Having problems with your E-Machines eMachines Desktop PC ?

Windows system 32 hal.dll error after restoring e-machine

\015 Problems had come up where we needed to format the hard drive and reinstall all the factory applications that came with the e-machine. So we put in the CD and hit R. We asked it to perform the "destructive" test to format the hard drive and reinstall all applications from the OS disk. I have only one disk from e-machines. I understand this disk can format and re-install software. After reformatting an error comes up saying missing hal.dll files or corrupt. I cant get any other screen other than this one or even type a command in to try and install dlls. I'm going nuts trying to solve this. Your help would be so appreciated!\015

Answers :

There's actually a number of reasons why these annoying little DLL errors happen, but the most common, is caused when new programs are installed over all old ones and the old ones are not completely uninstalled 100%, causing registry pile ups and of course, getting a .DLL error messages.
\015\012Another reason, is damage that's been done by malware/spyware/adware programs, attaching themselves to your PC and wrecking havoc, deleting crucial DLL files from your PC.
\015\012The hal.dll file is created during install from 5 other dlls. HAL is the Hardware Abstraction Layer and it's the interface between the system drivers and the actual hardware.
\015\012Copying hal.dll will not resolve the problem.
\015\012A lot of times the file will be reported missing due to corruption of the boot sector or of the file system
\015\012Causes of the "missing or corrupt hal.dll" error include, naturally, a damaged hal.dll file or a hal.dll file that has been deleted or moved from its intended location.
\015\012Additional causes may include a damaged or missing boot.ini file or possibly a physically damaged HDD.
\015\012Suggested remodies-
\015\0121. Restart the PC. The hal.dll error could be a fluke.
2. Check for proper boot order in BIOS. You might see the hal.dll error if the boot order in BIOS is first looking at a hard drive other than your main hard drive.
\015\012Note: If you've recently changed your boot order or recently flashed your BIOS, this may be what's causing your problem.
3. Run Windows XP System Restore from a command prompt. If this doesn't work or you're receiving the hal.dll error message before you're able to complete this process, move on to the next step.
4. Repair or replace the boot.ini file. This will work if the cause of the problem is actually Windows XP's boot.ini file and not the hal.dll file, which is often times the case.
5. Write a new partition boot sector to the Windows XP system partition. If the partition boot sector has become corrupt or isn't properly configured, you may receive the hal.dll error.
6. Restore the hal.dll file from the Windows XP CD. If the hal.dll file is truly the cause of the problem, restoring it from the original Windows XP CD may do the trick.
7. Perform a repair installation of Windows XP. This type of installation should replace any missing or corrupt files. Continue troubleshooting if this does not resolve the issue.
8. Perform a clean installation of Windows XP. This type of installation will completely remove Windows XP from your PC and install it again from scratch.
\015\012Note: While this will almost certainly resolve any hal.dll errors, it is a time consuming process due to the fact that all of your data must be backed up and then later restored.
\015\012Important: If you can't gain access to your files to back them up, understand that you will lose them all if you continue with a clean installation of Windows XP.
9. Replace the hard drive. Finally, if all else has failed, including the clean installation from the last step, you're most likely facing a hardware issue with your hard drive.
\015\01210. Perform a new installation of Windows XP after installing the new hard drive.
\015\012I have not tried it - but HERE is a free program purporting to fix the error.
\015\012Thanks for using FixYa - a FixYa rating is appreciated for taking the time to answer your FREE question.
Repair Help & Product Troubleshooting for E-Machines eMachines Desktop PC

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Windows system 32 hal.dll error after restoring e-machine

There's actually a number of reasons why these annoying little DLL errors happen, but the most common, is caused when new programs are installed over all old ones and the old ones are not completely uninstalled 100%, causing registry pile ups and of ... E-Machines eMachines Desktop PC

System restore on server 2003

Before we begin, you'll need an XP CD. Doesn't matter if it's home or pro. It shouldn't matter if it has a service pack on it, since all the files will be the same source. In testing i used a slipstreamed cd that already had sp1 on it.In XP, sy ... PC Desktops

Freezing - Dell Inspiron 1525 Laptop

So, you post a message like a telegram. "freezing". since you never\015\012mentioned any other details, i have no option to assume that its a dell\015\012some laptop. the solution which i am writing is universal and applies\015\012to all the laptops. ... Dell Inspiron 1525 Laptop

First I had this problem on my old Dell Pentium II computer. It would keep saying ''network connection unplugged''.At first I could plug and unplug and get it back. Eventually nothing. I went through tech support who said my modem was the problem. I got a new modem, installed the driver, still did the same thing. Then I went and bought a new laptop, cuz I need computer for school. I got the router going with it and had no problems. Thinking it couldn't hurt, I plugged my Dell into the router, an

Seems that you are having a big trouble. :)U cloned the MAC adresses ... I wonder what that means...Anyway......Now both machines can't be connected to the internet...Did u check your network card of the XP machine? If there are any error ... Intel Pentium M , 1.5 GHz Processor

System is blue screening giving an error meaasge ....registry file corrupt. error 0000146. I am told there may be a hardrive crash...can it be repaired??

Yes.\015\012\015\012At the Windows XP Recovery Console command prompt (C:WINDOWS>), perform the following steps: \015\012\015\012\015\012\015\012Type the following command:cd There must be ... Dell Latitude X300 Notebook

Unable to print using samsung print on Windows XP

To resolve this issue, follow these steps: 1. If you do not have a Lexmark printer installed, go to step 4. If you do have a Lexmark printer installed, go to step 2. 2. If the Lexmark print service is installed on your computer, turn off the Le ... Samsung PC Laptops

Turn on computer and message reads ****bad check sum (CMOS) ****

From Toshiba Support:IssueWhen you turn your Toshiba computer on, you see an error message like: **** Bad RTC battery ******** Bad Checksum (CMOS) ****Check system, then press [F1] key The\015\ ... Toshiba Satellite 1805-S204 Notebook

Cleaning my files, accidentally lost drivers for my Pioneer DVD-ROM DVD-117R, also Pioneer DVD-RW DVR-104....driver 5.1.2535.0 System restore could not take me back far enough, and cannot load Recovery discs because of disc drive failure due to driver missing...Thanx John Bootle

\015\012BAD DVD\015\012Windows 7\015\012To resolve this problem on a computer that is running Windows 7, use the Hardware and Devices troubleshooter. For more information about how to open this troubleshooter in Windows 7, visit the fo ... PC Desktops

Just when it starts to go to windows it will recycle also when I try to put a new os error message will come up and it will shut itself down?

Okay. What your describing is normally a memory problem. Try pulling a stick of ram out if you have more than one stick in the machine. If it still starts funny then try another stick. Also, the reboot is likely to be caused be a boot error (obviousl ... PC Desktops

Every time i go 2 log in. it won't let me. was working good yesterday. lisa barnes

First you need to go safe mode:-\015\012\015\012One way to reach safe mode is by booting up and pressing the F8 key right after the POST check. In practice this can be tricky to time correctly and all too often you can end up in the regul ... Acer Aspire 5500 5570-2609 Laptop

My pavillion dv6700 starts up then goes black

Hi,\015\012Sorry to hear about this. I presume you can't log in in "Safe mode" (pressing the key "F8" while booting) and then to a system restore (available under Accessories -> System tools -> System restore)\015\012Nor you have the Windows Re ... HP PC Laptops

I am getting error message for win32 generic host data executor prevention

Here is my resolution to the error SVCHOST.EXE GENERIC HOST PROCESS OR DEP ERROR IT DOES NOT INCLUDE DISABLING WIA OR DISABLING DEP (which is a good security feature) I have tried it on upto ... Dell Inspiron 6000 Notebook

How can I fix a bad system config info err

I seem to be a little late, as you've indicated you're going to re-install, but I just had this problem with a Dell Dimension machine. Microsoft says it's probably a RAM issue, but it wasn't in my case. The problem was that the system hive was corrup ... Dell Dimension 8400 PC Desktop

1005he can not connect to wireless internet. have another laptop and not having same issue.

Hmmm - are you able to connect to other networks? are you getting a "no connectivity" message? Is wireless not showing at all? If the latter, have you tried checking that wireless is enabled? You may have accidently turned it off by hitting F2 key ... ASUS Eee PC 1000HE Netbook

Bad Pool Caller message??

BAD_POOL_CALLER is a stop error message that is caused because of problems with the memory management.\015\012\015\012There is a list of more than thirty such causes that can give you this error message. If the stop error is consistent ev ... PC Laptops

000021a error I'm getting the 0000021a error. I'm rtying to reload the OS but it doesn't recognize the CD/ROM even though the order is correct to go to it first. Tried to boot in safe mode and it's telling me I have a video driver error. Seems like a lot more than just that.

If your system does not boot, is due a:1) Order Bios (Put Cd at the first place)\015\0122) The CD used is not a bootable CDAre you using a bootable cd?Assuming your system is set to boot from the CD-ROM drive ... Dell Dimension 4600 PC Desktop

USB Hardware Installation Problem

Try the following:\015\012To fix the Error 13: Data is invalid problem, go to Start, Run... and type\015\012"REGEDT32.EXE" without the quotes to run the Registry Editor. Navigate to\015\012\015\012\015\012\011HKE ... Dell Inspiron 6400 Notebook

Programs Freeze UP

The best way to solve most of the problems If you are getting them constantly, would be to use the recovery disc or windows setup cd to perform a fresh installation of windows into your computer.before doing it though, would be a good ide ... Dell Dimension 3100 PC Desktop

Error 39, corrupt DVD/CD-Rom Drive

Dear NICK, its a windows registry related problem, you can fix it through :This method, or task contains steps that tell you how to\015\012modify the registry. However, serious problems might occur if you\015\0 ... HP Pavilion dv6000z Notebook

I want to restore my a25-3072 laptop back to factory specs.

Ok first things first I believe you mean "XP tablet edition" instead of "Desktop Management Interface"\015\012\015\012A Tablet edition just means laptop version of and operating system. Laptops need different o ... Toshiba Satellite A25-S3072 Notebook

When our IT people installed Office 2007 Plus Professional on my 64-bit Dell machine, they (and now I) get a error 2711 error message only when I open Outlook: an internal error has occurred (Outlook CDO). Is there a way for me to use regedit and clean up this problem without having to reinstall Office 2007?

Actually first try to update the machine in windows update , there might be a fix for this error, in the control panel on vista look for windows update,, you can also have a look at Problem Reports and errors to see if it has a solution, If you have ... PC Desktops

Windows failed to start !...

Hello\015\012\015\012You seem to know a bit about computer so I will give you a good detailed solution which might be of help. READ CAREFULLY\015\012\015\012ASSUMPTION:\015\012 \015\012I guess that t ... Acer Aspire 5920-6727 Notebook

Recovery problem i have acer aspire 4930g vista home premium installes in it.......i have not got any cd with my laptop and i forget to create a cd also .........so i had tried to do recovery from hidden partition by pressing alt+f10 .....after that a option come restore system from factory default.....when i click it it showing me error..........and when i started my laptop it showing now that boot mgr is missing press alt+ctl+del to restart......please help me

First go with assumption that you can get ALT-F10 to start recovery-- if the error message gives an option to ESC. the next screen might be similar to an F8 boot screen with option to start operating system or diagnos memory. if a choice is ESC, es ... Acer Aspire 5610-4648 Notebook

Vista wont let me log in

How to Fix the Error "The User Profile Service failed the logon. User profile cannot be loaded."\015\012Information. When you log on to Vista using a temporary profile (user account), you receive this error message:\015\012For more information, KB947 ... PC Desktops

Blue screen when I close the top of my laptop or shut it off

This error relates to video drivers. to fix this. restart your computer and as soon as you see dell keep tapping the F8 key in the top row to get advanced boot options. and then select "Enable VGA Mode" and press enter 2 times. then the computer shou ... Dell Inspiron 6400 Notebook
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.7985 seconds