Having problems with your E-Machines eMachines Desktop PC ?

The tower wont turn on - E-Machines eMachines Desktop PC

Answers :

Check your power supply. Most common reason for your problem is that the psu has died. Also near your main psu connection on the motherboard should be a little led light. If your board is getting a proper power connection/supply that light should be green. If not it will either be off or red. If it is green then the problem may be your motherboard. If it is red or off then it is most likely a bad psu. Replace with a compatible psu & you should be back up & running. Hope this helps.
Repair Help & Product Troubleshooting for E-Machines eMachines Desktop PC

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The tower wont turn on - E-Machines eMachines Desktop PC

Check your power supply. Most common reason for your problem is that the psu has died. Also near your main psu connection on the motherboard should be a little led light. If your board is getting a proper power connection/supply that light should be ... E-Machines eMachines Desktop PC

My emachine desktop is not not coming on

I've owned nothing but e-machines towers for probably 9yrs. I've had this exact problem with two of them already. E-machines are notoriously known for power supply problems (which is usually about a $50 fix), but oddly enough the two problems I've ... E-Machines eMachines Desktop PC

Emachine t3524 keep restarting - E-Machines eMachines Desktop PC

Suspect bad Electrolytic Capacitors, in the motherboard Voltage Regulator circuit, of the motherboard. eMachines motherboards are known for having bad 'Caps'. Low quality, due to poor quality of components used in the capacitor. ... E-Machines eMachines Desktop PC

Emachines desktop Wont boot. - E-Machines eMachines Desktop PC

A simple and effective task (well most of the time) is to reseat components on the motherboard. This can include unplugging the components, including but not limited to:Hard Drive and Optical Drive CablesIDE/SATA ConnectorsSys ... E-Machines eMachines Desktop PC

The start up screen wont come up! - E-Machines eMachines Desktop PC

As soon as you turn on your system....try pressing F8...try to turn on your system in safe mode ... E-Machines eMachines Desktop PC

How do i use my camera on my computer - E-Machines eMachines Desktop PC

\015\012my mommy wont let me download this software what should i do\015\012dhgfhdg\\\015\012vcdvch\015\012fgvfdgf\015\012fdgf\015\012 ... E-Machines eMachines Desktop PC

Compaq presario sr1950 nx desktop - won't start

Hopefully you didn't discharge any static into the machine. Try pulling out your memory sticks and turning the machine on. If you hear a repetitive beeping from the computer it's good sign. Turn off the machine. Put the ram back in and locate th ... HP Compaq Presario SR1950NX PC Desktop

Emachine t5026 on and right off

Hi maybe you could try these steps I'm always doing when I experience the same problem as yours. This is only according to my experience fixing desktop computers.1. Try to disconnect all the connection at the back of your computer tower t ... PC Desktops

T2893 e machines wont turn on

Since you are looking inside, try this. Trace the wires that come from the power switch back to the Motherboard. The wires from the switch will connect to two pins on the motherboard. Carefully jump those two pins with a screwdriver and the machin ... E-Machines (T2824) PC Desktop

Tower has no power not even the fan - E-Machines eMachines Desktop PC

Be sure all power outlets are turned on, and the power cable is inserted properly into the computer. ... E-Machines eMachines Desktop PC

Power suply the computer wont turn on - E-Machines eMachines Desktop PC

If the power supply is a Bestec ATX-250-12e then most likely the power supply has killed the motherboard. You will have to replace both the power supply and motherboard. ... E-Machines eMachines Desktop PC

I have a Emachine W3650 And it wont start up what do i need to do ?

If it's completely dead when you turn it on, you probably have a bad power supply. They're fairly easy to replace and not too expensive unless it's proprietary to your machine, some are. Most towers will take a universal type power supply. Als ... E-Machines eMachines Desktop PC

Emachines t2865 My monitor wont turn on, i have it pluged into the tower, but i dont see a power cord for it? does it have a seperate power cord ?

Most Monitors. Have A Seperate Power Cord.\015\012They vary in shape and size. 2 pin 3pin et,c.\015\012Have a good look at the back, and check. you should have a power connector socket inlet. And a cable out socket, to connect Monitor To ... E-Machines eMachines Desktop PC

Beeping emachine desktop won't turn on

Hi shyguy, Before I address your issue, I figured you ought to know: Buying an emachine is one of the worst moves a consumer can make. Why? because despite the fact that they are cheap, they frequently have problems, which can ... E-Machines eMachines Desktop PC

EMachine T6522 monitor says "no signal input" when turned on. tower switch light on and motor seems to be running. Nothing but above message on monitor. Checked both ends of cable and unplugged tower and plugged back in.

This could be an issue of a video card gone bad. I have experienced the same issue firsthand. This could also mean that no RAM is installed. If you have been using this computer previously, the second option is probably not even an option.\0 ... eMachines PC Desktops

My e-Machine W3115 automatically shuts down multiple times

1) Computer off, and unplugged from power. (Unplug from the surge protector FIRST, then unplug the power cable out of the power supply)2) Work on a table where you have plenty of room.Open the computer case. (Rear of computer, ... eMachines W3115 PC Desktop

My Emachine wont stay turned on

This can b caused by a few different problems\015\0121) The machine can be over heating, maybe due to a bad or slow running CPU Fan.\015\0122) Bad power supply\015\0123) Can b software problem, maybe a Virus\015\012Try turning ... E-Machines eMachines Desktop PC

I have a 2 home desktop computers and i have a very strange problem that is occurring, i'm currently writing you from my laptop, but i just got a new desktop that is only about a month old and when i turn it on it emits a very high pitch noise, never heard this sound before, so i wanted to test something so i unplugged that computer tower and took my other tower and plugged it all into the same location and turned that one on and the same high pitch noise is coming from that machine, so i don't

Yes this can be a power issue since you have 2 computers with the same problem, if you want to really test it you plug the 2 computers on another power outlet and check if you will still hear that sound if not so we're sure that its a power issue alr ... PC Desktops

Last night my laptop disabled my cd dvd ro0m and burner, but when I go to the control panel to enable it again, under the device managaer, it says windows was not able to enable. the disable code is 22. what do I do?

HelloTurn off your machine and then turn it back on, while it is starting up before the windows logo comes you have to tape on F8 repeatedly to get "Advanced Start up options" Screen.From there select Safe mode.In ... Toshiba PC Laptops

E-machines desktop PC will not power up at all

1) Check and see if the switch on the power supply is turned on (if there is one).If it still won't turn on then most likely the power supply is dead. It's not very expensive to replace.The other explanation might be that the powe ... E-Machines T2240 PC Desktop

Computer wont turn on

Hi\015\012Bad news. your motherboard has been fried. You could try refashing the BIOS but I've got $10 dollars to your one that it wont work. Best bet - keep the tower, keep all of the running gear but a new motherboard and prosessor are in ord ... E-Machines eMachines Desktop PC

EMachine Model T3828 No power

Greetings! As the first answer suggests, you must be comfortable taking things apart. I've actually just finished diagnosing the same problem on a customer's computer, and Here's what I did.First, I remove the power plug, open up the co ... E-Machines eMachines T3830 PC Desktop

Always says safe mode when I turn on monitor

... Dell UltraScan 1000HS 17 in.CRT Conventional Monitor

Desktop Lockup Hello. I have an emachines model T2042 desktop and it has started to lock up and the activity light below the power button blinks at a steady interval, and I can hear a rhythmic "knocking" inside the machine. I have to unplug the power cord from the rear of the machine to get it to power cycle, and then turn it on again. It's a Celeron, 2GHZ machine, with 128MB of original memory. Could this be a power supply issue? I know it's an old machine, but was planning on giving to my sist

Remove the cover to look at the power supply fan while it is powered on ( if needed). The fan should be spinning at a steady rate. If you observe fluctuations in the rotation, these are early indications of a malfunctioning power supply unit. As for ... E-Machines T2042 CELERON 2 GHz 128 MB 40 GB HDD Dsktop Computer System PC Desktop

Emachine desktop The computer worked fine one day and the next day when we went to turn it on it would not power up. The monitor comes on and on the monitor screen it said monitor working fine check hard drive. Well I can't check anything because the tower has no power. The light around the button doesn't come on and you can't hear any kind of fan starting. Called emachines and the only thing they could tell me was to change outlets, did that, turn power off (no power) leave unplugged for 3 minu

I understand that your cpu is not turning on and the repairer confirmed that it is the issue with the mother board. I suggest you to please check the smps fan spinning or not. If its spinning then then the issue could be with the mother board. If not ... E-Machines eMachines Desktop PC
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.8162 seconds