Having problems with your E-Machines eMachines Desktop PC ?

Monitor only has a black screen, when i turn it on the power button turns from blue to orange and the screen says no signal and then turns black

Answers :

The computer is not turned on or is defective or the PC to Monitor connection is loose, or cable is faulty. Connect computer to another (working( screen, or the screen to another (working) computer. This will help you determine which of the hardware (PC or Monitor) has a problem.

Hope it helps.
First open cpu cabinet Refix RAM memory .
\015\012Then pull cmos cell from motherbord for 10 minutes so all settings are defaults.
\015\012Then when power up the computer press F8 key then enter in enable vga mode.
\015\012Then go to control panel and display proeprty then settings change screen resolution to 1024*768 then apply and ok.
\015\012Then restart the computer.
\015\012Let me know if you need more assistanse.
Repair Help & Product Troubleshooting for E-Machines eMachines Desktop PC

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Massive series of problems with IBM Thinkpad

Probably itz either minor case of software corruption/improper ground/cpu fan..or major case of faulty or defective main board/ram/addon/daughter cards....plz do check the following as in order:..the Hardwa ... IBM ThinkPad R40 2897 Notebook

Monitor only has a black screen, when i turn it on the power button turns from blue to orange and the screen says no signal and then turns black

Hello,The computer is not turned on or is defective or the PC to Monitor connection is loose, or cable is faulty. Connect computer to another (working( screen, or the screen to another (working) computer. This will help you determine which of ... E-Machines eMachines Desktop PC

Digital Power Saving Mode

Go to your monitor power settings and turn off Hibernation and other monitor power schemes.\015\012\015\012If this problem persist, request for more technical assistance from the manufacturers website ... LG W2252TQ Monitor

Monitor Display Problem.

The first Polyview has a power supply problem (a short) and locks out the power until it is unplugged. You need to check the voltages inside the Monitor to determine which component/s are faulty. I hope you know electronics if not leave it to the r ... Polyview V17E 17" LCD Flat Panel Monitor

Monitor goes into power saver mode

Take your Agp card with you to the shop. You do not need to go through Gateway, but there are serveal formats of AGP regarding the voltages.\015\012\015\012By the sounds of it you have the newer version of AGP so finding a replacement car ... Gateway 500 X PC Desktop

"analog power save mode"

My sceen does no com on a all .... what now ... LG Flatron L1750S 17" LCD Monitor

Cannot start up the laptop

Hi there.That really quick flash of a blue screen is the blue screen of death and there is a possibility that the error could be memory related.What you have to do is remove and clean the system memory and the slots the memory goes into. ... Toshiba Satellite A105-S171 Notebook

Monitor comes up shows "acer" then says no signal and goes black

This Problem is Acer(s) Monitors. Though it is a nuisance one fix That has work for many is the Unplugging after it goes back to Good (viewable) screen. I have hooked mine up to an inexpensive Power strip to make it easier for me and just turn ... Acer X241Wsd Monitor

Gateway monitor FPD1975W won't display

Same problem - unplug both computer and monitor - hold power button for monitor for 15-30 seconds...then power it back on and then power on the computer. Seems from other sites there is a power issue with the monitor - this worked for me. ... Gateway FPD1975W 19" LCD Monitor

Fujitsu-Siemens P15 TFT power/picture problem. it take time to turn on.

It does indeed sounds like the capacitors, I had this problem last year with a Medion monitor where it would turn on and off, when I spoke to Medion they did say that it would need a repair but at the time I wasn't enclined to pay the repair fees for ... Fujitsu Siemens Premium Line P15-1 15" LCD Monitor

Wont go to normal start up screen!!!

The screen that you're seeing is the self-test of the monitor, as it's already stated. It's commonly caused by having no signal coming from the computer to the monitor. You were advised to check the monitor cable, if you have already done that, then ... E-Machines eView 17f3 17" Flat CRT Monitor

Gateway LCD powers on but has no picture

I have a Gateway FPD1730 LCD monitor. When I plug it into my Gateway 500x desktop the power light turns green and then says "Power Saving Mode" and then it goes black. It will occasionally flash on and have a picture and then go off. When I unplug th ... Sceptre X9G Komodo IV 19" Flat Panel LCD Monitor

Blank/black screen at power on

I just repaired mine with the exact same problem. Here is the repair! Turn off comp with power botton. After shut down turn back on. You will get Dell screen then windows logo. If windows is saying resuming windows thats your problem. It is trying ... Dell Inspiron 6000 Notebook

Lcd monitor power light flashing with no img. seems 2 be frozen

The display is in safe mode and you will need to reset the display to get the display out of the safe mode. There are 2 different model revisions. Please choose the method that will match your revision. Depending on the revision of the monitor, one ... Planar PL1910M (Black) 19 in. Flat Panel LCD Monitor

Dell E171FP Monitor goes black after 2 secs

Hi, I don't think the problem is with your monitor. Your monitor sounds like it's doing exactly what it's supposed to do. The monitor is supposed to turn off if there's no cable attached, which means there's no signal input. When the screen goes b ... Dell E171FP 17" Flat Panel LCD Monitor

I have a Cornea 1702. It just stopped working altogether. It doesn't even show the menu nor does it search for a signal as it used to while scrolling thru options or select input! I think it's fried, but I remember some time ago i thought it was all done then it started working again. any thoughts?

OK, first off, I'd like to say that I've never worked on the Cornea 1702, but most monitors follow similar designs, especially generic brand monitors.So there are a few things I need to know: What exactly happens when you press the ... Cornea CT 1700 17" Flat Panel LCD Monitor

No signal pops up on the screen

Make sure your cables are tight. make sure you have the correct input selected on your monitor. swap your monitor on the pc with one from a freind that works. this rules out your graphics card and the pc. if all of these are correct you probably have ... Acer 22" X223w LCD Monitor

Possibly Video Card problem?

Mikolan,That is so crazy.You say you previously was able to see the POST screen and now you can't?You say you switched monitors and card outputs to no avail? Is the card an ATI with an aux Molex power connector?Is the pu ... PC Desktops

Blue Screen of Death, but not quite

Hard drive is a main failure concern, check to ensure power supply is plugged in. sounds like you have a corrupted rgistry file-locate OS for that unit and hit ''repair'', should solve the problem. ... Acer Aspire 5100 Notebook

The power light blinks solid blue every four seconds or so (it?s off in-between). The screen is blank. None of the buttons on the side function (such as ?menu?). I have a second similar monitor from the computer in the other room I?m using to type this proving the video card and cable are fine. We?ve always (as in years) left the monitor on (w/ a screen saver) but for whatever reason turned it off for four days when we went away recently. The monitor would then not turn back on. After leaving th

Hello,\015\012Two days ago I received a Gateway 900w FDP1975W Monitor from a friend. He told me that he would have to let it rest and it would work for about a hour or so and flash green with lines, then Flashing blue power light, then nothing. ... Gateway FPD1975W 19" LCD Monitor

PC or monitor, signal problems

Your monitor is telling you it's on it's last legs..either that or your compaq has a bad video section. either is more vital than a video cable being loose. ... PC Desktops

Gateway MT3421 Laptop start-up Issues

Start by removing the battery completely, and plugging the power cord into the wall socket. If the power indicator light comes on at the converter on the cord, your power cord is fine. Then plug the power cord into the computer. If the computer star ... Gateway MT3422 RTL Notebook

Screen stays either black or white

Replace the entire DAC board (board with power suplly going into it) for easiest solution. ... ViewSonic VA703mb Monitor

Monitor comes up shows "acer" then says no signal and goes black

The interface between the monitor and the cable might need replacement. Please check it. ... Acer AL2016 W 20" TFT LCD Monitor

Flatron W2252TQ goes into 'power saving mode'

I had a similar problem with an LG monitor that I resolved by connecting the analogue cable as well as the digital cable from the pc. This problem must be caused by the monitor not receiving a digital signal. ... LG W2252TQ Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.9868 seconds