Having problems with your E-Machines eMachines Desktop PC ?

My Emachine T-6216 doesn't boot up, I try a new power supply, a new hard drive and nothing happens. So I assume the motherboard is no good.


Answers :

Mine had the same problem it has a jumper inside it for cmos.It is a tan colored piece in beside the front fan plug.Take it off the two uper prongs and put it on the two lower ones then turn your computer on it will bring up cmos.Change to default settings save before exit by pressing f10 then shut it off and move jumper back to normal position turn back on problem solved
Did you try to change the CPU? It is _NOT_ likely to be the problem.
\015\012But, if you did, and you still have the problem, then it _IS_ the motherboard.
\015\012
\015\012If you didn't try to change the CPU, it probably _STILL_ is the motherboard.
\015\012
\015\012Contact 'www.eMachines.com' and see if you can purchase a replacement motherboard.
\015\012
Repair Help & Product Troubleshooting for E-Machines eMachines Desktop PC

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

We've had a Gateway 816GM desktop for about 3-years and except for the usual PC problems it's been fairly reliable. However, in the last few days it started locking up, no video, then it starting hanging and finally it will now not boot up at all. The HD light on the front doesn't even light up. A friend did a quick look at it and suggested the motherboard was gone. I'm assuming if the hard drive was bad the computer would at least boot up, but I don't even get the start up screen or any


Bill,If the hard drive is still good, your files are safe. Replacing the motherboard may mean you will need to reinstall the operating system so you will have to get the files off before you do that.Now, even though it could be the ... Gateway 816GM PC Desktop

My gateway g7-500 fails to start properly. Whemn power on I get a long beep followed by 2 short ones and the monitor screen remains black.


Cause:This issue can be caused by any of the below situations.\015\012 \015\012\015\012New hardware conflicting with old hardware.\015\012Bad or failing hardware device.\015\012 ... PC Desktops

Wont boot up


Dear bebjirmav\015\012\015\012usually a machine that refuses/ gets gobby on boot up has either a config error or hardware fault. Now the first thing i tend to do is whip out that hard drive (carefully though as the thing is fairly fragile ... HP Pavilion dv6000z Notebook

Dell Precision 380 won't boot


I had a similar situation with a work computer; the power supply always tested good. A wiser and more experienced computer guru ordered a new power supply. He gave it to me told me to install it, I did and was laughing the whole time. Well it in fact ... Dell Precision 380 P4 Dual Core 3 GHz (99382) PC Desktop

Computer suddeny refused to turn on/boot whatsoever


It sounds like the hardrive you installed overloaded the system and cause a low power operation on the computer the motherboard may be bad because of this as well as anyparts that were connected to it i have had this happen to me before and well i kn ... Dell Dimension 8400 PC Desktop

EMachine T3958 Won't start - Please help


The green LED indicates that the standby voltage is present which is what provides the power so the front button can tell the unit to turn on fully.\015\012At that point, there are 3 possibilities; the power supply has a fault and won't turn on ... E-Machines eMachines Desktop PC

EMachines T2824. Does nothing but light on mainboard coming on...


This sounds like an old system and you have replaced the power supply, did you change the little round battery on the motherboard? It may have went bad with the power supply. Unfortantly, if a power spike took out the power supply, it might have take ... PC Desktops

Dell inspiron does not boot up


Do you see anything on screen? Dell logo? I will assume you see nothing. Not even a Dell logo.First test your power supply with a meter to be sure it is putting out 18-19 volts. If good, remove the laptop battery and try again. The next t ... Dell Inspiron 6400 Notebook

Dead pc Dell xps 410 won't boot all of a sudden. Power supply, statuslights, fans, HDDs, etc.. seem to be running, but nothing on screen, not even bios info. No new hardware or software and nothing weird leading up to this. Status lights combo code indicate bad memory, but I tried switching out the ram and nothing happened. Mobo went bad maybe?


Try to remove all external device connected to your computer. just leave the keyboad, mouse and monitor connected.\015\012restart computer. \015\012if still a blank screen\015\012remove everything connected to your computer (mouse k ... Dell XPS 200 PC Desktop

HP Pavilion ze4125 PC Notebook will not boot up


I myself have a ze4125us.First thing you want to do is look at the green LED on the power pack to see if it is lit.  IF it is not, then your power supply is most likely fragged and you'll need a new one.  It's easy to find them ... HP Pavilion ze4125 Notebook

Dell e510 won't make it to post


Unplug computer, disconnect all usb/monitor/internet, open it, hold power button until green led on the inside on the motherboard turns off, pop out the BIOS battery (looks like a big watch battery and use a small flathead screwdriver to depress the ... Dell Dimension E510 Dual Core 2.8 Ghz (847403171179) PC Desktop

My hp pavilion a336n will not turn on. When I plug the power cord in the light on the back of the hard drive will turn on, but when I press the power button nothing happens... any suggestions?


To resolve this issue you may need to open the chassis (the computer cabinet). You can call HP specialized support for help but they charge you for the support. You can call them at 866-211-5207. \015\012\015\012OR - Follow the given step ... HP PC Desktops

Emachines e4026 non-responsive


I don't think it's an overheating CPU. It would stay on for a bit longer if it was that.\015\012\015\012My best guess is a power supply issue. Either your power supply is bad, or more likely something is pulling too much power from it. Emachines a ... E-Machines eMachines Desktop PC

T2085 will not turn on


Replacing a power supply is a rather simple affair. Just make sure that the new one purchased has the correct power connectors for your computer. The motherboard will probably have either a 20 or 24-pin connector. Many new power supplies will work ... E-Machines eMachines Desktop PC

Dell Dimension 5100, Doesn't Boot Up, Display Lights Up "!, 2 3"


2 green lights usually indicate a memory problem, however, when you get 3 lights, RAM is good, but the BIOS is unable to hand off to the operating system.To test this, disconnect your hard drive (both ribbon and power) and connect the mon ... Dell Dimension 5100 (D51L1) PC Desktop

Gateway gt5220 beeping noises, fan on.


What may be happening is that files are corrupt as a result of a HD failure. This is not that uncommon. It has happened to my computers causing strange beeps and often repeated clicking noise coming from the hard drive. HD failure can ... Gateway GT5220 PC Desktop

Thinkpad t20 trouble installing operating system


Three reasons why its not making it. One is a faulty hard drive, and even though you bought a new one it can still be faulty. Two is your Windows XP Disc is damaged but the most likely one is that your motherboards slot for the hard drive and/or more ... IBM ThinkPad T20 2647 Notebook

All dvds will not play in dvd rom on xps400


You can start from checking its general status (it is not clear from your description of the problem). The first you can check if the drive is visible to the systemWith WinXP it is in menu Start\\Control Panel\\System\\Hardware\\"DVD/CD-R ... Dell XPS 400 PC Desktop

HARD DRIVE PROBLEM.


If the first drive will get recognized on another computer but not yours it would lead me to believe that the controller on your motherboard went out. But the part about the non os drive not getting recognized at all leads me to believe that drve wen ... PC Desktops

My HP a420n won't start after replacing cd-rw drive


Please try to remove all the connections from your computer and also connections inside the motherboard, the power cord for your hard drives and also the power cord from the power supply to your motherboard.After that, remove the memory and clean the ... PC Desktops

My on button just blinks on and off but when I push it to turn it on..nothing happens..its like it isnt getting any connection


Laptop is dead. How to troubleshoot the problem.\015\012In this post I’ll explain h ... Acer Aspire 5520-5908 Notebook

CPU doesn't turn on!!


\015\012\015\012\015\012\015\012\015\012Power supply light on or flashes\015\012Perform the following steps, in order, until power is restored or it is determined that there is a hardware failure ... PC Desktops

Pavillion does not start up push power on and nothing happens blinking light on back of power supply


Power supply light on or flashesPerform the following steps, in order, until power is restored or it is determined that there is a hardware failure:\015\012\015\012\015\012\015\012\015\012\015\012\015\012CAUTION:\015\012\015\012This product conta ... HP Pavilion a1610n PC Desktop

Frezes at verifying DMI settings. Already changed MB and Power supply. Lan connection only flashes green once in a while should be constant. Tried on a working terminal and does the same.


The Desktop Management Interface (DMI) is a newmethod of managing computers in an enterprise. Themain component of DMI is the Management InformationFormat Database, or MIFD (the DMI Pool Data). Thisdatabase contains all ... PC Desktops

My computer w2686 do not start


I'm assuming that when you say "unplugged" that are you are meaning to say that you're unplugging the IDE ribbon but still leaving the power plugged in to the device.Try resetting your CMOS settings by using the jumper on the motherboard. ... E-Machines eMachines W2686 PC Desktop
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 1.4908 seconds