Having problems with your E-Machines eMachines Desktop PC ?

Where can i get an emachines motherboard

\015 I need a new motherboard for my emachine t6532..where can i get one?\015

Answers :

Go to http://www.emachines.com/support/product_support.html?cat=Desktops&subcat=T Series&model=T6532 There you will find all specs and downloads for your machine. Then once you get the motherboard type you have you can go to tigerdirect to find motherboards.
Repair Help & Product Troubleshooting for E-Machines eMachines Desktop PC

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

T2893 desktop did not power on when I hit the power button


If you can find someone that has the same model, that is the best way to make sure it fits. Some other motherboards will fit, but you may have to do some work to get them to fit. The best way would be to try to do some research on your particul ... E-Machines eMachines T3830 PC Desktop

Cpu upgrade , please help


Tech-gu818, When looking to see what processors a computer will support, try to find out what motherboard chipset is on the motherboard, and the processor socket.The motherboard chipset is the;1) Northbridge chip2) ... E-Machines eMachines Desktop PC

Not turning on, has power and everything


Do any of the fans spin at all, as though it's attempting to boot up? If not, then double check your power supply to see if it has a switch on it and if it does then make sure it's switched into the ON position. If so, then I would recheck the power ... eMachines T3604 PC Desktop

Had virus so i went in to reboot by deleting all data. ran all 5 cd's and as was reinstalling it kept freezing up so would have to hold button in to restart. now all i get is a blank or blue, black, or blue screen w/ black lines ,that is if i can get it up and running. now it won.t start at all but the fans come on


Well, if you cannot get anything to happen except for hearing the fans spin up, then my guess is that the motherboard is probably bad, which is a fairly common thing for eMachines. You should at least get the POST (power on self test) screens, usuall ... PC Desktops

Wires from switch came unplugged (white and black) where do they


Power On switch (Button)? Restart switch? Speakers?Wires came loose from the motherboard?Should like you to see if you can trace the wires back to the front panel, (Where the Power On button is located Granted, this may be a little tough ... E-Machines eMachines Desktop PC

Where can i get an emachines motherboard


Go to http://www.emachines.com/support/product_support.html?cat=Desktops&subcat=T Series&model=T6532 There you will find all spec ... E-Machines eMachines Desktop PC

Emachine D2880 no power clarification


Your getting power to your PSU, via the green light on your mobo. \015\012verify the PSU has a green light(most emachines do) \015\012it sort of sounds stupid but, check the connection of the cable coming from the front of the case(the wi ... E-Machines eMachines Desktop PC

IBM ThinkCentre 8183 (M51) does not boot


The situation you describe is usually 1 of 2 things, Power supply (PSU) or Motherboard (mobo).Situation #1: If you get a blank screen and no sounds or movement it either indicates that the power supply unit (PSU) has failed or something o ... IBM ThinkCentre M51 PC Desktop

I accedentally knocked the power wires off inside the big box i cant think of the name on my emachine w3507 how do i put back together


Power On switch, (Button), wires from the front panel that go to the motherboard? I could really use the name of the motherboard, to try to get you this information. I don't have an eMachines W3057 sitting in front of me, at the mom ... eMachines W3507 PC Desktop

Monitor reads: PC entering power saving mode then shuts off;PC on


First do not take the hard drive out and put it in another computer. It is configured to run in the computer it's in.\015\012\015\012Next, you probably did have a power surge either from your power supply or the power in your home. It s ... HP Pavilion a810n (PP164AA) PC Desktop

I recently moved my computer into my new condo and have not been able to use it since. The problem seems to be with the monitor. I turn on the computer and the fan comes on but the monitor displays "no signal" and then goes dark but the light one the front still flashes indicating it is getting power. The last time I moved my computer from one room to another, the monitor suddenly couldn't/wouldn't display colors accruately - no red. Attempt to adjust the color by using the monitor's controls we


Lack of video signal is usually 1 of 3 things, Power supply (PSU), Video card or Motherboard (mobo).Situation #1: If you get a blank screen and no sounds or movement it either indicates that the power supply unit (PSU) has failed or somet ... E-Machines eMachines Desktop PC

EMachine no power


Ok for a start the power switch is not green and white that is the power led, you need to look for a red and black wire normally marked on the connector and motherboard as pwrsw or pswitch.\015\012if you believe it to be the switch unplug the c ... E-Machines eMachines Desktop PC

My emachines EL 1200 desktop stopped working during bad storm


You can try to reset the computer by removing all power sources and letting it sit for a time. Then powering it back up and see what happens. That's called a hard reset. \015\012I am guessing that the storm surge damaged your motherbo ... PC Desktops

No video signal to Monitor.


Lack of video signal is usually 1 of 3 things, Power supply (PSU), Video card or Motherboard (mobo).Situation #1: If you get a blank screen and no sounds or movement it either indicates that the power supply unit (PSU) has failed or something o ... E-Machines eMachines Desktop PC

My pc beeped twice and nothing came


Lack of video signal is usually 1 of 3 things, Power supply (PSU), Video card or Motherboard (mobo).Situation #1: If you get a blank screen and no sounds or movement it either indicates that the power supply unit (PSU) has failed or somet ... Dell Dimension 2400 PC Desktop

Emachine t3524 keep restarting - E-Machines eMachines Desktop PC


Suspect bad Electrolytic Capacitors, in the motherboard Voltage Regulator circuit, of the motherboard. eMachines motherboards are known for having bad 'Caps'. Low quality, due to poor quality of components used in the capacitor. ... E-Machines eMachines Desktop PC

EMachine W3107 will not boot, no display.


Have you tried a different Graphics Card, looks to me like the onboard graphics card is at fault, there should be an AGP slot or PCI slot that you can plug a new Graphics card into then you should be fine... ... PC Desktops

The lights are on, but nobodys home


Im having the same problem with mines, so im on my laptop now. I've done some research and it turns out that eMachines has a habbit of blowing out their motherboards, and that its being caused by the design of the case for which the board sits on. So ... E-Machines eMachines Desktop PC

I have an emachines t5082 and tried installing 2GB (2x1GB) they are a 2-pack, DDR2 6400's The board sees 1GB but when I put both in it won't even give me a boot screen or anything, just a black screen. Is there a bios update? and where can i get it, i've already tried emachines/acer and neither want to help me. They say they can't give me what i am wanting and want me to go spend my money on having someone look at it.


EMachines recommends DDR2 at 533MHz.(PC2-4200)A lot of ram memory manufacturers, state you can use DDR2 at 667MHz. (PC2-5300)This is a logical statement due to the fact that a lot of motherboard chipsets, (Northbridge ch ... E-Machines T5082 PC Desktop

Emachine t2642 power supply - PC Desktops


Apparently this model has a bad motherboard, which manifests as a power warning and eventually a refusal to boot up. You can replace the power supply (as far as I know, any generic one 250-watt or better will work) but it's unlikely to help. You can ... PC Desktops

Emachines doesn't start


Thank you for choosing Fixya.com It could be a number of things but what i believe its going to be is the motherboard. The motherboard is not getting the power probally because the connections are bad. Are you getting any beep codes? or ... E-Machines T3410 (RBT3410) PC Desktop

Where can I get a replacement motherboard for emachine T2984?


Here is a site where you can buy one for a relatively good price....hope it works out. ... E-Machines eMachines Desktop PC

Emachine motherboard no model number


Check out this site provided for a program called SIW. Download the free english version and install. It will tell you everything about your computer that you ever needed to know. Check the motherboard section for your specifics, and try the sound ... E-Machines eMachines Desktop PC

Bad power supply, installed new one, get green light on mother board; but doesn't boot up. Bad start up button?


Yes, it is my belief that it is the Power On button. To test this, there is a simple solution. I however, would like to caution you at this point.You will have the power supply plugged in. There will be a small spark. I wouldn't advise how to t ... PC Desktops

Emachines notebook m5310 corrupted bios recovery


Solution 1: Boot-block BIOSModern motherboards have a boot-block BIOS. This is small area of the BIOS that doesn't get overwritten when you flash a BIOS. The boot-block BIOS only has support for the floppy drive. If you have a ... PC Laptops
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.9227 seconds