Having problems with your E-Machines eMachines Desktop PC ?

When I power up my computer, it keeps making a beeping sound, and nothing on my screen.


Answers :

Open cpu cabinet.
Reattach the ram memory.
Open processor and its fan then put both into it's position.
Make sure motherboard is not ground with cabinet.
Reinsert VGA card and PCI card if any.
Also make sure your RAM memory working fine try another ram.
Let me know if you need further assistance.
Thanks for using FixYa.

Repair Help & Product Troubleshooting for E-Machines eMachines Desktop PC

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My gateway g7-500 fails to start properly. Whemn power on I get a long beep followed by 2 short ones and the monitor screen remains black.


Cause:This issue can be caused by any of the below situations.\015\012 \015\012\015\012New hardware conflicting with old hardware.\015\012Bad or failing hardware device.\015\012 ... PC Desktops

Monitor not coming on - Packard Bell Easynote R4650


It's a dreadful way to start a day - you press the power button on your computer and nothing happens. Do not fear because all may not be lost! Follow these simple steps to determine why your computer won't turn on. Note: It is very import ... HP Pavilion a305w (DM181AR) PC Desktop

Does not power up


It's a dreadful way to start a day - you press the power button on your computer and nothing happens. Do not fear because all may not be lost! Follow these simple steps to determine why your computer won't turn on. Note: It is very import ... IBM ThinkPad T22 2647 Notebook

My pc beeped twice and nothing came


Lack of video signal is usually 1 of 3 things, Power supply (PSU), Video card or Motherboard (mobo).Situation #1: If you get a blank screen and no sounds or movement it either indicates that the power supply unit (PSU) has failed or somet ... Dell Dimension 2400 PC Desktop

Post codes I have an IBM Intellistaton Z Pro 6221 what when turned on now only has 3 long beeps that keeps repeating. I can't find what this post code is. Any suggestions?


Dely with this earlier today (else why would I be here?) I tracked the beep codes through the labyinthine IBM support and basically got no answer. This is what IBM said in the "Troubleshooting POST/Startup" manual Beep code  3-3- ... IBM IntelliStation Z Pro 6221 PC Desktop

Computer won't load anything


You stated you removed the CPU. Did you clean the old theraml grease off & apply new before you reconnected your heat sink & fan? Did you reconnect the ATX 12V JPW1? power. This 12V power connector is used to provide power to the CPU? Lastly ... PC Desktops

I recently moved my computer into my new condo and have not been able to use it since. The problem seems to be with the monitor. I turn on the computer and the fan comes on but the monitor displays "no signal" and then goes dark but the light one the front still flashes indicating it is getting power. The last time I moved my computer from one room to another, the monitor suddenly couldn't/wouldn't display colors accruately - no red. Attempt to adjust the color by using the monitor's controls we


Lack of video signal is usually 1 of 3 things, Power supply (PSU), Video card or Motherboard (mobo).Situation #1: If you get a blank screen and no sounds or movement it either indicates that the power supply unit (PSU) has failed or somet ... E-Machines eMachines Desktop PC

Intel D845GLAD motherboard


This is indeed listed as a Memory error by Intel\015\012\015\0123 beeps = Base 64K memory failure\015\012\015\012the name of that probably doesn't say much to the average PC user, but for those of us who remember the good ole ... PC Desktops

My thinkpad powers on and nothing


Hello and thank you for using Fixya's services. I have a couple of questions and some troubleshooting tips for you:Questions: Is the splash screen coming on at all? Any picture or text right when you boot up? What Window ... IBM ThinkPad T40 2373 Notebook

No video signal to Monitor.


Lack of video signal is usually 1 of 3 things, Power supply (PSU), Video card or Motherboard (mobo).Situation #1: If you get a blank screen and no sounds or movement it either indicates that the power supply unit (PSU) has failed or something o ... E-Machines eMachines Desktop PC

Comp makes a buzz noise and wont show any start up


Suggest you,A) Look at the back of the computer at the Power Supply fan, and tell me if it's spinning. (Where the power cord plugs in, is the Power Supply)B) Open the computer case, look at the Processor fan, and tell me if it ... PC Desktops

Start up problem


Generally, that loud beep you hear is your BIOS (the part of the \012computer that turns on everything else) alerting you that there is a \012serious error with it's ability to function. Just for example, the beep \012could be due to your RAM not bei ... HP Pavilion dv2000t 14.1" Notebook Laptop PC (Intel Core 2 Duo T5500 1.66 GHz, 1GB RAM, 100GB HDD, D... PC Notebook

Re: your suggestion for my Dell Lattitude D600 Hard Drive Problem


Ok, now we have some good discourse! While I'd always prefer to use a friend's laptop to test my fringe hypotheses, having your own is a fine option too. And it sounds like you have an enclosure too, so you are pretty much all set. It's r ... PC Laptops

SPoradic faults when booting


This problem isn't easy to diagnose, but there are some things you can try to narrow down the problem. Do this at your own risk, but go into the bios settings and check your processor temperature. Take note that if there's a a feature to enable pro ... PC Desktops

No sound on my computer


I was having these problems on my daughters laptop only last night. I tried to re-install the graphics installer and no matter what option I chose, be it restore or re-install (the driver), nothing worked. In the end I opted to reset the computer b ... HP Pavilion dv6000z Notebook

Computer suddeny refused to turn on/boot whatsoever


It sounds like the hardrive you installed overloaded the system and cause a low power operation on the computer the motherboard may be bad because of this as well as anyparts that were connected to it i have had this happen to me before and well i kn ... Dell Dimension 8400 PC Desktop

How I open my widows by protected password - PC Desktops


You will have to remove the hard drive and back up all the files you wish to save. You can do this with a 7 dollar USB hard drive adapter cable from E-Bay. Save your files on another computer. You then have to be able to boot the compute ... PC Desktops

Emachine destop not recognising acer lcd monitor


It sounds more like the computer isn't starting up. The "no signal" message is coming from the monitor itself to tell you it's on but there's nothing coming in to display. Normally no special drivers are required for the monitor, and you'd see at lea ... Microtek C593 15" Flat Panel LCD Monitor

Computer dies on me (can't say it better due to no technical knowledge; pls read :-)


The 'click' sound you hear when your computer goes off is the hard drive head parking itself.  It does this whenever the machine shuts down to prevent damage.As for the problem itself, I believe your computer is overheating.  Th ... Acer TravelMate 290LCi Notebook

Lost Stuff I've lost my sound....and I've lost my CD/DVD drive....I want to restore back to factory settings....would that bring them all back? If so I do I do that?


Hello,\015\012\015\012 Yes. Once we restore the computer is set back to factory settings all the functionalities along with sound and cd/dvd drive will work fine as the software,drivers along with saved data and corrupted files will be ... HP Pavilion dv6000z Notebook

I have a toshiba a135 s7403. It shut down while just surfing the net. Since, it won't start up. Can hear the fan running and dvd drive turn on, but nothing happens on the screen. Had the motherboard replaced a couple months ago before the warranty expired. Tired removing battery and unplugging it for days. No luck. Any ideas?


If the memory is not\015\012evenly seated after inserting it according to the instructions, there\015\012are 2 ways to correct this. The first is to use a tool to set along the\015\012edge of the memory module on the outside edge of where it is not f ... PC Laptops

NO POWER GT4010 GATEWAY COMPUTER. THE POWER BUTTON WOULD NOT START THE COMP. REPLACED THE POWER SUPPLY AND STILL NO POWER. BUT MY INTERNET IS CONNETED THRU THIS COMP. AND IT STILL WORKS.


If you have changed the power unit and the computer is still not powering up, then it is quite likely there is a motherboard fault - probably in the power management circuitry, which expects the power_good signal from the power unit at a precise mome ... Gateway GT4010 (RBGT4010) PC Desktop

Dell D800 won't boot


You have an issue of no display and as you see that u are betting the knocking sounds, could u plzz let me know are you getting these sounds when you power on the computer with the Fn and the power button, if you are able to listen to the sound but t ... Dell Latitude D800 Notebook

Screen won't appear upon start up and I get 3 beeps but no screen


3 beeps POST code (power on self test) means RAM problem.\015\012Reseat the RAM module/s and boot up your computer.\015\012If you have two RAM modules, remove them both and insert one at a time to test them, to determine which module is f ... Everex StepNote NC1500 Notebook

Tried everthing just cant get this thing to boot up


Sounds like you may need your screen replaced.Upon turning on your laptop,Keep pressing F8, until you hear a beep. This will give you the option to boot to safe mode. When you hear a beep, and NOTHING comes on your screen within 20 ... HP Compaq Presario 2200 Notebook
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 1.2163 seconds