Having problems with your E-Machines eMachines Desktop PC ?

Cyclic redundancy error

\015 I am getting cyclic redumdancy error at the time of copying data on pendrive Even after formatting after some time this message appers on 1GB pendrive while copying data. What is the solution.?\015

Answers :

Run a disk check on the pendrive to flag and correct any bad areas, try the copy again, and if you still get the message, run a check on the drive from which you're copying as well. (If this is Windows and you're copying from the "C" drive, you'll need to schedule the check at reboot, which the utility will prompt you for.\015\012\015\012To do the disk error checks (in Windows), right-click on the disk in the "My Computer" view and click on "Properties". That'll bring up a tabbed dialog --- click on the "Tools" tab, then click on "Check Now" under the "Error Checking" area. Enable all checkboxes, then click "Start". If prompted, click "Yes" or "OK" to schedule a check at reboot.
In simple terms, a CRC is bit of mathematics used to ensure that your data is OK when being transfered. It's a checking procedure that quickly identifies when data has been damaged. If you get this message, it means that the file being read by your PC or software is corrupted. However, it does not mean all the data is lost forever. When data is transfered, it is usually in small blocks and each block is given a CRC value. If something goes wrong with the data between the time it leaves the source and arrives at its destination, the CRC sent at the source will no longer match the one that is calculated when the data arrives - this is when the cyclic redundancy check error will appear,
\015\012
\015\012
\015\012All of the above is true, didnt write it myself copied it from a good friends post. It is probably the data itself that is corrupted. Doesnt mean the data is gone. Try running a disk defrag, if that doesnt work try copying it to a cd/dvd and see if you get the same error. If you dont, flash your bios. This should explain your problem, if it doesnt follow up with me, email address is kustom42 at gmail.com.
Repair Help & Product Troubleshooting for E-Machines eMachines Desktop PC

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Cyclic redundancy my fault for not stating that the installer is not on CD its straight from the site. why do i keep getting the error no matter where i download the installer from? and how do i fix it?


A cyclic redundancy check (CRC) is a non-secure hash function designed to detect accidental changes to raw computer data, and commonly used in digital ... Dell Latitude D620 Laptop (Latitude-C620) PC Notebook

Re-installing xp I am trying to reinstall windows xp pro onto my dell latitude d600. Part way through i get a fatal error message which says- prevents set up continuing.one componant couldnt be installed. Data error (cyclic redundancy check.) Help alipali


A cyclic redundancy check (CRC error) is an error checking program that is used to verify data and can be caused by hardware or software. The most common causes are bad CD disk, hard drive or memory. To run diagnostics pr ... Dell Latitude D600 Notebook

Data error cyclic redundancy check. I have windows XP.How do I fix this?


Your disc is scratched. That error will come up when it happens. Try to clean your disc. get all the fingerprints off of it. ... E-Machines eMachines Desktop PC

I keep getting a "cyclic redundancy check error"


Hi,It could be a few things that's wrong.Check that the lens on the CD drive is clean and also make sure that the install disk is clean and free of scratches and then try to reinstall the game again.There could also be some bad sect ... E-Machines eMachines Desktop PC

Need to burn data DVD. After 98% complete it said : could not finish " All-in-one"" and Recording failed.


What software are you using to burn your data DVD? And Did you try burning the project a second time with the same results? If you did not try it again as you might have had a defective disk. This can also be caused by a cyclic redundancy ... PC Desktops

Cyclic redundancy error


Run a disk check on the pendrive to flag and correct any bad areas, try the copy again, and if you still get the message, run a check on the drive from which you're copying as well. (If this is Windows and you're copying from the "C" drive, you'll n ... E-Machines eMachines Desktop PC

A problem with installing lego creator harry potter.


Try cleaning the disc first. There may be dirt or fingerprints interfering with reading it. The CRC error means the data is not being read correctly. If the error continues and this is a game you recently purchased, I would recommend returning it to ... LEGO interactive LEGO Creator Harry Potter for Windows

Hello i tried to insert files to my western digital elements 500 gig hard drive and after a few minutes an error message say cannot copy the file and the cause is either cyclic redundency error or I/O error and the also it crashes the window explorer. The HD is under fat32. i have tried fragmentation but it still does not work.


Hi!\015\012\015\012\015\012What OS you are using?\015\012If is new hard drive try to configure/format the hard drive then check it if it detected 500gig. ... PC Desktops

Does Emperor RotMK work with Windows 7?


I have Windows 7 32bit and was able to successfully install Emperor ROTMK. I used to get that error with an old disk I had. it was because my disk was damaged. ... Sierra Entertainment Emperor: Rise of the Middle Kingdom for Windows

My computer is running very slow. So I ran test of my Maxtor 6Y160M0 hard drive using the computer's "PC-Doctor" software. The 'linear' test failed, giving me an error code the instructions said I should give to a technician. The code was 2811-201. When I reviewed the Log File from the test, I found an entry stating "Error reading block number 257199000 (of 320159385): Data error (cyclic redundancy check). What should I do?


The drive is going badTry to format the Maxtor.NOTE: obviously backup all important data to a removable drive or CD.You will have to reinstall windows. so before doing this, make sure that you have the cd and Product key (usually on ... PC Desktops

Trying to install the sims and it installs for the first 3% the an error message comes on saying... Component - GameData File Group - GameData_ALL_Recursive File - E:Setupdata2.cab Error - Data error (cyclic redundancy check).


Either the disk is damaged or the optical drive is going bad. ... PC Desktops

Rainbowsix vegas when i tried to install game got this error mess. newfuture1 map 01_mexico data4.cab cyclic redundancy check what do i need to do to fix help?


Is it from a disk? If so give it a clean, dry it and have another go. If it still errors get Windows to error check it - right click and look in 'properties'. If it's not from a disk check the file with your anti virus (right click and scan) ... PC Desktops

Recovery when trying to recover with discs...system states cd-rom read error


This is a READ error known as a CYCLIC REDUNDANCY READ ERROR.If the CD ROM is not able to read from the disc .. it gives u this errorThis can come due to many reasons1. OLD CD ROM - not able to read data properly2. CD with lo ... PC Desktops

When I try to copy Outlook data from the DVD to HDD it is getting an error '' cannot copy Outlook: data error (cyclic redundancy check) kindly do the needful to resolve the issue. Thanks & Regards Abhiram


CRC error indicates bad sectors, try one thing:\015\012open the data file from outlook and from there create a new pst on the destination and copy the mails, you may loose some mails but the rest of the data will be safe ... Computer Utilities & Maintenance

Moving files from Windows xp


The file on the hard drive is corrupt, run scandisk and fix the file error, but the video is likely a loss ... Dell Dimension 8100 PC Desktop

I have a an image ......but when copying it to another drive it give me a message "data error cyclic redundancy" i really need this file , can you help me plz .. thnkx


I am very sorry to say the drive( I think its a floppy) is corrupted. Try using Scandisk (Tools tab on Disk properties, then error checking). But that too has limitations and I won't guarantee it will solve, still trying does no harm. ... PC Desktops

DVD Movie Album SE 4.1 and DVDfunStudio


Have you tried clicking "Preferences" - "Device Setting" - then "Drive Select" - if you have a DVD burner and the camera you must select which drive you want to read from (took me a while to find that one out),,, Hope that helps. ... Computer Utilities & Maintenance

ERROR 0175 BAD CRC1 COMMAND STOP POST TASK


The crc is the cyclic redundance check your bios is corrupt. you will need to flash the bios to bring it back the internal bios bottery will need to be removed for 1 min then replace. it should bring it back if not you bios chip has burnt out. i have ... IBM ThinkPad T60 Notebook

Im tring to install the game when an error pops up it say Component transfer error Default component D:data2.cab cyclic redundancy check I click ok and it kiks me out of the instal wizard any sugestions on a fix for this


The dvd is most likely dirty clean it with soapy water an rinse with water dry thoroughly with a soft cloth also try shutting the unit down and restarting a number of times until it loads, if the unit works with other games no problem chances are it ... Hasbro Interactive Axis and Allies for Windows

Ibm notbook. how will i solve "bad crc1, stop post task. with an error code 0175?


The POST error code 0175 refers to a CRC (cyclic redundancy check) reading from the EEPROM chip, that data is corrupted, most likely a faulty EEPROM chip. This is a motherboard problem and cannot be fixed except by a motherboard replacement. This is ... IBM ThinkPad A21e 2655 Notebook

Error 0175: Bad CRC1, stop POST task - IBM ThinkPad T20 2647 Notebook


Crc (cyclic redundancy check) error can be fixed. the check sum on the\015\012chip has been corrupted. the content of the eeprom must re-written back\015\012to the chip after correction. for more info, check this:www.password-removal.com ... IBM ThinkPad T20 2647 Notebook

IBM Thinkpad r51 unable to recover/restore


Hello, \015\012\015\012In restoring your computer factory defaults it enables your computer to\015\012set its first default settings and eventually all your data stored in\015\012your computer will automatically erase. So then you purchas ... IBM ThinkPad R51 Notebook

Fan flow error 1611 I/O


The\015\012ProLiant DL380 G3 server requires that both primary and redundant fans\015\012exist in a specific configuration in order to perform optimally. Any\015\012deviation from the specified configuration will cause one of the above\015\012error m ... HP Compaq ProLiant DL580 G4 (430811001) Server

Cyclic redundancy error when i just copy files to my pen dive. Can anybody solve the problem?there no problem with files or hard disk!!


Check for scratches.. or anything like if there is none.. \015\012\015\012use isobuster.. \015\012\015\012it should retrieve all teh info\015\012 ... E-Machines eMachines Desktop PC
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2297 seconds