Having problems with your E-Machines eMachines Desktop PC ?

Power on emachine T6420 and moniter is blank. The moniter soon loses contact with the computer. The fan run and power is OK there is no beep code.


Answers :

If you mean after the computer performs the self test the screen goes blank and stays blank, eventually turning off you are having a hard drive problem. When the computer boots you should see an E-Machines logo and/or a self test on the screen. That is done by the motherboard as part of every boot up. After that the motherboard passes control to your boot device and loads your operating system. If your computer stops booting at that point, your boot device is not working properly. That could be caused by many things - virus, hardware failure, power outage.\015\012\015\012If you really mean you see nothing at all on the screen when you press the power button your computer simply is not working at all. Open the case, blow all the dust out of it and reseat all components you can, then try again.
Repair Help & Product Troubleshooting for E-Machines eMachines Desktop PC

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Power on emachine T6420 and moniter is blank. The moniter soon loses contact with the computer. The fan run and power is OK there is no beep code.


If you mean after the computer performs the self test the screen goes blank and stays blank, eventually turning off you are having a hard drive problem. When the computer boots you should see an E-Machines logo and/or a self test on the screen. Tha ... E-Machines eMachines Desktop PC

My gateway g7-500 fails to start properly. Whemn power on I get a long beep followed by 2 short ones and the monitor screen remains black.


Cause:This issue can be caused by any of the below situations.\015\012 \015\012\015\012New hardware conflicting with old hardware.\015\012Bad or failing hardware device.\015\012 ... PC Desktops

Emachine Will not boot


Different beeping patterns are codes which indicate what part of the hardware has failed (ram, video card, cpu, ect). the fan failure would not cause beeps, and would not cause the cpu to fail unless already in windows. if you could find out the man ... E-Machines eMachines Desktop PC

Does not power up


It's a dreadful way to start a day - you press the power button on your computer and nothing happens. Do not fear because all may not be lost! Follow these simple steps to determine why your computer won't turn on. Note: It is very import ... IBM ThinkPad T22 2647 Notebook

SPoradic faults when booting


This problem isn't easy to diagnose, but there are some things you can try to narrow down the problem. Do this at your own risk, but go into the bios settings and check your processor temperature. Take note that if there's a a feature to enable pro ... PC Desktops

Monitor not coming on - Packard Bell Easynote R4650


It's a dreadful way to start a day - you press the power button on your computer and nothing happens. Do not fear because all may not be lost! Follow these simple steps to determine why your computer won't turn on. Note: It is very import ... HP Pavilion a305w (DM181AR) PC Desktop

My d530 minitower powers off unexpectedly and red lights starts to blink on System's LED//


Hi Kindly let me know how many times the red light blinks \015\012\015\012\015\012\015\012Condition\015\012\015\012Code\015\012\015\012Service Actions\015\012\015\012\015\012\015\012\015\012\015\012Process ... HP Compaq d530 Convertible Minitower PC Desktop

My 110v PC was plugged in 220v


There is no such thing as plugging something into 220v. That is the voltage at which your power supply will provide power to your computer. What you did was give your computer more power than it needed and you most likely burned out the mother boar ... E-Machines eMachines Desktop PC

Computer starts but does not post Athlon XP KM4M DDR


What kind of beep code does it give... \015\012most MSI motherboards have ami bios.\015\012check you beep codes here:\015\012http://www.computerhope.com/ ... PC Desktops

MSI NVIDIA MCP73PV Motherboard will not boot into bios, no video signal. I have remove the memory, data cables, video card, battery (which i shorted - to + without power to reset the motherboard still didnt help) and powered up computer and no beeps telling me there is no memory or at least error code beeps. I would assume that it is a mother board issue or process which i would replace both anyway. BTW power supply fan runs processor fan runs external fan runs and the HD is spinning up so I a


You fried your motherboard, buy a new one or a new computer, it's up to you. ... Gateway GT5678 Desktop PC

CPU fan runs at high speed and won't boot


Check the power supply for problems. \015\012\015\012My computer wouldn't run thru the post up, no beep codes, only the fan running on high. The power switch didn't shut the computer down, it needed to be turned off at the power supply, o ... Dell OptiPlex GX520 PC Desktop

Pc starts and runs but wont boot up monitor shows no signal


1) When you turn on the computer, watch and listen for: a) power supply fan, (power is on) b) chassis lights (power is on) c) ticking sound during memory test (the BIOS POST is running) d ... HP PC Desktops

My pc beeped twice and nothing came


Lack of video signal is usually 1 of 3 things, Power supply (PSU), Video card or Motherboard (mobo).Situation #1: If you get a blank screen and no sounds or movement it either indicates that the power supply unit (PSU) has failed or somet ... Dell Dimension 2400 PC Desktop

I recently moved my computer into my new condo and have not been able to use it since. The problem seems to be with the monitor. I turn on the computer and the fan comes on but the monitor displays "no signal" and then goes dark but the light one the front still flashes indicating it is getting power. The last time I moved my computer from one room to another, the monitor suddenly couldn't/wouldn't display colors accruately - no red. Attempt to adjust the color by using the monitor's controls we


Lack of video signal is usually 1 of 3 things, Power supply (PSU), Video card or Motherboard (mobo).Situation #1: If you get a blank screen and no sounds or movement it either indicates that the power supply unit (PSU) has failed or somet ... E-Machines eMachines Desktop PC

NO VIDEO OUTPUT


When you changed the power supply did you also plug in the 4 pin video power plug ( if your mobo has one)?Take ALL the components out of the computer except the PS cpu and cpu fan. Clear your CMOS and turn on the machine to see if the ... PC Desktops

I'm having touble with a compaq presario s4020wm. I see one light comming on but the other one never does . The power pack light is green and the fan is running also the fan on top of the prcessor is running but, the computer never comes on. Also the computer monitor never displays it goes to starting up as a green light then goes to a yellow color which mean there's never no screen on it. Could this be the motherboard has gone bad ? I even tried to hold the power button in for about 30 seconds


\015\012Disconnect all devices from the power supply EXCEPT the motherboardRemove any extra cards including video etc.(plug monitor into the onboard)If you hear any beeps these can indictate where the fault is.either of ... Compaq Presario s4020wm (DK214AR#ABA) PC Desktop

My sons compaq presario cq50 wont run


Hi, \015\012\015\012I could well be wrong, but my gut feeling is that your laptop is having memory issues. Start by accessing the memory and (carefully) removing it from its seating. Give it a quick check for dirt / dust etc and then re-s ... PC Laptops

T1150 emachine Computer not booting up correctly


Did you hear any beeps from the bios? Try to remove all the peripherals like all the PCI cards, specially the "video card", your ram's,. Once you removed and cleaned all of those, put it back,make sure that theres no loose connections and boot the co ... E-Machines T1150 PC Desktop

Computer suddeny refused to turn on/boot whatsoever


It sounds like the hardrive you installed overloaded the system and cause a low power operation on the computer the motherboard may be bad because of this as well as anyparts that were connected to it i have had this happen to me before and well i kn ... Dell Dimension 8400 PC Desktop

When I turn it on, only the fans run. I cannot hear the hard drive run and the hard drive light on the bezel is solid yellow


EMachines were designed to be Budget computers. As such the company used cheap Power Supply's. Cheap components within the power supply have failed. The power supply only has enough power to light, lights, and spin fans.Solution is to rep ... E-Machines T6216 (827103077834) PC Desktop

Inspiron 1100 wont boot up,screen stays black,i can hear the fan running,sounds like hd is starting


STEP: Run the Preboot System Assessment (PSA)\015\012\015\012\015\012\015\012Additional Information\015\012\015\012\015\012\015\012\015\012Ensure that the computer is powered off. ... Dell Inspiron 1100 Notebook

No video signal to Monitor.


Lack of video signal is usually 1 of 3 things, Power supply (PSU), Video card or Motherboard (mobo).Situation #1: If you get a blank screen and no sounds or movement it either indicates that the power supply unit (PSU) has failed or something o ... E-Machines eMachines Desktop PC

IBM ThinkCentre 8183 (M51) does not boot


The situation you describe is usually 1 of 2 things, Power supply (PSU) or Motherboard (mobo).Situation #1: If you get a blank screen and no sounds or movement it either indicates that the power supply unit (PSU) has failed or something o ... IBM ThinkCentre M51 PC Desktop

BOOTING PROBLEM My laptop is compaq presario v3029 AU.My laptop faced booting problem twice within the warranty period and the motherboard was replaced.Now its happened for the third time and replacing motherboard,would cost me half the price I had purchased my laptop for.I feel the problem am facing is repairable instead of replacing.The compaq service technicians have not given me any convincing reason for the problem occurring twice and they just repalced.However I feel it could be repaired.


1. Look at the power supply to determine if the fan is working.If not replace the motherboard to see if the computer starts.If the fan is working, try another power supply anyway.2. Shake the case and listen for loose metallic objects that may ... HP Compaq Presario V2000 Notebook

Monitor reads: PC entering power saving mode then shuts off;PC on


First do not take the hard drive out and put it in another computer. It is configured to run in the computer it's in.\015\012\015\012Next, you probably did have a power surge either from your power supply or the power in your home. It s ... HP Pavilion a810n (PP164AA) PC Desktop
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 1.0942 seconds