Having problems with your E-Machines eMachines Desktop PC ?

T6410 EMACHINE TRYING TO CONNECT START BUTTON

\015 THE BUTTON HAS THREE WIRES ONE IS POWER SW BL\\WH COLORED WIRE THE NEXT IS POWER LED GREEN\\WH WIRE AND THE LAST IS H.D.D LED RED \\WH WIRE ON THE MOTHER BOARD THE ONLY MARKS THERE ARE JFP1 AND JFP2\015

Answers :

The motherboard in your computer is an MSI MS-7145, which is also called RS480M. You can download a copy of the manual here. The front panel connections are on page 2-20.

Looking at the header JFP1, pins 1 through 9 (odd numbers) are the front row, pins 2 through 10 are the back. Pin 10 is the missing pin. The power switch connects to pins 6 and 8. The power LED connects to pins 2 and 4. The HDD LED connects to pins 1 and 3. The reset button, if used, connects to pins 5 and 7.
Repair Help & Product Troubleshooting for E-Machines eMachines Desktop PC

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

T6410 EMACHINE TRYING TO CONNECT START BUTTON


The motherboard in your computer is an MSI MS-7145, which is also called RS480M. You can download a copy of the manual ... E-Machines eMachines Desktop PC

I have a emachines t6410 pc and a 15 inch led monitor that came with it. It is apx. 5 yrs old. Am having issue with monitor turning on. If computer sits for a long period (a few hours) without being used the monitor seems to hibernate even though I do not have this option checked. Trying to get it back on is an experiance! I keep fiddlng with the power cord, the cord from pc to monitor, pushing button off n on and finally the blue indicator light will start flashing and eventually the monitor tu


There are two forces involved, one is the monitor itself and the other is a display property. To turn back on press space bar, and that will reactivate.\015\012\015\012Your description sounds like your machine may be sleeping or hibernati ... E-Machines eMachines Desktop PC

Emachine T3504 monitor controls locked out


The problem is not one easy... The IC with controls system is down... sorry but u must go to an expert to fix the bug! Rate me if this help's you Thanks! ... E-Machines eMachines Monitor E15T4

Emachine t5026 on and right off


Hi maybe you could try these steps I'm always doing when I experience the same problem as yours. This is only according to my experience fixing desktop computers.1. Try to disconnect all the connection at the back of your computer tower t ... PC Desktops

Pinout on t6410 gATEWAY CONNECTING POWER BUTTON


I don't see that this problem was solved. Adding additional information.The eMachines T6410 Desktop PC uses an MSI MS-7145 motherboard.(MicroStar International ), ... E-Machines eMachines Desktop PC

T2893 desktop did not power on when I hit the power button


If you can find someone that has the same model, that is the best way to make sure it fits. Some other motherboards will fit, but you may have to do some work to get them to fit. The best way would be to try to do some research on your particul ... E-Machines eMachines T3830 PC Desktop

My pc was doing this but now it's doing something different but simular


Try this: boot into the bios, set the boot order to cd rom first,hard drive 2nd and either one to 3rd. Hit F10 to save changes & exit. Put in your Windows cd. It should come up to a screen that says "Hit any key to boot to cd", do that. Set up sh ... E-Machines eMachines T3830 PC Desktop

Need schematics for front panel , power sw , pwr led , hdd led et


Try this link to Emachines page. After you put in the make and model and stuff you should be able to view the user manual for your machine. If this isn't what you need you are able to contact support from this page and maybe they can direct you to a ... E-Machines eMachines Desktop PC

I accedentally knocked the power wires off inside the big box i cant think of the name on my emachine w3507 how do i put back together


Power On switch, (Button), wires from the front panel that go to the motherboard? I could really use the name of the motherboard, to try to get you this information. I don't have an eMachines W3057 sitting in front of me, at the mom ... eMachines W3507 PC Desktop

T2682 emachine running fine video lite went yellow & HD also


The first thing you should do is remove the video card and try to boot\015\012the PC using the onboard video (video on the Motherboard) and see if\015\012that solves the problem. If it does, try putting the video card back\015\012in in a DIFFERENT P ... E-Machines T2682 PC Desktop

Emachine T6410 turns on but the screen says ''No Signal''


When you get the no signal ..this is just the cable that plug into the monitor...either on the video card ..or on the monitor side...but it is sure the cable ...whenever that signal is on ...this means that it do not detects any video signal came fro ... PC Desktops

Emachine 17" lcd monitor from Best Buy


... E-Machines e15t 15" Flat Panel LCD Monitor

Emachine beeps Hey, we just got a new emachine and we have the same problem! We got it mid/end of April but were in the process of moving so it stayed in the box till about a week ago. I hooked it up and when you press the on button it beeps 5 times then you hear the fan kick on like its thinking about starting up but then it just stops and beeps until you turn it off. The monitor says no signal and then goes blank. Any advise?


That would be a problem for e-machine. The beeps are codes. I will try to help, but it is hard to diagnose without looking at it.You can try several things. Open it up and make sure that everything is seated inside. Make sure the memo ... PC Desktops

Computer in black screen, no energy outputted


A few possibilities(the only problem is if you never get any display to try many of these suggestions):\015\012\015\012-Suspend. With suspend, everything is put to RAM and the computer goes to low power state, shutting off USB, HD, and most other thi ... E-Machines eMachines T3830 PC Desktop

Emachine 750 loads Windows XP, shows emachine picture and locks


Try this reinstall ur windows from ur emachine recovery cd and this should help let me know if it does ... E-Machines eMachines Desktop PC

EMachine W3107 will not boot, no display.


Have you tried a different Graphics Card, looks to me like the onboard graphics card is at fault, there should be an AGP slot or PCI slot that you can plug a new Graphics card into then you should be fine... ... PC Desktops

I have an encore wireless USB adapter that won't work.


Hi did the usb adaptor come with software or not also have you tried letting you computer scan for hardware devices.As its usb it should be plug and playIs the adaptor for sending data from things like phone etc via bluetooth they are usu ... E-Machines eMachines Desktop PC

Have emachine T1150 - the on off button when pushed in is getting stuck and machine will no longer turn on. Can this be fixed and is it worth the cost ? Can I fix myself ?


The switch on the outer plastic front panel is usually just a plastic peice with a spring, it pushes the button in on the inside metal housing of the computer case, therefore not really much to worry about, you just need to remove the front panel to ... E-Machines T1150 PC Desktop

MY COMPUTER SCREEN HAS GONE SMALL I am trying to solve it according to the following help note. But i cannot find display adaptor in device manager box Try right clicking on the desktop then selecting "properties". A window should appear. Click the "settings" tab at the top of this window. In the settings screen is a slider bar for screen resolution try sliding this to different places and clicking the apply button at the bottom of the screen until it is right. If this does not work go to start


Your screen is too small it is because the display driver is not installed that's why there's no Display Adapter in device manager, to solve this:1. Identify your Emachine's model name and download the driver for your display adapter here ... E-Machines eMachines Desktop PC

I have recently purchased an emachine EME627. It initially worked but now I cannot access the internet or any of the features. A message comes up stating that I need to make factory recovery discs but after four attempts it keeps freezing during the verification process.


Hi.\015\012\015\012\015\012Try first a recovery using the recovery partition. This is done choosing "System Recovery", or doing F11 on startup. The system will prompt "Preparing system recovery options" then the recovery procedure will start. ... E-Machines eMachines Desktop PC

EMachine will not turn on.


Sounds like the power supply is faulty. Power supplies are very dangerous to try and repair, even for qualified technicians. I would also suggest not trying to plug it in or turn it on until the new power supply is in place. Faulty power supplies ... E-Machines eMachines Desktop PC

No power on my emachine


The power supply might be okay but the system board could be bad and not turning the power supply on when you press the power button.On this page:http://www.helpwithpcs.com/courses/power-supply-basics-inc-pinouts.htmabout midw ... E-Machines eMachines Refurbished EMA SYSTEM BOARD MODEL T2984 eMachines (102257) PC Desktop

Replaced power supply on T2240 emachine now cant get onboard video" or any video,also tried PCI video card with no results. Need video to see if machine can boot


Unplug the computer for at least one minute. Press power button for 4 secondS while the power cord is unplug. Plug it back listen for beeps short and long beeps count them and refer to bios codes. If nothing happens remove everything from the mothe ... Intel PC Desktops

Gatweway lap top button light up, but wont turn on


I'm afraid this sounds suspiciously like a motherboard problem. It would help to know what model etc, as some Gateway & EMachine model laptops have had extended warranties due to motherboard issues, or just go to Gateway.com and research it yours ... PC Laptops

VGA doesn't work on my EMachines W2040


THIS TYPE OF PROBLEM IS CREATED SOME TIME DUE TO BIOS CONFIGURATION. GO TO YOUR BIOS CONFIGURATION ENABLE PLAY & PLUG DEVICES. ENABLE YOUR VGA TO INCREASE 64 BYTE.\015\012\015\012OR REMOVE BIOS BATTERY CLEAN IT AND INSERT LIKE SAME. OR SET YOUR JUMPE ... E-Machines eMachines Desktop PC
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.7878 seconds