Having problems with your E-Machines eMachines Desktop PC ?

Emachine T3958 wont turn on

\015 Power light was flashing on front of panel now nothing green led is still lit on motherboard but no other functions\015

Answers :

Check if the fan on the power supply is blowing out the back of the case where you plug the mains lead in.
If not then you need to replace or repair the power supply unit.



Make shure that the 4 wire plug to ther mother board from power supply is plugged in..other wise try a new power supply
Repair Help & Product Troubleshooting for E-Machines eMachines Desktop PC

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My emachines wont turn on


Also in addition to the above, try reseating the ram chips..take them out individually and plug them back into their respective slots..might be the miracle cure..If the motherboard fan turns on, it might just be bad memory..replace RAM chips ... E-Machines eMachines Desktop PC

Emachine T3958 wont turn on


Check if the fan on the power supply is blowing out the back of the case where you plug the mains lead in.If not then you need to replace or repair the power supply unit. ... E-Machines eMachines Desktop PC

Computer wont turn on


Hi\015\012Bad news. your motherboard has been fried. You could try refashing the BIOS but I've got $10 dollars to your one that it wont work. Best bet - keep the tower, keep all of the running gear but a new motherboard and prosessor are in ord ... E-Machines eMachines Desktop PC

Emachines pc help plz


Besides MSN, what else can you not do? ... E-Machines eMachines Desktop PC

Gatweway lap top button light up, but wont turn on


I'm afraid this sounds suspiciously like a motherboard problem. It would help to know what model etc, as some Gateway & EMachine model laptops have had extended warranties due to motherboard issues, or just go to Gateway.com and research it yours ... PC Laptops

When i turn on my emachines 420 at the mains, the led power light comes on, but it wont do anything else including turning on or off


Hello there,this sounds like a problem with your power supply unit inside the computer,emachines are always blowing there power supply because the one that comes with the computer just is not powerful enough.If you are confident enough around electri ... E-Machines eMachines Desktop PC

I got an emachines w3650 it wont power on i don't know really anything about computers but i opened the side of it to look in side and saw a wire with P6 written on it hanging and not plugged into anything. should that be plugged in to something? could that be y the comp wont turn on? any ideas or suggestions i would appreciate


In the most basic system setup the power supply will have two wires power the motherboard, one for the CD/DVD drive, and one for the hard drive. there will be extra ones for future upgrades...i.e.2nd hard drive/DVD burner and so on.... On my PC there ... PC Desktops

Emachines t3958, bad ram, green stand-by only no boot


Are you saying you bought 2 more machines to fix the problem? I don't understand. Do you have the manual for the machine. How long did your system run before a Ram stick went bad? What brand and size are your Ram sticks. Are they identicle? As far as ... E-Machines eMachines Desktop PC

Wont power up


Ok, the best actions here will be to purchase the correct power supply unit. you can order your unit online or , you can purchase it, via best by or office depot. this current supply unit may not have the correct ratings for your unit. if so, it will ... E-Machines eMachines Desktop PC

The lights are on, but nobodys home


Im having the same problem with mines, so im on my laptop now. I've done some research and it turns out that eMachines has a habbit of blowing out their motherboards, and that its being caused by the design of the case for which the board sits on. So ... E-Machines eMachines Desktop PC

Emachine T5062 pc wont turn on, I get 5 beeps When the computer performs the ''Power on system test''. I could not remember what BIOS the computer had but I think It was AMI. The five beeps for AMI mean that its Processor failure: The CPU has failed this is the site i used to check the beeps http://kb.iu.edu/data/afzy.html I did vaccum the inside is the pc because it was really dusty and i removed the hatsiins for the CPU, I tried to reinser it but Im sure I put it back on right any suggestion


Make sure it is not getting really hot, also try cleaning all again and start putting them together step by step. make sure the dust didn't got in another part like RAM memories slots, and if you have a big problem with the processor the PC wouldn't ... E-Machines eMachines Desktop PC

NTLDR is compressed


All you need to do is boot to the recovery console, and type the following commands, in order:cd \\attrib -c ntldrexit ... E-Machines eMachines Desktop PC

My Emachine wont stay turned on


This can b caused by a few different problems\015\0121) The machine can be over heating, maybe due to a bad or slow running CPU Fan.\015\0122) Bad power supply\015\0123) Can b software problem, maybe a Virus\015\012Try turning ... E-Machines eMachines Desktop PC

EMachine T3958 Won't start - Please help


The green LED indicates that the standby voltage is present which is what provides the power so the front button can tell the unit to turn on fully.\015\012At that point, there are 3 possibilities; the power supply has a fault and won't turn on ... E-Machines eMachines Desktop PC

Contrast/menu/screen resolution box wont stop flashing on screen.


Try to clean around it's exit button sounds stuck\015\012or unplug monitor for about 20 minutes\015\012if the problem persists i would reinstall driver ... E-Machines eMachines Desktop PC

Tried to add RAM but now computer won't turn on


Hi there.Take the ram out, turn the PC on and tell me if it beeps ... E-Machines eMachines Desktop PC

Emachines T3958 will not turn on


Check the fuse on the inside of it and see if it is not blown, if not blown change it any way it may not look like it is blown but it is hard to tell, and see if that work. ... E-Machines eMachines Refurbished EMA SYSTEM BOARD MODEL T2984 eMachines (102257) PC Desktop

I have a Emachines w4682 and the monitor was showing no signal when I turned computer on. I hooked up a different monitor and that one worked so I re connected the original monitor and it worked I then got the computer working except that the USB ports quite working. Stupid me I shut the computer down and when I went to start it up it turned on and back off after less than a minute and now the computer wont turn on at all. Is it the motherboard, the power supply? Any help would be appreciated


Possible reasons are bad power switch, bad power supply, bad motherboard, bad memory , device card is not seated properly. Suggest replace power cord to see if still no power, also you may want to remove cover and make sure all your memory and device ... E-Machines eMachines Desktop PC

Computer wont turn on


You might try turnin yer PC off & unplug. Then open the case & carefully remove the battery. Let sit for 5 min. Re-install the battery & put it back together. Plug in & turn on. IF you get a screen givin you the option "last known ... E-Machines eMachines Desktop PC

Emachine shut down


I have an emachine T3646 that is relatively new, when I hit the power button on the front it flashes and makes a solid beep but wont turn on, has anyone else had this problem? ... E-Machines eMachines Desktop PC

T3624 MB not turning on


Try to reset and clean the memory located in mainboard memory slot, that is the first ideal step to fixed that problem ... E-Machines T3624 PC Desktop

Emachine Wont Load Windows


Delena \015\012problems like this is associated to RAM malfunctioning.\015\012\015\0121.your RAM might not be sitting properly on the RAM slot,you will need to resit the RAM by opening the system unit and remove the Ram and resit it ... E-Machines eMachines Desktop PC

Replaced dead power supply computer still dead


Hi\015\012most power supplys are protected against faults when they are connected to damaged equipment\015\012so it possibly just protecting its self\015\012\015\012disconnect everything from the PSU except your MB\015\0 ... E-Machines D2046 PC Desktop

When i turn on my pc the desktop dont show


Go to Start > Programs > Accessories > System Tools > System Restore.Follow the prompts and select a bold date prior to when your problem first appeared. The system will reboot and with luck, the scanner will work. ... E-Machines eMachines Desktop PC

Emachine Wont Load Windows


... E-Machines M6805 Notebook
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4843 seconds