Having problems with your E-Machines eMachines Desktop PC ?

Tower has no power not even the fan - E-Machines eMachines Desktop PC

Answers :

Be sure all power outlets are turned on, and the power cable is inserted properly into the computer.
Repair Help & Product Troubleshooting for E-Machines eMachines Desktop PC

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My e-Machine W3115 automatically shuts down multiple times

1) Computer off, and unplugged from power. (Unplug from the surge protector FIRST, then unplug the power cable out of the power supply)2) Work on a table where you have plenty of room.Open the computer case. (Rear of computer, ... eMachines W3115 PC Desktop

Tower has no power not even the fan - E-Machines eMachines Desktop PC

Be sure all power outlets are turned on, and the power cable is inserted properly into the computer. ... E-Machines eMachines Desktop PC

Noisy machine My desktop is an emachine 5260. For the last 6 months the machine has been getting noisier, presumably it is the fan. I have tried reformatting but no change. I dont think that i have too many programmes , but even so i am reluctant to remove any. Any help would be wellcome

You are probably right the fan or the power supply. Most likely the CPU fan. Emachines have always had problems with noisey fans. The fan noise has nothing to do with the software on the computer. Deleting software doesn't help\015\012the problem. I' ... E-Machines eMachines Desktop PC

My emachine T1742 desktop will not turn on. When plugged in the power supply's fan turns on, cpu fan doesnt start, both hdd/power led's flicker and pressing power button doesnt power on/off system.

Disconnect all the devices from the computer(tower) including keyboard, mouse, monitor(everything)..even the power cable\015\012\015\012Now keep on holding down the power button on the computer tower for 15-30 seconds..\015\012 ... E-Machines eMachines Desktop PC

Emachine desktop The computer worked fine one day and the next day when we went to turn it on it would not power up. The monitor comes on and on the monitor screen it said monitor working fine check hard drive. Well I can't check anything because the tower has no power. The light around the button doesn't come on and you can't hear any kind of fan starting. Called emachines and the only thing they could tell me was to change outlets, did that, turn power off (no power) leave unplugged for 3 minu

I understand that your cpu is not turning on and the repairer confirmed that it is the issue with the mother board. I suggest you to please check the smps fan spinning or not. If its spinning then then the issue could be with the mother board. If not ... E-Machines eMachines Desktop PC

Sony vaio desktop

Pricewatch.com is a place to go to get fan prices and suppliers but a local PC shop usually has a pile of old used fans...fans seldom go out....but....You need to check the power supply for the fan size and even, if a newer model power su ... HP Compaq Business d530 Ultra-Slim PC Desktop

Desktop Lockup Hello. I have an emachines model T2042 desktop and it has started to lock up and the activity light below the power button blinks at a steady interval, and I can hear a rhythmic "knocking" inside the machine. I have to unplug the power cord from the rear of the machine to get it to power cycle, and then turn it on again. It's a Celeron, 2GHZ machine, with 128MB of original memory. Could this be a power supply issue? I know it's an old machine, but was planning on giving to my sist

Remove the cover to look at the power supply fan while it is powered on ( if needed). The fan should be spinning at a steady rate. If you observe fluctuations in the rotation, these are early indications of a malfunctioning power supply unit. As for ... E-Machines T2042 CELERON 2 GHz 128 MB 40 GB HDD Dsktop Computer System PC Desktop

Dell Precision 670 Workstation REALLY LOUD and NOISY

It could be due to a failture of either the SMPS fan (Power Supply), the system cooling fan or the Videocard fan... Now checking the power Supply fan issue is easy... Take a toothpick {wooden} n insert it between the fan fins at the back of your towe ... Dell Precision Workstation 670 PC Desktop

E-Machine T2862 Will Not Power UP

Regarding the power + power LED +HDD LED connections, if you haven't tossed the unit yet -- looking straight down with the box laying on side (e.g. CPU fan blades pointed straight at you) -- GreenWhite + BlackWhite (start with left pin, row nearest t ... E-Machines T2682 (000002965) PC Desktop

Computer dies on me (can't say it better due to no technical knowledge; pls read :-)

The 'click' sound you hear when your computer goes off is the hard drive head parking itself.  It does this whenever the machine shuts down to prevent damage.As for the problem itself, I believe your computer is overheating.  Th ... Acer TravelMate 290LCi Notebook

EMachine 2862 Desktop Dead On Power-Up

Check all the leads to the hard drive and check that the fan starts spinning when you switch it on if it dont start then the problem is the switch these do often go and can be easily replaced and they are not expensive i had the same problem and foun ... E-Machines T2682 (000002965) PC Desktop

2 ghz processor running at 220 mhz

Hi, Have you tried right clicking on the desktop (opening Display Properties), clicking on Screen Saver tab, Clicking the Power button, and setting the power schemes to Home/Office Desk? If its set on laptop it will reduce the processor s ... Dell Inspiron 9300 PC Notebook

Hello, I have a Gateway model GT5662, stock setup - Will not boot

Usually, if it's a motherboard that has a failed component on it, you will see failed Electrolytic Capacitors. The small aluminum 'Cans' on the motherboard.Note*The Electrolytic Capacitors that surround the Processor, should have sp ... Gateway GT5662 Desktop PC

E-machine desktop powers up and shuts right down

Yes absolutely it is the power supply and EMachines have a reputation of using less than great power supplies. Do not turn it back on as it may cause damage to motherboard components. Now as for as getting a new one they are not expensive. FIrst you ... E-Machines eMachines Desktop PC

My emachines EL 1200 desktop stopped working during bad storm

You can try to reset the computer by removing all power sources and letting it sit for a time. Then powering it back up and see what happens. That's called a hard reset. \015\012I am guessing that the storm surge damaged your motherbo ... PC Desktops

EMachine will not turn on.

Sounds like the power supply is faulty. Power supplies are very dangerous to try and repair, even for qualified technicians. I would also suggest not trying to plug it in or turn it on until the new power supply is in place. Faulty power supplies ... E-Machines eMachines Desktop PC

Emachine tower won't turn on

Smps it is on cpu. where u connect power supplty cable it is 1 square box.it is on top[ of cpu back side. ... E-Machines eMachines Desktop PC

Gateway GT5240E desktop won't power up

More like the video card. I now have the same problem after 5 years. I noticed that when I played games the computer would freeze up. Then it got to the point where it would not start. I replaced the power supply thinking it was the problem but agian ... Gateway FX4710-UB003A Core 2 Quad Q9300 6GB DDR2 640GB NVIDIA GeForce 9800 GT Windows Vista... PC Desktop

EMachine Model T3828 No power

Greetings! As the first answer suggests, you must be comfortable taking things apart. I've actually just finished diagnosing the same problem on a customer's computer, and Here's what I did.First, I remove the power plug, open up the co ... E-Machines eMachines T3830 PC Desktop

E-machine will not power up even after replacing the power supply

If the new power supply has a 115/230 switch, make sure it is set correctly. Try the power cord in another outlet. If the fans run, watch for the NUM LOCK, CAPS LOCK, AND SCROLL LOCK LED's on the keyboard to flash once when power is applied. If you s ... E-Machines eMachines Desktop PC

Emachine 3240 possible power problem?

I would suggest try to swap the power supply out with another known good power supply.I've seen where even though the light on the motherboard is lit, it is not getting enough power to start the machine up, especially if you have a higher ... E-Machines eMachines Desktop PC

My emachine desktop is not not coming on

I've owned nothing but e-machines towers for probably 9yrs. I've had this exact problem with two of them already. E-machines are notoriously known for power supply problems (which is usually about a $50 fix), but oddly enough the two problems I've ... E-Machines eMachines Desktop PC

Emachine t5026 on and right off

Hi maybe you could try these steps I'm always doing when I experience the same problem as yours. This is only according to my experience fixing desktop computers.1. Try to disconnect all the connection at the back of your computer tower t ... PC Desktops

E-Machines 2862 Dead On Power-Up

You might want to try to unplug it at the power cord and then plug it back in again, ... E-Machines T2682 (000002965) PC Desktop

E-machines desktop PC will not power up at all

1) Check and see if the switch on the power supply is turned on (if there is one).If it still won't turn on then most likely the power supply is dead. It's not very expensive to replace.The other explanation might be that the powe ... E-Machines T2240 PC Desktop
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.7629 seconds