Having problems with your E-Machines eMachines Desktop PC ?
PC Standby Mode Problem
\015 The system goes into standby mode fine but when i come to taking it out of standby mode why does it not instanly load windows like normal? instead it boots up the whole system like you would expect it to when shutting down the pc fully, why is this?\015
Turn stand by off.
Repair Help & Product Troubleshooting for E-Machines eMachines Desktop PC
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Standby mode is not working..
Check Control Panel -> Power Options -> HibernateThe "Enable hibernation" will be greyed out and you cannot turn it on if you do not have free disk space greater than the"Disk space required to hibernate". You will need to fr ... PC Laptops
Standby mode is not working..
Hi and welcome to FixYa, Appreciate the direct "Ask Me".Initially, would suggest going into the CMOS/BIOS setup and restoring all configurations/settings back to default. Should this be not corrective, try verifying settings ... Acer Aspire 5000 Notebook
Compaq F572US won't start (led turns on, but nothing happens)
I have been having the same problem. At first I thought that the motherboard was fried and the laptop was a paper weight, but I kept it plugged in and kept pressing the power button several times over the days. It would always seem to start (screen r ... Compaq Presario F572US Notebook PC
System is going into standby mode while working
... ASUS Eee PC 901 20G Notebook
The Monitor not works after the Standby Mode or Switch off
If you have not tried yet, pick a can of freeze-it, or other. Gain access, safely power up and when the monitor goes into standby, hit the area and cool down the IC's. If they are overheating, this has a good chance of bringing them back and identify ... IBM P 260 (Black) 21 in.CRT Conventional Monitor
Shutdown My son was given one of these computers after the place where they were used they no longer need them, the only problem is they shut down after opening up XP. You can just about get into Paint and then the whole thing closes down. It shuts down my monitor to standby mode and makes the screen go blue. We have clean them and replaced the heatsink paste.
Try booting in safe mode (press F8 right at the end of the bios boot screen and select safe mode). If the problem still persists while running in safe mode then you probably have a hardware problem. In this case power down and re-check all of your ... HP Compaq d530 SFF PC Desktop
Gateway 400SD4 Power Problem
Faulty Battery.\015\012Get a new one.\015\012\015\012\015\012If that is not the problem check the ram. ... Gateway 400SD4 Notebook
Dell Inspiron E1505 laptop shuts down from "Standby" mode
This is a common problem with e1505. Basically, the machine will shut down, unexpectedly in a number of ways. Some suspect bad cord or power connection, others believe bad mother board or RAM, but nobody seems to know for sure as they have never be ... Dell Inspiron E1505 Notebook
Standby Mode My standby mode no longer works. The PC goes into standby for a few seconds but then kicks back on. I've searched for a virus (on NOD32 and Skybot 1.4)but they indicate it is not a virus problem. Standby had worked fine for a year, but just recently stoped. Any suggestions?
Hey this looks like an issue with Windows OS. you need to repair windows. I was facing the same problem. I got this issue fixed for free from this new online support guys called ***. ... Dell Dimension 4700C PC Desktop
Wont boot up to bios
I have had TWO recent model NEC laptops with the same symptom in the past 5 months. I was quite surprised, since NEC is a quality product. But the problem was the DVD/CD-Rom, which is made by Philips (mine were Philips SCB5265 models, but there are o ... NEC Versa SX Notebook
Monitor picture fades out.
I thought my problem was originally monitor related. However since I posted, the picture disappeared altogether, and my PC wouldn't even start to bootup. Fearing my mobo may have died I removed the hardware components, cleaned then re-assembled them. ... NEC Mitsubishi Diamond Pro 920 19" CRT Monitor
When the PC starts the monitor does not come out of the power standby mode
Hi The problem is to do with a 680uf capacitor that tends to bulge and fails.this stops the monitor staying on when trigerd to do so,change this and happy day. ... LG Flatron L1715S 17" LCD Monitor
Monitor problem.... i've compaq monitor...the problem is the monitor has the OSD display but when i connect the vga cable to desktop the display blank after a few second...voltage for b+ also decreasing from 128v to 48v...all capasitor checked already and in the good condition...the resistor and diode also checked.so could you please help me... i've already try to repair this monitor for about 1 week...please....
Please provide some more information ( like when u plug in /on your monitor is it showing some raster or u feel the crt is charging or not?) any way after reading the information u provided it seems that your monitor is remaining in standby mode , po ... Compaq FS 7550 17" CRT Monitor
May you help me
Check the led lights when u come wen u try getting the computer back from standby mode ... Dell Latitude D600 Notebook
Dell Optiplex GX270 lockup and s3 standby lockup
Have you tried changing your boot sequence (setting your hd as first boot source?) in set-up?just asking- if you still have cd as first boot device, it should go to second choice (hd?), with no problem, but you might try re-setting to manufactu ... Dell OptiPlex GX270 PC Desktop
Monitor hibernation problem
My lap top will not power up The charging light is on but when I try to start it nothing happens? ... BenQ FP567s 15" LCD Monitor
Power dies when video signal applied
I fixed this problem by replacing all the electrolytics 1000uF and 1500uF on the power supply/inverter board. All were either bulging or had burst at the bottom rubber seal. This cleared up all problems and I am using this monitor successfully at t ... ViewSonic VE710b 17" Flat Panel LCD Monitor
I turned on my computer the power light keep blinking and my computer will not come on
Your computer is in STANDBY mode..To bring it back....There will be a SLEEP/ STANDBY button on your keyboard...press it..This should solve your problem... ELSE....There is problem with your ... Dell Dimension 4700 PC Desktop
Samsung 216bw Stuck in standby mode
Do you still have the problem and the monitor? Would you be willing to buy the parts from me for say $75? Or would you be willing to sell yours to me for the same price? I got one that someone dropped and the screen is bad. I either need a good s ... Samsung SyncMaster 216BW Monitor
Acer pc standby mode
I think your pc thinks it is connected to an external monitor. press Fn and F5 at the same. If this is the problem it will fix it. You may have to try several times.ThanksCbz123 ... Acer Aspire 3000 Notebook
Standby mode problem
... HP Compaq Presario C500t Notebook
PC Shuts Off with No Warning!
Hyperthreading is not active in a dual core system. It is a software phantom core that is used for single core processors that support hyperthreading, eg Pentium IV 3ghz and above.\015\012\015\012I think your problem lies in the power set ... PC Desktops
Monitor won't turn on -- flashes on then off again
This is probably a RAM memory trouble, you have to try with 2 ways: 1) Try with another RAM memory to start your pc, 2) Verify the memory using a DOS software to check it.Also, you could reset the BIOS using the jumper settings establishe ... Sceptre DCL 7A 17" Flat Panel LCD Monitor
System is going into standby mode while working
Check it on the bios the power settings or if its still under warranty its better to take it to service centre ... ASUS Eee PC 900 16G Notebook
Sylvania L181 stays white in standby
My sylvania TV stays on stand by mode only ... Sylvania L181 18.1" Flat Panel LCD Monitor