on


Hi shyguy, Before I address your issue, I figured you ought to know: Buying an emachine is one of the worst moves a consumer can make. Why? because despite the fact that they are cheap, they frequently have problems, which can ... E-Machines eMachines Desktop PC

Power on problems


The beeps mean that there is some hardware problemif u count the number of beeps or is it continuous???????ne way try taking out the RAM and again placing it the RAM might be loose ... HP Media Center m7260n (EG642AA) PC Desktop

Turns on, no bios no screen, just beep.


Now the question is, when the computer first starts up and you hear the beep, that is where it will tell you what your problem is depending on the beep you get.One Long and one Short Beep = Motherboard issueOne Long and Two Short Be ... Gateway GT5028 PC Desktop

My Emachines Desktop W5243 works sometimes and others just beeps


You might be having a minor dust particle situation going on. Take the memory out of the system. Get a can of air and blow out the slots on the motherboard where the memory would normally go. Then take the can of air and blow the connectors on bot ... E-Machines eMachines Desktop PC

My computer is not turning on. I just wanted to know if it is a problem with the motherboard or simply the HD. When I press the turn on button, the computer turns on, the cooler works, but i can't see anything on the screen. If you could please tell me what to do, I would appreciate it.


Check if you can hear any beep sounds, if you hear a long continuous beep sound, remove the Memory on you Motherboard and clean it with a dry brush then place it back again, be sure you place it as how you remove it, make sure the lock knob on each s ... Toshiba PC Desktops

Toshiba laptop running w7, when i turn laptop on it goes straight to start in safe mode or normal, tried safe mode but get a continuous beep, then it switches off, then turns itself back on again, with the continuous beep, tried normal mode, same happens. the beep is continuous with no breaks.


Thats because your lap top needs to be reebooted in a format to reconfigur itself unfortunatly its not doing that please! do an early system restore to when it was working and save those settings for the next time this happens ok! and save all your c ... PC Laptops

Black screen when i turn on the computer


Post comment in my yahoomail so thAT i can kep in touch with [email protected]\015\012\015\012when you turn on the computer does the computer b ... Compaq Presario 5000 PC Desktop

Iam using lennovo y410 series.my lapton suddenly making some beep sound continuously on running and its not getting turned off. i removed battery and shutted down,i have been running laptop continuously for 1 whole day.even afterwards when iam starting the system its making the same sound.please slove the problem


1\015\012short beep\015\012\015\012 \015\012\015\012 \015\012Normal POST - system is ok\015\012\015\012 \015\012\015\012 \015\012\015\012\015\012 \015\0122\015\012short beeps\015\ ... Lenovo 3000 Y410 Notebook

Computer wont turn on with video card


Hi, the problem may lie in the temperatures of the card and power supply. If the system exceeds a certain temperature the system will shut down, this is easily achievable if you are over clocking your cards or CPU. You might find that installing extr ... Gateway DX4200-UB001A Desktop Computer

Turn it on it beeps cdc - E-Machines T6520 PC Desktop


You really aren't giving much info, so here are some beep - codes, also make sure nothing came loose on the motherboard or other components ( do this ONLY if you know how ) Safety first. BIOS Beep Sound core list \015\012\015\ ... E-Machines T6520 PC Desktop

Emachine beeps Hey, we just got a new emachine and we have the same problem! We got it mid/end of April but were in the process of moving so it stayed in the box till about a week ago. I hooked it up and when you press the on button it beeps 5 times then you hear the fan kick on like its thinking about starting up but then it just stops and beeps until you turn it off. The monitor says no signal and then goes blank. Any advise?


That would be a problem for e-machine. The beeps are codes. I will try to help, but it is hard to diagnose without looking at it.You can try several things. Open it up and make sure that everything is seated inside. Make sure the memo ... PC Desktops

Old comp beeping sound


Well..the updates might has confused the memory allocation settings, and the beeping is telling you that the memory is not happy. Try reseating memory, and swapping it's locations. Can't hurt. ... PC Desktops

I have an emachines E4214. When I turned it on, it gave me three short, beep,beep,beep. The fan is on, but there is no monitor display so I cant work out what to do. Can anyone please help?


With the power turned off, take out all your memory sticks and with one of the sticks try to reinsert it into a slot and then turn the machine one, if you get no beeps and you get video then you know that all you need to to is to reinsert the rest of ... E-Machines eMachines Desktop PC

Pc boots but no display. tried a new video card, still wont work. ram or motherboard?


If you hear a "beep" sound when your PC boots, it means your video device is initialized successfully. And if there is no beep, then no video device is initialized or installed. If it beeps and no display, make sure that the VGA cable is connected to ... PC Desktops

Hang at startup (BIOS)


Hi,\015\012Yes laptops can work without battery.\015\012If the laptop is hanging on Dell logo and entering into BIOS then normally it is HDD issue but you have already checked without HDD so might be it is RAM or Board issue.\015\01 ... Dell Inspiron 2500 Notebook

Turn on laptop and it gives the cursor and a blank screen plus a continuous beeping sound.can you tell me what's wrong? Mel


Sorry to say but you have Memory or video problems \015\012 \015\012Do you know what type of bios its running ? \015\012 \015\012is it one long beep ? or just short continuous beeps ?\015\012 \ ... PC Laptops

Turn on Pc, Continually beeps 6 times then shuts down


It seems that your memory card is out of place. open the pc, reseat the memory, and that should be ok. ... Dell Dimension 3100 PC Desktop

T6520 emachine. when i turn it on the fans start, the keyboard lights flash, the monitor led turns green (getting a signal) and about the time i'd expect to see some display image and/or hear the mobo spkr beep, the monitor led goes to amber (no signal). it had a graphics board - i removed and hooked monitor up to mobo video o/p - same results. i pulled all of the i/o power and data cables - same results. nothing smells burnt - no surge or lightning strikes - just won't reboot??? any suggesti


Based on your previous troubleshooting, with both built-in video and alternate video card, I'd guess you have a bad mobo. Anything else that was wrong with it (RAM, CPU, etc) and you'd get beep codes.Sounds like it's time for a replacem ... E-Machines PC Desktops
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5946 seconds