Having problems with your E-Machines eMachines Desktop PC ?

Is it ok to turn an emachine on its side and place the monitor on top?

Answers :

Yes it will perform fine. However, use care in using cd or dvd discs...make sure they are inserted correctly or it may damage the disk or the drive. Also be sure to allow enough area for proper cooling aroung the exhuast fan.
Repair Help & Product Troubleshooting for E-Machines eMachines Desktop PC

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Monitor stays on for a few seconds then goes out

This problem is very often caused by dry electrolytic capacitors on the inverter board. If you have some skill with soldering you could try to change them. When buying new ones ask for LOW-ESR capacitors for switching mode power supplies (SMPS) and 1 ... Acer AL1711 17" Flat Panel LCD Monitor

The power light blinks solid blue every four seconds or so (it?s off in-between). The screen is blank. None of the buttons on the side function (such as ?menu?). I have a second similar monitor from the computer in the other room I?m using to type this proving the video card and cable are fine. We?ve always (as in years) left the monitor on (w/ a screen saver) but for whatever reason turned it off for four days when we went away recently. The monitor would then not turn back on. After leaving th

Hello,\015\012Two days ago I received a Gateway 900w FDP1975W Monitor from a friend. He told me that he would have to let it rest and it would work for about a hour or so and flash green with lines, then Flashing blue power light, then nothing. ... Gateway FPD1975W 19" LCD Monitor

When I turn on my Sceptre monitor it stays on for a few seconds

This seems to be a comman fault with alot of monitors, the problem is caused by faulty componants on the power board called capacitors.If you have soldering skills and a bit electronic knowledge its an easy repair and one that you could t ... Sceptre Computer Monitors

My e-Machine W3115 automatically shuts down multiple times

1) Computer off, and unplugged from power. (Unplug from the surge protector FIRST, then unplug the power cable out of the power supply)2) Work on a table where you have plenty of room.Open the computer case. (Rear of computer, ... eMachines W3115 PC Desktop

Monitor turns off after 2secs power light on

Oct 23, 2009- This is how it went for me..I have a Samsung SYNCMASTER ... Samsung SyncMaster 914V 19" LCD Monitor

Opening the dell 1707FP monitor - PC Desktops

To open the case, do the following:1. Remove the base from the back of the monitor by pressing the large black button on the back.2. Remove the 4 large black screws located under the plate you removed in step 1.3. ... PC Desktops

The monitor will not power on.

Lucky you - You bought an L1906 Monitor from HP and one day all of a sudden, the Green Power LED just didn't turn on anymore. The Monitor appears to be dead!\015\012\015\012Why? \015\012\015\012Well I suspect it is because HP ... HP L1906 19" LCD Monitor

Emonster 600 won't boot up

You should not loose any information seeing that all information is held on your hard drive. As for changing out the processor, it seems pretty intimidating but is rather simple. When you have the side of the computer removed and can see into th ... AMD eMachines Desktop System w/ 17'' CRT Display, 2.0 GHz Athlon 64 3000+ (W3400)

My Samsung SyncMaster 2463UW no longer auto detects the video input. I normally use it with my MacBook Pro - I turn it on, it detects the digital output and Bob's your uncle. Today, I turned it on and it continues to cycle through analog, digital and HDMI input sources. However, I can actually see the correct output when it switches to ''digital'' mode - it just won't stay there.

OK UncleBob...Try this for me..does hitting the menu button on the monitor do anything for you?..NO huh...Do any of the other buttons (besides power) do anything for you?..Probably not?! Your in the early stages of my fixed problem...Is your warranty ... Samsung SyncMaster 753S 17" CRT Monitor

Monitor dark for 20 minutes before turning on

\015\012My VL1919 has been having this issue off and on for a month or so now. It happened three times in one day today, so I decided to do something about it. I opened up the monitor and poked around a bit.\015\012\015\012I found three e ... Princeton Digital VL1916 19" LCD Monitor

When my desk top appears on screen, the screen suddenly goes blank it also happens in the middle of when i am conacted to the internet

How old is the monitor? Under warranty? If the monitor is an LCD unit and several years old, you might be looking at a new unit--does the screen go black or loose all data and turn blue or white? If it's going black, you can check to see if it ... E-Machines Computer Monitors

The monitor turns off and on repeatedly.

I have been repairing LCD monitors for several years now. i work as a technician in a steel plant and we have hundreds of these in service. What i am finding is that it doesn't Matter what brand it is or what model. If the Screen is flashing on/off/o ... Acer AL1715 17" LCD Monitor

Is it ok to turn an emachine on its side and place the monitor on top?

Yes it will perform fine. However, use care in using cd or dvd discs...make sure they are inserted correctly or it may damage the disk or the drive. Also be sure to allow enough area for proper cooling aroung the exhuast fan. ... E-Machines eMachines Desktop PC

AOC lm929 monitor

AOC LM929 or Envision EN-7100 removal instructions:DANGER!!! UNPLUG and allow the monitor to discharge before servicing.with a small flat head screwdriver, insert into the edge and pop open the small plastic pieces ... Computer Monitors

Start up problem

Generally, that loud beep you hear is your BIOS (the part of the \012computer that turns on everything else) alerting you that there is a \012serious error with it's ability to function. Just for example, the beep \012could be due to your RAM not bei ... HP Pavilion dv2000t 14.1" Notebook Laptop PC (Intel Core 2 Duo T5500 1.66 GHz, 1GB RAM, 100GB HDD, D... PC Notebook

LG Flatron L1932TQ won't turn on

I have the exact same problem. Just like Ptepe, I also found the 680uf/25v and 1000uf/16v capacitors in positions c203 and c204 on the Power Supply PCB to be bulging on the top. I considered replacing all of the electrolytic capacitors on the board, ... Gateway FPD2275W LCD Monitor

Gateway LP2207 Monitor/black/clicking noise

It may be fixable, I do quite a few of these though ebay. Power spikes can sometimes travel to bad places .\015\012\015\012If you don’t have the startup\015\012sound when you plug it in, the main board may be bad. ... Computer Monitors

It turns off for no reason unexpectedly - Toshiba Satellite A105 Notebook

Is the Air Intake Duct dirty? (Bottom of laptop where air is drawn in)If so, this is an indication that the entire cooling system is dirty, as well as the other components inside the laptop.[Laptop off view the bottom. Laptop ... Toshiba Satellite A105 Notebook

I need to install a keyboard for a Dell Inspiron 1525. I need step by step directions

Before you begin, Follow these steps carefully;\015\012\015\012Shut Down to turn off your computer. Ensure that the computer is off and not in a power management mode. If you cannot shut down the computer using the o ... Dell Inspiron 1525 Laptop Jet Black

How to fix a dell monitor dimension 2400 power button broken

The last guest left us hanging with, "easy fix" so, I ventured ahead to see what I could see by opening up my lcd, which was a puzzle in itself. After UNPLUGGING the monitor and removing the stand and the 4 obvious screws in the back, turn the monit ... Dell Dimension 2400 PC Desktop

Screens playing up

Let me give you the link to the free download of the Service Manual, for the Compaq Evo n1010v series of Notebook PC's, to start,http:// ... HP Compaq Evo Notebook N1015v (470046-573)

No picture LED Flashes

I just did this to a friends monitor as well, a different model and not much different in build. I think you might have 3 screws on lower back side of cover. Start your separation from the bottom of the frame.Your power switch will remain on the fron ... Samsung 226BW Monitor

Emachines model T1862 WILL NOT START

Do any lights come on, or any activities? It is possible that your power supply has bummed out from old age or either powercut and surges , you need to open the tower(box) casing and check wat happens when you turn it on,if nothing happens then you ... E-Machines T1862 PC Desktop

Mitsubishi monitor is distorting the picture

Well first af all ,you never find this "loose wire" because it is a mith.\015\012what you have is a "cold solder" in the vertical IC, if you have a solder iron , and the ability to open it (without scratching),\015\012and then take off all the shiel ... Mitsubishi Diamond Plus 73 17" CRT Monitor

Kds 917s lcd monitor

Yup, that's correct. The capacitors are very cheaply made. I recommend replacing them all if applicable. Before replacing them you must allow the capacitors to discharge. You can just unplug the monitor for a few days. A manual way is possible. I wil ... KDS K717s 17" LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.8082 seconds