Having problems with your E-Machines eMachines Desktop PC ?

How do i install a new graphics card in an emachine t5224?

\015 Must i remove the existing card or install the new one beside it? and what drive does it get installed in? all of mine look too small.\015

Answers :

If you're replacing the graphics card then it should go into the same slot as the one you are replacing. To do this, turn off the machine, remove the old card (if it's an AGP card they'll be a card lock on the inside end of the card where it plugs into slot). Remove the card lock, and then remove the card. Reinstall your new card. Keep in mind that your new card must be the same type as the old one AGP or PCI. The slots for these are different and you could damage the card and the slot.
Repair Help & Product Troubleshooting for E-Machines eMachines Desktop PC

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

How do i install a new graphics card in an emachine t5224?

If you're replacing the graphics card then it should go into the same slot as the one you are replacing. To do this, turn off the machine, remove the old card (if it's an AGP card they'll be a card lock on the inside end of the card where it plugs i ... E-Machines eMachines Desktop PC

Installing radeon s9259 graphics card on a emachine t5010

Did you try to after you install the card to go into the control panel and install new hardware in the add new hardware. If I understand you, when you plug the monitor into the new video card it does not turn the monitor on, Even after you install th ... E-Machines eMachines Desktop PC

Disabled video driver. Now unable to reboot emachines T5246

To reset bios with jumper settings: there is jumper on the board that has to be moved to the other adjoining pins, and then back. Hopefully it is marked. For sure check your owners manual, or google your mobo for the location of the jumper and exact ... E-Machines eMachines Desktop PC

Lagging bad on internet low FPS rate

Lag problems wont be anything to do with your monitor, more driver problems or an incompatibility with your new card. Try getting up to date drivers and contact their tech support (the graphics card) and give them your system spec. They will advise i ... E-Machines eMachines Desktop PC

Windows Installation Lock-up

Just had this excact same problem with a tech call. Warrenty Corp of America sent out a new MB, HDD, Processor, and Memory, after replacing that all same problem. They then reccomended new recovery CD's, We found some on ioffer.com, I don't know if ... E-Machines T2792 PC Desktop

Cpu upgrade , please help

Tech-gu818, When looking to see what processors a computer will support, try to find out what motherboard chipset is on the motherboard, and the processor socket.The motherboard chipset is the;1) Northbridge chip2) ... E-Machines eMachines Desktop PC

No display from VGA adapter.

The graphics card won't initialize unless the system passes certain internal checks; most of the time this is caused by the wrong RAM configuration. Make sure the RAM you are using is the right type of RAM for your system; in some cases the system bo ... E-Machines eView 15s Monitor

I going to buy a emachine et116107 today and i

That particular model has PCI-Express slot for optional upgrades. So if you decide to upgrade the graphics look for anything with a PCI-E label or PCI-Ex16. If you do get a new card make sure to disable the onboard graphics in the system BIOS prior t ... eMachines ET1161-07 Desktop PC

Can't set up network w linksys modem

Video card:Your computer has an integrated video card but has a "PCI Express" expansion slot for an upgrade. After the upgrade you will be able to play most games without the choppy frame rate...depending on what card you buy. Since ... PC Desktops

Counter Strike Graphics 'Set Pixal Format Failed'

Hi :)When you updated your graphics card and ran CSCZ it tried to run the game from its previous setting and found they had changed. upon realizing this CSCZ may have changed its graphisc setup to your new graphics card which as you said ... Sierra Online, Inc. Half-Life: Counter-Strike for Windows

EMachine Video Card upgrade

And as well i am having the same problem because i have a 9800 nvidia and my monitor still not showing up and as well how do i solve that problem ... E-Machines eMachines Desktop PC

My computer (emachines T5212) beeps at me

Resetting the bios should stop the beeps, 'JBAT1' terminal from pins 1-2 to 2-3 for a few seconds then back to pins 1-2.\015\012\015\012Get the pc running again on your onboard graphics or whatever it was, but enter the bios (f2 or DEL on start up)as ... E-Machines eMachines Desktop PC

My 2gb ram stick died, so I tried upgrade to 4gb

Most appreciated naturalgal66. Perhaps you would like more information, to put together some of the information I stated in the Clarifications.This is a motherboard block diagram,http://en.wikipedia.org/wiki/File:Motherb ... HP Pavilion a6600f Desktop PC

Faulty motherboard? Hi, my PC has an ansus p5vd2-mx motherboard, intel duo core processor, pci express slot, gforce graphic card. I upgraded the graphics card for faster secondhand one which resulted in loss of video signal and 1 long and 2 short beebs from the BIOS ( faulty graphic card? ) Replaced the original graphic card but still getting the same error beebs and no video signal. The fan on the graphic card is still working so it must be drawing power from the pci express slot. My question i

Bullnosestep\015\012\015\012\015\012It is possible that the new (secondhand graphics card) was faulty and sent an incorrect voltage to part of your motherboard (frying it). However in my experiance it is not likely, I have installed ... PC Desktops

Blank screen after boot up

This issue may occur if one of the following conditions is true: \015\012Cause 1\015\012\015\012 loadTOCNode(3, 'cause');\015\012 \015\012This issue may occur if you have a CD, a DVD or a floppy disk in your CD, DVD, or floppy drive ... Dell Dimension 3000 PC Desktop

Black screen, no boot

Does the mobo have integrated graphics? If so, you may want to try installing a new graphics card and disabling the onboard. I had the same problem with an eMachines. When I installed the AGP card, it worked just fine. ... Gateway NMZ-500SE Notebook

Cannot reinstall Windows XP pro to my hard drive which had it alr

I have found 2 websites taht can help you somewhat:\015\0121) this is the one with the steps that can help you, ... E-Machines eMachines Desktop PC

Graphics upgrade Is it possible to install a graphics board into an Acer L100 PC?......while I am happy with the overall performance it refuses to run many of the new games on the market due to the high demand in graphics.

As long as you have a open vga, vga e, or pci slot in your computer you should be able to install a new video card. the Acer website says your motherboard supports up two gigs of ram, I am not sure how much ram you are runni ... Acer Aspire L100 PC Desktop

Steps tp instal Nvidia 6200 AGP card

Once you have your computer unplugged and taken apart to the point where you can access the AGP slot, take off the small metal cover on the back of your computer (usually fixed with a single screw). Gently place the Nvidia graphics card into the slot ... AMD eMachines Desktop System w/ 17'' CRT Display, 2.0 GHz Athlon 64 3000+ (W3400)

Dell 1600SC Server - trying to install a video card

Try repeatadely pressing delete on startup with the monitor cable attached to your onboard graphics socket but keep the new graphics card in. then you should go into the bios. change the graphics setting to your graphics car and then save and reboot. ... Dell PowerEdge 1600SC Server

Can't see screen to install diver for HP Compaq WF 1907

My friend just purchase this monitor yesterday. When she plugged it in to the back of the tower she received the same prompt u have mentioned. I was able to repair it because she simply did not realize that I had installed a new graphics card into he ... HP Compaq WF1907 Monitor

Hi i want to install grafics card in my laptop

Do you want to install the driver for the card that is already in the Laptop? Or are you looking to install a new hardware graphics card?? Because this is close to impossible for laptops. Do you have an expresscard slot? ... ATI TP T42 Notebook

HP Compaq d530 SFF PC

No Ben, there is no jumper for this on the motherboard.The method is to go into BIOS Setup, and change it to AGP. (Should be the default factory setting however, IF you have an AGP graphics card installed)For your comput ... HP Compaq d530 SFF PC Desktop

No display on Monitor

... Samsung T260 Monitor

Think new graphics card needs me to by new PSU. Need second opinion and suggestions. Think my current PSU is 375. Since i installed this new graphics card the PC has frozen after 30 mins or so of use. Put the original 7300 card back in and everything is fine. Anything on newegg.com as a suggestion would help. Not a gamer and not trying to break bank. Thanks!

Doesn't sound like your PSU is running out of power, sounds more like you are overheating your graphics card.Have you got enough cooling in your PC for the new graphics card, is anything blocking the airflow, like maybe the PSU, or if cab ... Dell XPS 400 PC Desktop
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.8073 seconds