Having problems with your E-Machines eMachines Desktop PC ?

COMP. JUST CUTS OFF AND EVERYTHING GOES DEAD. BLUE LIGHT BLINKS BUT WONT WORK TILL YOU TOTALLY DISCONNECT AND PLUG IN AFTER 20 MIN. T6528


Answers :

Power Supply is the highly probable culprit on this. Call your local manufacturer to replace the power supply. Also, try connecting it directly to the power outlet (if it's connected to a power strip). Also, check the fans on the computer. All should be spinning and air should be coming out of it. Feel the air coming out, is it warm or hot. If it's hot then I suggest you really call your computer manufacturer or who you got this from since this needs more troubleshooting and probable replacement of parts inside.
Check the fan if any on the processor. See if it is working.
This sounds like a heat problem.

One quick way to determine heat shut down.
Take the side cover off, (The one where you can access the processor and memory). Take a fan and aim it toward the computer.
If the machine keeps running you only need to clean and maybe add another fan to the box. If it is the fan on top of the processor that has stopped working. It will most likely die again. Just be sure the fan on the processor is clean and working.
If not replace fan and clean heat sink. It is really not difficult.
Just do not remove the processor! You may bend those delicate pins.

The power supply also has a fan that circulates air.
Use one of those canned air things and blow the vents out.
DO NOT let the fan spin wildly while doing this. (can damage the bearings). Just hold a pencil or anything to stop the fan from spinning while you clean. Make certain you do all this with the machine unplugged!

Canned air works well on the Process fan and heat sing too!

Good luck!
Hope this helps!
Repair Help & Product Troubleshooting for E-Machines eMachines Desktop PC

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

COMP. JUST CUTS OFF AND EVERYTHING GOES DEAD. BLUE LIGHT BLINKS BUT WONT WORK TILL YOU TOTALLY DISCONNECT AND PLUG IN AFTER 20 MIN. T6528


Power Supply is the highly probable culprit on this. Call your local manufacturer to replace the power supply. Also, try connecting it directly to the power outlet (if it's connected to a power strip). Also, check the fans on the computer. All should ... E-Machines eMachines Desktop PC

IBM T21 Thinkpad


Here are the solutions ive gathered for this problem:================IBM has finally given me a fix for the T21 I am working on for a customer. I asked them "What if it doesn't work, then what. Their re ... IBM ThinkPad T21 Notebook

Toshiba satellite a100 wont take on power or boot


For this latop alwats faulty wirh power ic can use trick plug in and out some times, then laptop ok works, but not charge battery ... PC Laptops

Computer won't start


Try this; Disconnect from the AC outlet rmove the dc plug from the jack. Remove the Battery and wait for 5 mins and plug in the AC-DC adaptor without the battery. If the Laptop runs, then wait for the Windows to totally boot up and while running try ... PC Laptops

Toshiba satelite A100 rejects AC... often.


Just to humor me, are you using any peripherals with your laptop when this happens, such as a wireless mouse, USB connections such as digital cameras? Try to take these away when recharging.There seems to be 2 issues here. 1) Rechar ... Toshiba Satellite A100-S8111TD Notebook

XP wont connect to internet through Sky Sagem Router


NO Internet\015\012· reinstall drivers first including the network adapters.\015\012· ... PC Desktops

Cant get it to turn on/ panasonic CF-51 toughbook laptop.


Here are some troubleshooting hints, see if these will work for you. It is hard to knnow what to do in these situations because there is no way of telling what key combinations etc. were hit.\015\012\015\012 ... Panasonic Toughbook CF-51 Notebook

Last night the plug for my computer was accidentaly pulled out of the wall. The computer was on at the time. I plugged it back in and pushed the power button and nothing happend. I unplugged it, waited about 10 mins and plugged it back in and still nothing. I tried plugging it into a different outlet... still nothing. I waited an hour....nothing. This morning I noticed the green light you can usually see inside the pc was on. I pushed the on button to see if it would work now and still no


Hello.Pulling the power plug from the wall wouldn't create this situation. I have personally disconnected a desktop computer from power hundreds of times without problem.If the computer has cooled off and still doesn't power ... PC Desktops

Wont boot up


We need to open the case and inspect the cables and cards and memory to make sure nothing has gotten dislodged. heres how to get into the case.\015\012Before Opening the PC\015\0121 Remove any diskette or optical disc (CD or DVD) ... Compaq Presario SR1810NX Sempron 3200+ 1.8 GHz Desktop PC ( Monitor Sold Separatley) (ER912AA)

PC wont boot after being turned off


Try to enter in to BIOS by pressing F2 function key and reset the BIOS,,, and secondly i suggest you to perform power drain process..\015\012 Take the power plug from the notebook and remove the battery..... after that hold the power button on th ... PC Laptops

Atp3 wont power up why?


There is an internal fuse in the Altec Lansing Speakers ..BUT BE CERTAIN TO DISCONNECT THE POWER LEAD BEFORE MAKING THE FOLLOWING REPAIR.AS IT CAN BE DEADLY!!! \015\012If you remove the larger screws from the back of the unit then remove the to ... Altec Lansing ATP 3W Computer Speakers

LG 50PC55 Plasma - Wont work?!?


I had an issue with this TV too, it suddenly started blinking on and off whilst I was watching TV. I turned it off and on and problem persisted. I then pulled the power cable out from TV whilst it was still switched on and waited a few mins and put i ... Computer Monitors

Laptop wont start up


At this point your Operating System is Corrupt and has to be reinstalled\015\012\015\012The only fix is to install your factory restore disk to Restore the System unless the notebook comes with a full system restore; you can call the com ... PC Laptops

The memory I install to Armada wont boot


You can try updating the bios to use the new memory or you may have to buy a different brand of memory to work in the computer.All memory is not made the same.Some work in one machine and not in another.You won't know till you try it. ... Compaq Armada E500 Notebook

No power off charge


It is evident your Battery is not working - If it is not too far gone which it quite possibly is follow my steps to fix the battery and allow it to hold charge:1. Remove the battery from your Laptop - In a lot of cases there will be a sli ... Samsung V20 XVC 2400 Notebook

Dell Inspiron 6400 wont recognize new battery


Well often batteries from 3rd party manufacturer do not work in some laptops, see even the batteries have a "Chip" in them identifying them. Also sometimes these batteries are just no-good. or arrive flat, too flat to be charged up via the supplied c ... Dell Inspiron 6400 Notebook

Computer wont start up. Blinking green light in the back of tower


I've had that happen twice to my Vaio desktop and there was a very easy fix. I'm not a techie, but I found a recommended solution online when this first happened six months ago. I couldn't find the solution again, but I fortunately remembered the s ... Sony VAIO VGC-RB42G PC Desktop

Battery or ac adapter problems?


The power jack on the system board may be loose or disconnect. The only way to check it is to plug in the AC adapter and wiggle the connector , if it feels loose then that is the problem. The other way to find out, is taking out the motherboar ... HP Compaq Evo n610c Notebook

Dell Latitude D800- Keyboard and mouse stop working when undocked.


First update any drivers for your dell.\015\012\015\012www.support.dell.com \015\012\015\012Is the dock a dell dock, or a universal Dock?\015\012 ... Dell Latitude D800 Notebook

Laptop hi, i have a satellite M3OX and it has totally frozen, the touchpad wont move at all. ive been on a forum and lots of people have told me to do lots of things but they all involve pressing keys but nothing is working at all. When i press start the options come up but once the little egg timer stops it just freezes. I have tried a plug in mouse but that wont work either, please can anyone help, thanks x


If it's frozen so that nothing gives you a menu, etc., I suspect the only option is to remove the battery and pull the power plug. That will ALWAYS give you a cold reboot. It's not the way you'd like to shut down, but it sounds like you have no cho ... PC Laptops

Hp pavillion power problem


Perform the following steps, in order, until power is restored or it is determined that there is a hardware failure:CAUTION: This product contains components that are easily damaged by ElectroStatic Discharge (ESD). To reduce the chance ... HP PC Desktops

I changed the fsb from 166mhz to 200mhz on my computer


You will need to clear the coms 0n the motherboard to do this shut it down and unplug it then look for a 3post/pin on the motherboard that says clear coms and has a jumper on it>move the jumper over one post/pin unplug it from the 2pins on the rig ... E-Machines W3052 PC Desktop

A mind of its own


Check the cmos battery and the power suply. lok for swollen compassitors ... PC Desktops

Display Failure for HP dv9000 Laptop 17"


Thanks Zohail for your comment.\015\012======================================================\015\012My friend Juan Carlos asked me to check his laptop.\015\012Captioned laptop was checked/inspected by two technicians and no one get ... HP Pavilion dv9000z Notebook

Gateway 900g Hi I have a Gateway 900g monitor that does not work. All was fine working until one day it just stopped working. It wont switch on or anything. I think it may be the power supply board but I cant seem to find one anywhere and I read that you fix them. If so then how much would that cost and how do I go about it. Regards Adrian


I'm writing this using a recently repaired Gateway 900g. You may be correct about the power supply, as that was the problem on this unit. There was absolutely no response with this unit. No blue LED, no dim display. Nothing.\015\012\0 ... Microsoft ChiMei CMV938D 19" Widescreen LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.9177 seconds