Having problems with your E-Machines eMachines Desktop PC ?

Emachine has error system32lsass.exe'1073741819

\015 I cannot get it to boot to my desktop, please help\015

Answers :

You can try booting in safe mode (Press F8 after the initial beep, but before your PC tries to boot into windows.) then run a virus scan, which may fix everything for you.
\015\012Even if you can't boot into Windows, your data is most likely still there. You can take your hard drive out of the machine and temporarily install it as a secondary drive in a machine that works. Since you might have a virus, the very first thing you want to do is run a virus scan on your drive so it doesn't spread to the other machine. Once you clean it up, you can transfer the important data to the working hard drive, re-load your damaged machine, then transfer the data back. A little geeky, so if you don't think you can do it on your own, you'll need a brave, tech-minded friend to hold your hand.
\015\012PS - you can also buy a device that you install your hard drive into that will then allow you to plug it into another computer's USB port, thus eliminating the need to open up two computers. Good Luck!
LSASS dot exe is a TROJAN that allow access from a remote computer.  Run a FULL, DEEP virus scan and you should be okay.
Repair Help & Product Troubleshooting for E-Machines eMachines Desktop PC

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Installation windows xp emachine t5082

You must find "eMachine" XP USB drivers for your computer.\015\012If all USB support is "enabled" in BIOS, the conflict is with drivers.\015\012XP is loaded with many generic drivers, however eMachines is proprietary and requires eMachine ... E-Machines T5082 PC Desktop

Rebuilding emachine - windows 98SE

A C100 error is a registry error. I suggest that U format the drive and reinstall the 98SE. There are programs (bought) available that may fix this problem, but another perferred choice would be to purchase a XP operating system. Boot up on the XP cd ... E-Machines eMachines Desktop PC

I have an eMachine T3410. When it boots, a screen

Well what i would try is typing  "\\minit\\system32\\biosinfo.inf download\015\012in google when you find the download go to system32 and replace the inf with the new one you just downloaded. that should fix the error ... E-Machines eMonster 600 PC Desktop

I'm trying to upgrade emachines pc from vista to win7 but I can't burn the second DVD for the recovery management backup. They don't send software disks with the pc and the win7 disk is only an upgrade. So I won't have a way of reloading OS if needed.

Sorry to jump i here, but i had the same problem with a customers machine, and i found the solution o eMachines website....\015\012\015\012Error code 0x203 may occur when using eRecovery. \015\012\015\012Affected Pro ... E-Machines eMachines Desktop PC

I have a Emachine W3650 And it wont start up

Insert your windows cd and set computer to start from cd. When prompted to, hit a key to boot from CD. Let Windows start the install (relax it is not really installing anything) when it gets to the prompt, tell it you want to Repair an existing ... E-Machines eMachines Desktop PC

RE: Emachine T5048 slow from Ducttapeuser

The one main cause of this type of problem is usually heat. You say that the fans are working, did you check to see if your power supply fan is working? Do you feel the temperature inside the PC to be warmed then luke warm?\015\012Also, McAfee ... E-Machines eMachines Desktop PC

Emachine 17" lcd monitor from Best Buy

... E-Machines e15t 15" Flat Panel LCD Monitor

BIOS "Phlash" Error

Pls run an earlier version of windows xp i.e. sp1 as earlier processor and motherboard may run xp sp 3 but it will not provide 100% compatibility ... E-Machines eMachines Desktop PC

Emachine t series keeps rebooting. Turn the computer on windows logo shows than the emachine logo shows than it shuts down and restarts. It does this over and over. Nothing else. Except when I push F2 or F12 than it goes to the bios. than it will stay in bios until i close it.

Possibly it has a corrupt windows, has lost the boot sector to the hard drive or cannot recognize the drive properly. Usually if that happens the splash screen will show and it will simply reboot. It also depends which version of windows ... E-Machines eMachines Desktop PC

My Emachine T5010 reboots on Windows loading screen.

Before windows loads press F8 on the keyboard to get an advanced menu.choose the option that says disable automatic restart on error and see what error you get.Also try the Safe Mode option.That click sounds like the harddrive is fa ... E-Machines T5010 PC Desktop

Yellow question on sm bus controller, pci device and video controller

For Emachines W3503, download the chipset drivers for ATI Radeon® Xpress 200 at http://e4allupgraders.info/dir1/motherboards/ ... E-Machines W3503 PC Desktop

Stuck on the setup menu

Hello,The error stating failure Disk 0 means your hard drive has died. It sounds like your hard drive crashed and is not seen by your PC, you will need to have it replaced.Buddy ... E-Machines T1100 PC Desktop

Need video driver for Emachine T3604

Need video driver Emachine T3422 ... eMachines T3604 PC Desktop

Emachine will not start up it says fatal error regeristery not updated, then turns off

Linux and UNIX ld command help\015\012\015\012\015\012\015\012\015\012-z defs, Force a fatal error if any undefined symbols remain at the end of the ... ... E-Machines eMachines Desktop PC

Cant install windows vista getting error message in installation

The only thing I can think of for an error of this kind would be faulty media. I would suggest getting ahold of another copy of the Windows Vista Install disc. Note that it matters not what Version the Install disc is, you have the Windows Key you ... E-Machines eMachines Desktop PC

My emachine freezes up at start up

Try starting it in the Safe Mode:\015\012Right after the first text appears on the screen, start tapping either F5 or F8 to access the startup menu.\015\012It won't have much of a selection; typically safe mode, normal and prompt only.\015\012Choose ... E-Machines eMachines Desktop PC

I have a emachines w 3107 I tried to use the system recoverey disk. I went through the whole process, Then when it re boots a error says NTLDR is compressed press alr cont del , And I get the same error Can you help me out THanks

An NTLDR is compressed error is pretty easy to fix(much better then NTLDR is missing errors!).First you need to boot to the recovery console.To boot to the recovery console follow these steps:1. Insert the Windows XP C ... E-Machines eMachines Desktop PC

T5254 I purchased the machine last Thursday. Everything was fine until yesterday. Cd Rom now will not work. I went into control panel and found the device listed. However there is a message that Windows cannot initialize the device driver for this hardware. (Code 37). I tried uninstalling the device, rebooted to have the system add the hardware, and found the same problem and error message.

EMachine's customer service was very good last I had occasion to use it. The keyboard that came with a system had a QWRRTY keyboard (E was missing) and I had the new one by 2nd day air with no return needed.\015\012\015\012I recommend giv ... E-Machines eMachines Desktop PC

IO1_Initialization_Failed error on Emachine

Try starting it in Safe Mode (hit F8 key at boot-up). If you see the error "Page_Fault_in_nonpaged_Area stop", you have bad memory usually. If you have 2 memory modules installed, remove one and reboot. If you get the error, remove that memory module ... eMachines T6524 PC Desktop

EMachine Desktop Computer

This is most likely an issue with the powersupply being faulty, contact Emachines and tell them the error(as well as model and all that). They will then most likely send you a power supply that you can easily install yourself. Its just four screws in ... E-Machines eMachines Desktop PC

Emachines 2792 i have an emachines t-2792 and it keeps restarting itself before windows has a chance to load. it does the post fine and everything. i have tried a windows xp sp2 cd and it kept comming up with its missing files. then i tried the restore software that came with the computer and it seemed to take that but it still won't load windows. i get the xp simbol and then a flash of a blue screen and its restarts.

Pull the power plug as soon as the emacines logo comes on\015\012and if that doesn't work pull out the power as soon as the first windows logo screen comes on. it should then come on and give you the option to start in safe mode or regular mode ... E-Machines T2792 PC Desktop

Machine won't boot to win xp

You have two choices:1) Insert your e-machine system disk and boot from it. It should ask you if you want to install Windows or repair it. Choose R for repair. Then when you get the black screen with white writing, choose your windows instal ... eMachines T3406 PC Desktop

Problem installing sound driver on emachine M2352

I had the same problem after doing an OS reinstall. The owner didn't have her recovery CD and the emachine website audio driver was no good. I was thinking it may of been a hardware issue but after checking all of the cables and finding nothing obvio ... E-Machines M2352 Notebook

Need schematics for front panel , power sw , pwr led , hdd led et

Try this link to Emachines page. After you put in the make and model and stuff you should be able to view the user manual for your machine. If this isn't what you need you are able to contact support from this page and maybe they can direct you to a ... E-Machines eMachines Desktop PC

Problem with installing wireless card on a Emachines G520 with xp

By the device id your device is \015\012 \015\012DELL WIRELESS 1395 WLAN MINI-CARD for this go here\015\012 \015\012but emachi ... PC Laptops
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2336 seconds