Having problems with your E-Machines eMachines Desktop PC ?

Frequency out of range on monitor and blacks out but pc still running


Answers :

You've selected a screen resolution that is too high for your monitor to display. You'll want to restart and run windows in safe mode with minimal drivers installed and change the settings back to a tolerable level.

Never force a monitor into a mode that it can't display. Although the OS can protect it, if it doesn't, you can destroy your monitor.

Select 'only show modes this monitor can display' in the properties of your monitor inside display properties to ensure that this doesn't happen again.
Repair Help & Product Troubleshooting for E-Machines eMachines Desktop PC

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Comp makes a buzz noise and wont show any start up


Suggest you,A) Look at the back of the computer at the Power Supply fan, and tell me if it's spinning. (Where the power cord plugs in, is the Power Supply)B) Open the computer case, look at the Processor fan, and tell me if it ... PC Desktops

Gateway Monitor We have a Gateway 17'inch LCD monitor and in no particular sequence the monitor will blink on and off, and go completely black and the green power light will also go off. We have changed the power cables and this still has not solved the problem. What else could be wrong?


Unfortunately, the power supply is internal to the monitor\015\012and this is the likely problem. \015\012\015\012It is of the 'universal' input type that is compatible with\015\012a range of  ... Gateway FPD 1730 17 in. Flat Panel LCD Monitor

Frequency out of range on monitor and blacks out but pc still running


You've selected a screen resolution that is too high for your monitor to display. You'll want to restart and run windows in safe mode with minimal drivers installed and change the settings back to a tolerable level.Never force a monitor i ... E-Machines eMachines Desktop PC

Dell Inspirion Laptop Screen Randomly Flickers, Then Blacks Out


If this laptop is only a few monthe old, then it should be still under warranty. I suggest you return it to the supplier for repair or replacement under warranty. If you try to repair it, most likely you wil void your warranty.\015\012\01 ... Dell Inspiron 1100 Notebook

Computer Screen turns black, Computer still runs.


Brownsterz,\015\012\015\012This sounds to me like the game, caused a fault in your video driver that somehow adjusted your resolution/refresh rate to something beyond your monitors range.\015\012\015\012If this is the case we ... PC Game Controllers

Frequency out of range 11khz/ 119khz message


The PC is sending out the resolution that is too high for the monitor to handle, you need to set the resolution of the PC to be the native resolution of the monitor and set the refesh rate to be at 60Hz. ... Envision H191W Monitor

When i run sparta exe the screen goes black and monitor starts blinking but game sound is still coming i m running the beta version of windows 7 buil 7000 help me


This usually happens when the game selects a video resolution, or frequency rate your monitor doesn't support.See if there's any way to set the game resolution, some program to configure it, or even a text file with the configurations whe ... Eidos Interactive Ancient Wars: Sparta for Windows, Mac, DOS

Monitor Blacks out 'input not supported'


I think the probelem is monitor resolution out of range . try the system resolution changes and connect the monitor then the issue is solved 80% or other problem is monitor hardware damages cheack the whole hardware components ... Acer AL1717 17" LCD Monitor

Gateway FPD1530 loses image shortly after powering up.


Try booting into safe mode. press F8 while the computer is booting. see if everything stays normal. It should tell you that it booted into safe mode. Once there, change the resolution or the frequency of the display(also known as the refresh rate) by ... Computer Monitors

Can you help me my computer says input signal out of range


This has to do with the refresh rate (hertz) of the monitor and whether the graphics card is capable of operating at that rate. So your graphics card is operating at a rate that is too high or too low for you monitor to receive. I've run into this wh ... PC Desktops

Can VP171s work with Windows 95?


... ViewSonic VP171s 17" LCD Monitor

Out of range


May ber it is screen resolution issue.When you power up the computer press F8 key then enter in enable vga mode.Then change screen resolution to 1024*768 then apply AND ok. ... Westinghouse L1975NW Monitor

Is this a problem?


Hi Viv,\015\012\015\012Hope this will give you hints. If you haven't noticed first day you bought and used it with this negligible glitches you mentioned. There are factors to test and consider; try adjusting resolution frequencies (lower ... Acer AL1716 17" LCD Monitor

Monitor out of range when a game is booted up


The maximum resolution for the MV540 is 1024X768 @60Hz refresh. The other monitor isn't giving you an error message because not all monitors have that feature, but both the monitors are unable to display whatever data the computer is sending. If the ... Compaq MV 540 15" CRT Monitor

Dell Inspiron 1000 laptop LCD screen blackout


I HAVE POSTED THE SOLUTION FOR THIS BEFORE. ON THE LEFT REAR THE SCREW FROM BOTTOM OF UNIT TO THE LCD. LOOK INSIDE WHERE THE TOP AND BOTTOM GO TOGETHER YOU WILL SEE A PIECE OF ALUMINUM TAPE IF IT STICKS OUT PAST THE BOSS TOWARD THE PC BOARD. WHEN YO ... Dell Inspiron 1000 Notebook

When I start my game, monitor goes black and out of range appears


If the monitor is ok with other games then the problem may be with the game you are trying to run. Sounds like the game is trying to run in a resolution the monitor is not happy with. Also what type of graphics card do you have? Is it capable of runn ... ViewSonic VX910 19" LCD Monitor

Monitor not displaying


Sounds like your video adapter settings have been wedged. If you are running Windows XP Service Pack 2, you can use the following steps.\015\012\015\0121) Boot the laptop into safe mode. Boot into safe mode with networking support if possible. This c ... Dell UltraSharp 1704FPT 17" Flat Panel LCD Monitor

I have a Westinghouse LCM-19v5 monitor. When I start the computer, after the startup screens, the monitor goes black and I get a red bar with the message "Out of Range." I am in safe mode right now, the only way that I could get the screen up.


In the safe mode you have to change the resoulution and the frequency to 60 hz you can get it by fright click on the screen and then choose properties and then choose settings and adjust the resolution to 1280 to 800 and then choose advanced then cho ... Westinghouse LCM-19v5 Monitor

Dell Inspiron 1525 Laptop..the screen goes almost black after 5 minutes.


The screen goes black while in normal mode right? So try to boot in safe mode (power on then keep tapping F8 then select safe mode). Check if still happens in safe mode.If screen does not goes black in safe mode it means there might be a ... Dell Inspiron 1525 Laptop

Black screen while laptop is still running!


Go HP's website and then go to their help and support section, under downloads (where you would normally go to get drivers) you can also get a BIOS upgrade or FLASH this will eliminate any BIOS problems. If that doesn't take care of it than perhaps y ... PC Laptops

Sony sdm-hs75p runs for 5 odd minutes then screen goes blank?


H_e_l_l_f_i_, Have you performed the flashlight test after the screen goes "BLANK" ?? No!! You will not find the "flashlight" test listed in the OWNERS manual!! The test is a quick evaluation of the STATE of the units "switch-mode-power-supply". Did ... Sony SDM-HS75P/S 17" LCD Monitor

HP Pavillion F1903 monitor flashes on and then screen goes black. I have read countless posts about backlight issues but I cannot see the screen with a bright flashlight. This happened some time ago and I was able to get it back on and then set the monitor to not go to sleep. The system restarted last night, thus shutting down the monitor and now it won't come back up again. It will flash on briefly and then go black and the blue power light is still lit. The brief flash is the actual desktop, n


Can you check the temp. of your CPU and GPU? If your GPU runs 80 grad C, you have a overheating problem. The problem is a damage to the MB by excessive heat produced by Nvidia GPU. The only way to fix this permanently is to take out the MB and reflo ... HP Pavilion F1903 19" Flat Panel LCD Monitor

Monitor area black


Please refer to the solution I just posted on the other problem posted in regard to this monitor.\015\012--- Unfortunately, X2Gen has declared ... X2Gen MG19MY 19" LCD Monitor

LG Monitor will go black, other programs still run fine


... Proview PS 909 (White) 19 in.CRT Conventional Monitor

ViewSonic VX922 monitor - black screen - green power light flashes


PLEASE read Carefully so here is a fix for the green blinking light ...the monitor is going into shutdown....protect mode......THIS is ...Only for the seasoned electronic service tech ......YOU NEED TO BE into Electronics ..or have electronic backgro ... ViewSonic VX922 19" Monitor Flat Panel
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.7979 seconds