Having problems with your E-Machines eMachines Desktop PC ?

Says no signal on monitor. - E-Machines eMachines Desktop PC

Answers :

The monitor is telling you that it is functioning properly (it works). It is also saying that it isn't receiving and signal from a computer. This can happen when-
** computer is turned off but monitor is on (this can occur, for example, when the computer's power supply dies while turned on). That happened to me just a couple of days ago.)

** monitor cable to computer has come loose or totally disconnected

The onboard video on these machines ****. get a spare video card from somewhere usually 5 or 10$ at a used pc store and pop it in see what happens.just check for what type yours would work with (ie. 1x,4x,8x -agp,agp pro pci,etc..)
Repair Help & Product Troubleshooting for E-Machines eMachines Desktop PC

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Says no signal on monitor. - E-Machines eMachines Desktop PC

The monitor is telling you that it is functioning properly (it works). It is also saying that it isn't receiving and signal from a computer. This can happen when-** computer is turned off but monitor is on (this can occur, for example, when the ... E-Machines eMachines Desktop PC

Beeping emachine desktop won't turn on

Hi shyguy, Before I address your issue, I figured you ought to know: Buying an emachine is one of the worst moves a consumer can make. Why? because despite the fact that they are cheap, they frequently have problems, which can ... E-Machines eMachines Desktop PC

LCD monitor signs "no signal" on eMachines t3418

E-machines had had a long history of bad power supplies. I've seen many of these machines go bad and when they do they take out the video chip (Nvidea) with it, usually shutting down the whole machine. I've never seen one operable. You might be ab ... E-Machines eMachines Monitor E15T4

Desktop Computer: No video output until it hits the desktop?

Hi,Well this is a first for me. All the post information and the splash screen is one of the first things you see on initial boot.The nVidia 8800GT is more than good enough for that machine unless it has a fault with it.What i ... Intel PC Desktops

EMachine T6522 monitor says "no signal input" when turned on. tower switch light on and motor seems to be running. Nothing but above message on monitor. Checked both ends of cable and unplugged tower and plugged back in.

This could be an issue of a video card gone bad. I have experienced the same issue firsthand. This could also mean that no RAM is installed. If you have been using this computer previously, the second option is probably not even an option.\0 ... eMachines PC Desktops

My emachines monitor has no picture, hard drive is functioning properly. Monitor is black

If you do not get a screen with a LCD monitor its likely you have a inverter problem or BACKLIGHT problem. you might need to replace the LCD backlight or replace the monitor on the desktop.\015\012check to see if the laptop can get a picture by ... PC Desktops

My computer is an Acer Aspire ASE-360-U-A3503 desktop computer and I still cannot get the power up button to shut off no matter how long i press on it. Then the monitor cable connector on the CPU is not giving out to the connector from the monitor. It keeps flashing cable not connected when the two aren't together, and when i plug them together, it says no signal. Could you please tell me what is wrong i can't take it anymore

You seem to have two problems here: The power button and the video connection.\015\012It should take 4 seconds of continuously holding the power button in for the PC to shut off, unless the settings under Power Saving say that doing this actio ... Acer Aspire E360 PC Desktop

Can't connect my emachine to 50" samsung plasmatv mod#pn50B530S2F

Try going to "display properties" and adjusting the settings there. Right click on the desktop wallpaper and go to properties, then click on the settings tab. Make sure the TV setting is turned on ... Acer Aspire L100 PC Desktop

Emachine beeps Hey, we just got a new emachine and we have the same problem! We got it mid/end of April but were in the process of moving so it stayed in the box till about a week ago. I hooked it up and when you press the on button it beeps 5 times then you hear the fan kick on like its thinking about starting up but then it just stops and beeps until you turn it off. The monitor says no signal and then goes blank. Any advise?

That would be a problem for e-machine. The beeps are codes. I will try to help, but it is hard to diagnose without looking at it.You can try several things. Open it up and make sure that everything is seated inside. Make sure the memo ... PC Desktops

My monitor says no signal

A friend gave me this computer because he got another and was tired of messing with this one ... he says he turned it off one night and it would never boot back up , sso i had a new 160 gig hd which is the same that was in it and i installed it think ... E-Machines eMachines Monitor E15T4

Power save mode

Yes, you arent getting a signal to your monitor from your video card. Try replacing. If its onboard then the Mainboard may be bad. These machines are known by Dell to go bad and is covered under warranty, provided you still have it. \015\012 ... Dell OptiPlex GX280 PC Desktop

E machine t2482

Try changeing the RAM and if that dosent work try the processor ... E-Machines eMachines Desktop PC

Old monitor not recognized by new computer, stuck in power save.

... Dell UltraSharp 1704FPT 17" Flat Panel LCD Monitor

Emachine T2672 will not recognize monitor

First, check to see if the computer is actually running--look for the lights on the front and listen for the fan (also, put your hand behind the machine to see if you feel air coming out). Once you determine that the computer is actually running, lo ... E-Machines eMachines Monitor E15T4

Aspire, desktop: Screen will randomly go blank, if I turn off monitor and turn back on it says no signal, keys are locked up as well. If there is audio when it does this the audio will start skipping just like a cd would. Tried multiple different monitors and still has same issue. I'm running a gforce 9400 gt. drivers are updated. Any assistance would be greatly apreciated. thnx.

Have you checked your gforce for power failure?\015\012check your powersource for the type. if it is not over 500 Watt.... That is a big problem with system function. If you are using a newer Updated machine, you should always keep up to electrical f ... PC Desktops

RBG error appears on screen (no signal) - E-Machines eMachines Desktop PC

The monitor is not getting any signal from the computer. Try a different monitor and / or cable. Could also be bad video card. ... E-Machines eMachines Desktop PC

I turn on the desktop and the monitor only says no input signal input2: HD15 go to power save what do i do?

Hi jiheeahn! I wiull be glad to assist you. lets isolate the issue. The reason why the monitor says no signal input2: hd15 got to power save. the connection from the monitor to the desktop computer is disconnected or its not connected to the right in ... Sony SDM-HS73P 17" LCD Monitor

Gateway LCD powers on but has no picture

I have a Gateway FPD1730 LCD monitor. When I plug it into my Gateway 500x desktop the power light turns green and then says "Power Saving Mode" and then it goes black. It will occasionally flash on and have a picture and then go off. When I unplug th ... Sceptre X9G Komodo IV 19" Flat Panel LCD Monitor

Emachine monitor problem

Ok so I have a emachine t4010 and the comps working and also the monitor says "monitor working check pc signal" its like they aren't meshing or something... ... E-Machines eMachines Desktop PC

Emachine destop not recognising acer lcd monitor

It sounds more like the computer isn't starting up. The "no signal" message is coming from the monitor itself to tell you it's on but there's nothing coming in to display. Normally no special drivers are required for the monitor, and you'd see at lea ... Microtek C593 15" Flat Panel LCD Monitor

I have a old emachine desktop and whenever i turn the monitor on it just says self test check your pc and signal cable monitor working. i have everything set up correctly and it still doesn't work.

Replace the little watch battery thats in it open the case and you will see it $2.35 at wal mart. mine was doing the same thing fixed it in about 15 min. open the case and you will see it ... PC Desktops

My monitor says power saves on and cut off - E-Machines eMachines Desktop PC

Your monitor not work properly plz check out by any tecnician. ... E-Machines eMachines Desktop PC

Emachine T6410 turns on but the screen says ''No Signal''

When you get the no signal ..this is just the cable that plug into the monitor...either on the video card ..or on the monitor side...but it is sure the cable ...whenever that signal is on ...this means that it do not detects any video signal came fro ... PC Desktops

Toshiba reply #2

There is no support for you're notebook. (I gather you know that by now). Did you ask Benimur as I suggested? \015\012Now that you have hooked it up to another monitor & you got the message (no signal & no display). I would say the inte ... PC Laptops

Dell 2407WFP Monitor losing signal and having colored line artifacts

... Dell UltraSharp 2407WFP 24" LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.7525 seconds