Having problems with your E-Machines eMachines Desktop PC ?

Desk top emachine powers on

\015 But no beeps, no power to mouse, or keyboard. Monitor turns on, but nothing on it.I have to turn computer off by unplugging it, the power button only turns it on. Does replacing the memory card help??\015

Answers :

Sounds like you may have a bad power supply or motherboard. Do you have another PC that you can hook the monitor up to? My guess is that the monitor is just fine.
You state that thre are no beeps coming from the PC upon boot. If you remove the memory entirely and reboot, you should get a series of BIOS post tones. If you do not get these, I would first test your power supply to make sure it is working properly. If it is, you most likely have a failed hardware component: either motherboard or processor. If you get no post tones without memory loaded and with a known good power supply, the motherboard will be your problem child.
\015\012
\015\012If you DO get post tones with a known good power supply, try replacing memory 1 stick at a time (if you have more than 1). If 1 works, you have your culprit. If neither work, then you most likely have a bad processor.
\015\012
\015\012Process of elimination...sucks sometimes :-(
Repair Help & Product Troubleshooting for E-Machines eMachines Desktop PC

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

HP Monitor comes on with bright white screen since changing PC


Try using a different wall outlet to plug in your monitor. Believe it or not this actually may help.\015\012What ever breakers you are talking about to get the monitor going doesn't really have anything to do with the drivers. Monitors are "plu ... HP Pavilion F1503 15" LCD Flat Panel Monitor

I have a T2958 and toof the face off. Can you


EMachines doesn't give out this kind of info, and I don't have one in the shop. eMachines also had the habit, of using a few different manufacturer's of motherboards. Intel, TriGem, MSI, Asus,and FIC to name five. Plus eMachines wou ... E-Machines (T2958) PC Desktop

Desk top emachine powers on


Sounds like you may have a bad power supply or motherboard. Do you have another PC that you can hook the monitor up to? My guess is that the monitor is just fine. ... E-Machines eMachines Desktop PC

EMachine ET1161-01 power up problem


I SUGGEST GOING TO MONITOR WEBSITE AND DOWNLOADING(UPDATING)MONITOR DRIVER(S).THERE IS ALSO THE POSSIBILITY OF INCOMPATABILITY WITH VISTE OS.RICHARDM69 ... E-Machines eMachines Desktop PC

I accedentally knocked the power wires off inside the big box i cant think of the name on my emachine w3507 how do i put back together


Power On switch, (Button), wires from the front panel that go to the motherboard? I could really use the name of the motherboard, to try to get you this information. I don't have an eMachines W3057 sitting in front of me, at the mom ... eMachines W3507 PC Desktop

I would like an internal view of eMachine T4150 to be sure everything is connected correctly


There's a bit of a toughie! eMachines doesn't like to give out this information, lyndapalimas, and I don't have one sitting in my shop.eMachines used four different motherboard manufacturers, to my knowledge. TriGem, Intel, FIC, and MSI. ... PC Desktops

RE: Emachine T5048 slow from Ducttapeuser


The one main cause of this type of problem is usually heat. You say that the fans are working, did you check to see if your power supply fan is working? Do you feel the temperature inside the PC to be warmed then luke warm?\015\012Also, McAfee ... E-Machines eMachines Desktop PC

Emachine t3092, no video, can't find certain desktop files


If they're not on the drive, they're not on the drive. Your only other option is to search the free disk space for the remainder of those files. For that you can use the free trial of ... E-Machines eMachines Desktop PC

BeNQ FP71E Monitor won't display desktop


The problem seems to be with the monitor.When there is no Display,if you power-off and on again do you get a Benq Startup screen?If not the problem should be dry solder on the Invertor board.Try tapping screen lightly,if it comes on the problem is dr ... BenQ FP71E 17" LCD Monitor

Emachine monitor Screen is flashing/blinking with desk top and later the screen saver very dimly on and off... checked all cables I had no power for a while left it on then the power returned and now i have the above issue


... E-Machines E17T 17" Flat Panel LCD Monitor

Had to replace power switch on emachine computer need to know where wires go


I'd like you to look at this motherboard, and compare it to yours. It's an Intel Seabreeze T3 motherboard. My data states it was used in many computers, and the eMachines T3830 being one of them. ... E-Machines eMachines T3830 PC Desktop

Pinout on t6410 gATEWAY CONNECTING POWER BUTTON


I don't see that this problem was solved. Adding additional information.The eMachines T6410 Desktop PC uses an MSI MS-7145 motherboard.(MicroStar International ), ... E-Machines eMachines Desktop PC

Need where pwr sw and pwr led and hdd led plug onto au31 motherboard


FIC AU31 mb (a.k.a K7m-NF18G mb)Pin Configuration = PinoutThe Front plastic panel of the computer is the Front Panel.The area of pins on the motherboard that the cables (Wires) go to, is the Front Panel header.Front Panel head ... E-Machines T3092 PC Desktop

Dell dimension 3000 desk top, does not turn on ?


It's one of two problems: bad power supply, or bad motherboard. If you are electro-mech inclined, remove the power supply. Take it to your local computer repair shop, and ask for one just like that one.Reinstall, power up should (most of the ... Dell Dimension 3000® Pentium® 4 2.8GHz, 256MB, 80GB, 48x CD-RW PC Desktop

My e-Machine W3115 automatically shuts down multiple times


1) Computer off, and unplugged from power. (Unplug from the surge protector FIRST, then unplug the power cable out of the power supply)2) Work on a table where you have plenty of room.Open the computer case. (Rear of computer, ... eMachines W3115 PC Desktop

How to install memory for T3642 eMachine - E-Machines eMachines T3830 PC Desktop


EMachines T3642 Computer takes the PC2-5300 DDR2 SDRAM DIMMs. Supports Dual Channel DDR2. Memory Type, and comes installed with 1.0 GB = 512 MB (removable) + 512 MB (removable) of Memory. You can upgrade your eMachines eMachines T3642 Computer to up ... E-Machines eMachines T3830 PC Desktop

Cpu upgrade , please help


Tech-gu818, When looking to see what processors a computer will support, try to find out what motherboard chipset is on the motherboard, and the processor socket.The motherboard chipset is the;1) Northbridge chip2) ... E-Machines eMachines Desktop PC

Dell dimension e310 desk top will not power on


If the POWER Button on the TOWER is blinking AMBER (Yellow) then the most likely failure point is the POWER SUPPLY in the Tower.\015\012\015\012 ... Dell Dimension E310 PC Desktop

Wires from switch came unplugged (white and black) where do they


Power On switch (Button)? Restart switch? Speakers?Wires came loose from the motherboard?Should like you to see if you can trace the wires back to the front panel, (Where the Power On button is located Granted, this may be a little tough ... E-Machines eMachines Desktop PC

My ibm desk top is stuck in power save mode monitor won't work


So the only way you have to act is, turned off and directly on the mainboard, so do it carefully.\015\012You'll have to find out, where, on the mainboard is located the battery, (a small coin like\015\012unpluggable metallic piece) ... PC Desktops

E-Machine T2862 Will Not Power UP


Regarding the power + power LED +HDD LED connections, if you haven't tossed the unit yet -- looking straight down with the box laying on side (e.g. CPU fan blades pointed straight at you) -- GreenWhite + BlackWhite (start with left pin, row nearest t ... E-Machines T2682 (000002965) PC Desktop

Desk top won't display-hibernation mode


Hi,\015\012\015\012Based on your post of failure to boot due to hibernation, you can try\015\012removing the battery and AC adapter connection for an hour or so.\015\012Thereafter, insert battery back and charge but don't power up. Allow\ ... HP Pavilion dv4000 Notebook

Xp wont turned on it will not boot to the desk top it frezers


This should fix your problem. Even w/o your installation disk. I have used this program to fix Pc's I have picked up off the side of the road. I would hit the power button, it would show the BIOS then it would stop and shutdown. This fixed 99% of ... Gateway MX6030 Notebook

I have an emachine lap top I got back in 2005. Everything was working when the other day my computer just shut off. I checked the power cord and there was a tiny hole, but appeared to have power going through as there were sparks. I tried electrical tape for the hole just to see if that was the problem before I go buy another cord, but still the lap top does't turn on. Could it be a more serious problem?


EMachine Towers have a history of the power supplies blowing the chipset on the motherboard. This may be a similar problem check the mobo chipset if there appears to be a small hole or burn mark the mobo will be u/s as you can't change the chipset. ... eMachines E620-5885 Notebook

Monitor will not com one when desk top is turned on


Power management might be the problem sounds like you need to just get in to the power management program and turn it off ... E-Machines T2893 PC Desktop
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4626 seconds