Having problems with your E-Machines eMachines Desktop PC ?

I have similar problem on an eMachines W1500

\015 When I power my pc on, the green light around the power button lights up, I can hear the computer running, but my screen is black. I checked my screen with another computer and it's working fine, I did notice that the yellow light that has a battery symbol above it on my pc is not lighting up, could this be my problem and how do I fix this? also, when I opened my pc up I noticed there's a red, black & white wire that has a 4 pin connector on the end of it is unplugged from somewheres and I don't know where it should be plugged in at. Any advise????\015

Answers :

Thats your powersupply cable. look for a 4pin sloth on your mobo that looks kind of like that switch and plug it in
Repair Help & Product Troubleshooting for E-Machines eMachines Desktop PC

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have similar problem on an eMachines W1500

Thats your powersupply cable. look for a 4pin sloth on your mobo that looks kind of like that switch and plug it in ... E-Machines eMachines Desktop PC

My emachine freezes after it boots up. I had

I must say at the front that you seem to have the machine looked at professionally and received advice. They couldn't fix it ... I'm not sure I can build on that diagonosis. I do have a few ideas, however. This is a case where the messenger is tel ... E-Machines eMachines Desktop PC

I have an emachine lap top I got back in 2005. Everything was working when the other day my computer just shut off. I checked the power cord and there was a tiny hole, but appeared to have power going through as there were sparks. I tried electrical tape for the hole just to see if that was the problem before I go buy another cord, but still the lap top does't turn on. Could it be a more serious problem?

EMachine Towers have a history of the power supplies blowing the chipset on the motherboard. This may be a similar problem check the mobo chipset if there appears to be a small hole or burn mark the mobo will be u/s as you can't change the chipset. ... eMachines E620-5885 Notebook

My eMachines T3882 with Windows XP just reboots over and over

If it will start in safe mode, try running your anti virus to find a virus.If it wont start in safe mode, try making bootable USB with a standalone virus checker.Seehttp://support.kaspersky.com/faq/?qid=208282173Kaspersky make ... E-Machines eMachines Desktop PC

Emachines W3052 Gets stuck on logo screen when starting up.

My computer does a similar thing, the issue with mine is the mother board which requires everything to be at a certain temperature. Let it run on the start screen for a couple minutes and hit the reset button. If it doesn't boot up you're going to ha ... E-Machines W3052 PC Desktop

I have a Emachine W3650 And it wont start up

Insert your windows cd and set computer to start from cd. When prompted to, hit a key to boot from CD. Let Windows start the install (relax it is not really installing anything) when it gets to the prompt, tell it you want to Repair an existing ... E-Machines eMachines Desktop PC

My Emachines Desktop W5243 works sometimes and others just beeps

You might be having a minor dust particle situation going on. Take the memory out of the system. Get a can of air and blow out the slots on the motherboard where the memory would normally go. Then take the can of air and blow the connectors on bot ... E-Machines eMachines Desktop PC

2 year old E machine

Dear zmatt,\015\012\015\012Looks like the power outlet or UPS may be at fault. Try a different outlet. That's all I can thik of.\015\012\015\012Good luck! ... E-Machines eMachines Desktop PC

Emachines t6528 keeps shutting off on its own. I have been getting more error messages lately. Now it just shuts off whenever. The power button flashes on and off. The only way to get it back on is to unplug it and reboot it.

The flashing power button indicates that the machine has gone into sleep mode. Moving the mouse or hitting a key on the keyboard should wake it up. But if it doesn't...\015\012\015\012Go to Control Panel -> Power Options and change t ... E-Machines eMachines Desktop PC

Cannot recover my emachine t3104

E-machine company is not going to help you they will give you the number for gateway but they don't help unless you pay 59.97. I have a similar problem, My sister accidentally deleted my sound card ... PC Desktops

T2085 will not turn on

It is fairly easy to replace the power supply, a few screws to remove the power supply then it is just a matter of unplugging all the power connections from the old one, swapping out the supplies and matching the power connections up with the s ... E-Machines eMachines Desktop PC

Compac Evo D300v and Emachine W3650-usb do not detect devices

\015\012One or more of the hints below will probably sort out most USB problems with most USB portable / external hard drives and OTHER devices (though not always)A few things to check but assumes USB and Windows for other interface ... PC Desktops

I can't get my pc to boot up.

I had a similar problem; although, I do not remember the exact file name (it was however *.dll). I ended up re-instaling operating system. If you can get into safe mode you could save your personal files before reinstall. ... E-Machines eMachines T3830 PC Desktop

Emachines model 780 monitor comes on for one second then goes blank

I have a Similar issue with an emachines monitor..after trying a few things such as trying it on a different computer...changing cables and changing power cords..also turned the brightness up all the way...you can faintly see the windows screen on th ... E-Machines eMachines Desktop PC

DVD drive Emachine T5022

If the Drive has completely failed reading both formats of discs, then there is usually no hope other than replacing the drive. They a fairly cheap now even for a 20x DVD burner. To find a great deal on one look at www.newegg.com They are relativel ... PC Desktops


I've had problems extremely similar to what you're going through. Besr Bet, Hands down is to get in there and make a brand new disk out of the one you want to put files on. Is this a SATA or SATA II disk? If it's UDMA, no problem, just make sure you ... PC Desktops

Cant connect pc to tv monitor

You didnt say whaat your graphics card was but if you are using the ONBOARD you might have a couple of problems.\015\012\015\012It might also be useful to know what type of connection you are making. ... E-Machines eMachines T3830 PC Desktop

Emachine T2742 wouldnt start, new powersuplly installed green board light on but still no response. switched out ramstick,stiil nothing. switched out main processer still no.hard drive OEM is ok what else????????????? ive heard of similar probs this model,whts up????

First Pull cmos cell from motherbord for 10 minutes because sometimes low voltage of cmos cell creates this problem .After remove cmos cell from motherbord for sometime your bios settings goes to defaults.Then check.Also check that ... E-Machines eMachines Desktop PC

I have a emachine T3640 and the last thing I did was a Windows update and the computer kept wanting to restart so the new update will take. Now that it has restarted I get an error message that says Windows failed to start. A recent hardware or sorfware change might be this cause. To fix the problem: 1. Insert your windows installasion disc and resrart you compurter. 2. Choose your language settings, and then click "Next" 3. Click "Repair your computer." I have tried step one never re

HiThe disc probably works, what the issue is, is that the computer is not set to start up from a cd, we can change this in the bios. Have a look at this page, ... E-Machines eMachines Desktop PC

E-machine will not power up even after replacing the power supply

If the new power supply has a 115/230 switch, make sure it is set correctly. Try the power cord in another outlet. If the fans run, watch for the NUM LOCK, CAPS LOCK, AND SCROLL LOCK LED's on the keyboard to flash once when power is applied. If you s ... E-Machines eMachines Desktop PC

Computer won't come on

Does this computer have on board video? You mention that you added a new video card. Did you remove an old video card?\015\012\015\012Do you see anything at all on the monitor at anytime while booting?\015\012\015\012If it h ... E-Machines eMachines Desktop PC

Monitor on a emachine 250 computer comes on picture is very light faded in the background but no light

This is a typical symptom of a failing LCD screen inverter board or LCD screen backlight lamp. The backlight lamp failure symptoms are very similar to the inverter board failure symptoms. If you have to guess which one is causing the problem, try rep ... Acer Computer Monitors

Hi my name is Ed, I turn on the system but all I get is the Emachine logo and does not go to windows. Help?

Hello Ed, Your problem is similar to asking an auto mechanic over the internet....My car won't start...why not?You need a computer tech, find one local and make sure he guarantees his work for at least 90 days. ... E-Machines T2615 PC Desktop

Weird blink problem...

That's definitely a hardware (incompatiblity) problem. Download the most updated driver for the graphics card. Also see if there is a monitor driver for the monitor.I understand it worked seamlessly for the emachine but you should switch ... E-Machines eMachines Monitor E15T4

EMachine T3025/Best Buy

Get simple windows xp you just have to format deep with emachines as ntfs ive ran windows complete programs on emachines with out a problem and created straight recovery disk simple to be ran in windows safemode\015\012now your hard drive ... PC Desktops
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.6220 seconds