Having problems with your E-Machines eMachines Desktop PC ?

Need wiring diagram for emachines t2200 motherboard

\015 I need a wiring diagram showing the power hookups for an e machines t2200 the previous owner pulled them off without labeling them and we cant figure out where they goI have an emachine that is a 1900+ series and need to know how to wire the power supply. I don't see a place on the motherboard for the 12v 4 pin connector.\015

Answers :

If you are replacing the power supply and it has 4 pin 12v conector and your motherboard doesn't, just disregard the 4 pin plug. The 20 pin conector will supply sufficient power for the processor. Many of the older motherboards did not have a separate 12v supply for the processor.
I need wiring diagram for my emachine t2042! I can't figure out where the red/white, green/white and black/white wires go!

I already know where the power supply wires go, everybody does- they're all the same!
Repair Help & Product Troubleshooting for E-Machines eMachines Desktop PC

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Need wiring diagram for emachines t2200 motherboard


If you are replacing the power supply and it has 4 pin 12v conector and your motherboard doesn't, just disregard the 4 pin plug. The 20 pin conector will supply sufficient power for the processor. Many of the older motherboards did not have a separa ... E-Machines eMachines Desktop PC

Need wiring diagram for emachines t2200 motherboard


This is most likely the motherboard you are using. If it is, you can find a manual for it here ... E-Machines Athlon XP 2200+ (rb-t2200-c67)

Emachine t2742 I also have a wiring problem!


Gtater,It's ironic that you ask me this question today-- i am just now carrying in another eMachine computer to fix. Anyway, unfortunately I do not have one that is the same model as yours (T2742). However, I did some quick research and found t ... E-Machines eMachines Desktop PC

EMachine no power


Ok for a start the power switch is not green and white that is the power led, you need to look for a red and black wire normally marked on the connector and motherboard as pwrsw or pswitch.\015\012if you believe it to be the switch unplug the c ... E-Machines eMachines Desktop PC

Need wiring diagram for eMachine 20030812 motherboard!!!


You should be able to see the words/letters that go with the jumpers on the motherboard itself. look around the jumper settings area for power, pwr etc. and match them up with your jumpers which should have what the go to on them. ... E-Machines eMachines Refurbished EMA SYSTEM BOARD MODEL T2984 eMachines (102257) PC Desktop

Emachines t3830 I need the schematic for MB I umployed the wire for the push bottom without looking at the way they were plug. Now I do not know the correct aligning of the push bottom wires.


If you look at the motherboard there is usually a diagram labeled "FRONT PANEL HDR" that will tell you which pins are for: HDD LED, PWR LED, RESET, PWR ON. etc. The chart / diagram may be a few inches away from front panel header.the fol ... E-Machines eMachines T3830 PC Desktop

A power diagram for restoring power for a emachine


Hi there if you look real closley at the wires they are labled such as (pwr)led (reset) (hdd led ) (remote switch this the power for the computer) ect ect now look real closley and you will see the same markings on the edge of the board ... E-Machines eMachines Desktop PC

Need correct MOB location for power switch on emachine W3410.


What kind of motherboard did you change..?try to search in the internet.. just type the name of the board and including the diagram.. sample.."ASUS MOTHERBOARD POWER DIAGRAM"... ... PC Desktops

I need to know where the hdd led wire attaches and the blue 3 pin jumper.


Try this link from another forum:\015\012http://www.elhvb.com/mboards/oem/emachines/manuals/K7MNF-64_manual.zip ... PC Desktops

I have a T2958 and toof the face off. Can you


EMachines doesn't give out this kind of info, and I don't have one in the shop. eMachines also had the habit, of using a few different manufacturer's of motherboards. Intel, TriGem, MSI, Asus,and FIC to name five. Plus eMachines wou ... E-Machines (T2958) PC Desktop

Emachine t2984 - need to diagram to install power & hard drive


There is 2 main cables you have to worry about to feed power to the system. One looks like a big rectangle block with a mess of wires attached. Make sure he is hooked into the system. Then if its an newer unit you will find a plug that has square loo ... E-Machines eMachines Desktop PC

POWER SUPPLY NOT RUNNING T3065 - E-Machines T3065 PC Desktop


Dead in the water?Power supplies, depending on your demand, can cost you as little as 35 bucks. However, eMachines, power supply physical design is a bit different than most. Here is how you can bench test your supply to rule out any ot ... E-Machines T3065 PC Desktop

Connect wires to the motherboard


W3107 ... E-Machines eMachines Desktop PC

Need to re-attach power button cable, hard drive


The manual for your computer is available from emachines, p.168 shows the info you need (replacing the front I/O panel)\015\012 ... E-Machines eMachines Desktop PC

Can u possibly tell me where i might be able to download a schematic for an EMachine desktop computer model #T2742? It is out of warranty and was donated to our church and we need to know where to reconnect the main pwr switch wires and LED indicater (on/off) wires to the circuit boards ( 1 ea of red, white, blue).


Hi dallasblue08,\015\012\015\012Here's a diagram of what your looking for:\015\012\015\012The following eMachine models share the same motherboard (and thus the same front panel layout):T2742 T2796 T2798 T2824 T288 ... PC Desktops

Front panel leads Emachine model T2862


E-machine model T2862 pin-out for the 10-pin front panel header is screen-printed on my Emachine's motherboard, but is so small and far away from the actual pin location, that it is likely being overlooked. If looking into the computer case from the ... PC Desktops

Specs and pictures for a t2865 emachine computer


Ok, you may look the motherboard manual:\015\0121) set USB from page 14\015\0122) set the front panel four connectors look from page 12\015\012the manual reference :\015\012 ... E-Machines eMachines Desktop PC

I would like an internal view of eMachine T4150 to be sure everything is connected correctly


There's a bit of a toughie! eMachines doesn't like to give out this information, lyndapalimas, and I don't have one sitting in my shop.eMachines used four different motherboard manufacturers, to my knowledge. TriGem, Intel, FIC, and MSI. ... PC Desktops

Emachine t1840 wiring diagram power switch wire to mother board ?


Because there are so many different case and motherboard combinations\015\012sometimes it can be difficult following the instructions for connecting\015\012the front panel, USB header and audio header.\015\012\015\012Below is a few generi ... PC Desktops

Wires from switch came unplugged (white and black) where do they


Power On switch (Button)? Restart switch? Speakers?Wires came loose from the motherboard?Should like you to see if you can trace the wires back to the front panel, (Where the Power On button is located Granted, this may be a little tough ... E-Machines eMachines Desktop PC

Wiring manual for a thermalrock oceandome


Go here for complete motherboard support : http://support.asus.com/download/download_item.aspx?product=1&mode ... Thermaltake ThermalRock OceanDome Chassis Black, Model "RH-M010-1SW" (840556018780)

Cpu upgrade , please help


Tech-gu818, When looking to see what processors a computer will support, try to find out what motherboard chipset is on the motherboard, and the processor socket.The motherboard chipset is the;1) Northbridge chip2) ... E-Machines eMachines Desktop PC

Hp pavilion 764c wire diagrams


Take a picture of the inside of your computer and put it up on the website with the wire connectors that need to be connected. The connecting wires should be in four groups. 1. The power supply connectors. These connectors will supply power to to all ... HP PC Desktops

Need where pwr sw and pwr led and hdd led plug onto au31 motherboard


FIC AU31 mb (a.k.a K7m-NF18G mb)Pin Configuration = PinoutThe Front plastic panel of the computer is the Front Panel.The area of pins on the motherboard that the cables (Wires) go to, is the Front Panel header.Front Panel head ... E-Machines T3092 PC Desktop

I need a diagram for wiring a new power supply to a Gateway 509ge.


Although this problem is a year old, no solution was stated.Stating this in the hope it may help someone in the future;This is Gateway Support, and the main support page for the Gateway 509GE Desktop PC, ... Gateway 509GE PC Desktop
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.8425 seconds