Having problems with your E-Machines eMachines Desktop PC ?

EMachine Desktop Computer

\015 Emachine will not boot. When I turn it on there is a constant beep. All the fans are working and it sounds like it is going to boot, but no signal to the monitor!!\015

Answers :

This is most likely an issue with the powersupply being faulty, contact Emachines and tell them the error(as well as model and all that). They will then most likely send you a power supply that you can easily install yourself. Its just four screws in the pack and then just pluggin in a bunch of connectors inside of the computer. 
Hi there.
Remove the power cord from the back of the computer, take the side panel off the computer so you can see the motherboard, take out the system memory, looks like this >>>>
6871989.jpg
get a clean, dry soft paintbrush and clean the brass contacts and the slots that the memory (ram) goes into of dust and any other foreign objects.
When you are satisfied that all the dust has gone reseat the memory back into the slots making sure they/it clips into place nice and tight, put back the side panel, plug the power cord back in and try to restart the PC.

Good luck and thanks for using FixYa!!
Repair Help & Product Troubleshooting for E-Machines eMachines Desktop PC

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Cpu upgrade , please help


Tech-gu818, When looking to see what processors a computer will support, try to find out what motherboard chipset is on the motherboard, and the processor socket.The motherboard chipset is the;1) Northbridge chip2) ... E-Machines eMachines Desktop PC

My desktop computer won't connect to the Internet


HI there,eDriverDownload.com helps you find Emachines drivers for your devices. Emachines T2698, T2778 Driver is a property of its respective aut ... E-Machines eMachines Desktop PC

I have a hp compaq presario sr2013wm desktop that recently died on me. i didn't have a backup copy to reinstall so i used my moms copy from her computer (she has a emachine) (i figured it was windows xp, it would work.) i now have my computer back, under an emachine but it won't let me connect to the internet (i have fiber internet) it comes up page cannot be displayed. but it works on my laptop just fine. the desktop is for my kids, can you please help.....


Hello, the reason internet is not working on this newly installed windows XP is becuase (most likely)you are missing network card drivers. \015\012To verify right click "My Computer", and select "Properties", then click on "Hardware" tab and cl ... HP Compaq Presario SR2013WM (RE468AA#ABA) PC Desktop

Desktop ( Emachines 210 ) Very slow ? Ran via win xp proffesional


Try going to the control panel>performance and maintenance>disk cleanup. After running cleanup run the defrag. You can also cleanup your internet browser by deleting cookies, temp internet files, & browsing history. See if this helps speed ... E-Machines eMachines Desktop PC

Pinout on t6410 gATEWAY CONNECTING POWER BUTTON


I don't see that this problem was solved. Adding additional information.The eMachines T6410 Desktop PC uses an MSI MS-7145 motherboard.(MicroStar International ), ... E-Machines eMachines Desktop PC

I'm trying to find what the cpu socket is so i can upgrade it


According to eMachines Support, the eTower 466id Desktop Computer uses an Intel Celeron 466MHz CPU.(Central Processing Unit. Also known as Microprocessor, and short term - Processor)Information for the Intel Celeron 466MHz CPU ... eMachines etower 466id PC Desktop

Don't know how to reformat my emachine T5010 desktop PC


Reformatting your Windows computer is usually the absolute last resort and is often done unnecessarily. Before you go through the process of doing a reformat of your hard drive please take a few moments to read through the rest of our w ... E-Machines eMachines Desktop PC

CD drive not working


Based on your indication the CD drive is clean, and you know the cables are attached to it, inside the computer. (Flat ribbon IDE interface cable, and 4-pin Molex connector power cable)1.Go to Device ManagerLeft-click on Start ... Sony VAIO PCV-RX462DS PC Desktop

Need manual for Eone 433 desktop computer


I had the same problem recently with an emachines Eone 433 desktop. Taking it apart is certainly difficult. First of all, the metal compartment that holds the motherboard and drives is beneath the CRT monitor. In order to access and remove the compar ... E-Machines eOne 433 PC Desktop

Drivers Emach T5230


I solved this problem completely later that day.\015\012Here's how:\015\012\015\012From the Emachines site I downloaded and installed the file:\015\012RealTek_Audio_5_10_0_5152. \015\012\015\012This dirver is for v ... Microsoft FREE Sidewinder Gamepad Pro-Retail (MSC1800018PRO)

Emachines T2698? This is my sisters computer and she ahs had it for sometime not really sure how long but just this past weekend the computer was running real slow and her father in-law went ahead and did a system restore. She told me that when they got done with the restore everything worked better. She also has a Emachines laptop that is acting up and so she went to try her desktop computer. She pushed the power button and it came on but it stops at a big E on the screen and you can't do anyti


Hi,\015\012\015\012On the e-Machine desktop, go to the CMOS/BIOS set-up and set everything to default or fail-safe settings. Save and Exit. Verify also that the desktop auto detected the hard disk.\015\012\015\012If the unit will still not boot to th ... E-Machines eMachines Desktop PC

My emachine is slow loading and constantly buffin, not being able to watch movies on utube My final question is how do I know my computer needs to be upgrade other that the fact that the emachine is an older model computer, and my 23 year old telling me. This is my computer key # QBM7G-BXRWR-XJC9J-VRXPH-F7VPT


HelloWell, the buffering on you tube is purely proportional with the speed of the internet connection you have, it means that the video plays faster than that which your internet connection is able to load, thus it starts to buffer. ... PC Desktops

Emachine destop not recognising acer lcd monitor


It sounds more like the computer isn't starting up. The "no signal" message is coming from the monitor itself to tell you it's on but there's nothing coming in to display. Normally no special drivers are required for the monitor, and you'd see at lea ... Microtek C593 15" Flat Panel LCD Monitor

Toshiba Satellite 1400


To Access the Bios Setup Utility Here Is A List Of Key Commands And The Make/Model They Are For..\015\012\015\012Acer - Aspire, Power, Veriton, Extensa, Ferrari, TravelMate, Altos\015\012\015\012 ... Toshiba Satellite A35-S159 Notebook

Emachines desktop Wont boot. - E-Machines eMachines Desktop PC


A simple and effective task (well most of the time) is to reseat components on the motherboard. This can include unplugging the components, including but not limited to:Hard Drive and Optical Drive CablesIDE/SATA ConnectorsSys ... E-Machines eMachines Desktop PC

Emachine Desktop Question: How do I go about setting up my Grandson's Emachine desktop computer. There is no operating system installed (whipped out). Another problem it does not have wireless access (802.11) connectivity and his father cannot afford a landline number. PLEASE tell me what to do to get this working. What is my first step ???? This is a child that desparately needs to have a computer. PLEASE HELP....Sharon [email protected]


If this unit is more than several years old it probably will not run Vista very well. If you are doing this on a budget go online with another computer and do a Google search for Linux. There are many free versions of the Linux OS. Ubuntu is supposed ... E-Machines eMachines Desktop PC

EMachine 2862 Desktop Dead On Power-Up


Check all the leads to the hard drive and check that the fan starts spinning when you switch it on if it dont start then the problem is the switch these do often go and can be easily replaced and they are not expensive i had the same problem and foun ... E-Machines T2682 (000002965) PC Desktop

My emachines EL 1200 desktop stopped working during bad storm


You can try to reset the computer by removing all power sources and letting it sit for a time. Then powering it back up and see what happens. That's called a hard reset. \015\012I am guessing that the storm surge damaged your motherbo ... PC Desktops

EMachines T6528 desktop will not boot up


The power supply fan runs from either 5V or 12 so that only tells you that the voltage for fan operation is present.\015\012\015\012If you don't have a multimeter already, I would highly advise that you buy one.\015\012They are available for &l ... E-Machines eMachines Desktop PC

Emachine t3524 keep restarting - E-Machines eMachines Desktop PC


Suspect bad Electrolytic Capacitors, in the motherboard Voltage Regulator circuit, of the motherboard. eMachines motherboards are known for having bad 'Caps'. Low quality, due to poor quality of components used in the capacitor. ... E-Machines eMachines Desktop PC

Laptop wont print to remote printer


You need to share the printer from the desktop IWIN XP) computer that has it connected locally. Then connect to the shared printer from the laptop. Here is how to do this...\015\012Sharing Printer Windows\015\012\011\011\015\012\011\011\0 ... HP Pavilion dv6000z Notebook

Is there a system recovery disk for the emachine ET1161-07 desktop pc?


If you bought the computer new and did not receive a recovery disc with it then the recovery software can be reinstalled from a hidden drive built into the computer.The steps for re-installation: \015\012\015\012 ... eMachines ET1161-07 Desktop PC

I can only get color background on my desktop display


I cannot get a picture from my computer onto as my desktop or background? Ive right clicked and it still does not let me change anything ... PC Desktops

BeNQ FP71E Monitor won't display desktop


The problem seems to be with the monitor.When there is no Display,if you power-off and on again do you get a Benq Startup screen?If not the problem should be dry solder on the Invertor board.Try tapping screen lightly,if it comes on the problem is dr ... BenQ FP71E 17" LCD Monitor

My emachines monitor has no picture, hard drive is functioning properly. Monitor is black


If you do not get a screen with a LCD monitor its likely you have a inverter problem or BACKLIGHT problem. you might need to replace the LCD backlight or replace the monitor on the desktop.\015\012check to see if the laptop can get a picture by ... PC Desktops
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.8063 seconds