Having problems with your E-Machines eMachines Desktop PC ?

Can't access emachines recovery partition

\015 I messed up my registry and had to reformat. I went to my recovery partition but could not use it. So I used my recovery dvd but the recovery manager was missing. So I just reinstall vista without any of the **** software that came with it. Now I don't mind not having any of that **** software on my computer but I don't like not having the recovery partition available. I thought that if I used the recovery dvd that would have restored the recovery partition but it didn't. I mean I can see my recovery partition but the emachine recovery console is missing so I can't access it. How do I get my recovery partition back. In other words how do I get my computer back to it's factory settings?\015

Answers :

I'm not sure if this helps you but have you tried using a restore point to restore to a previous state ?
This can solve a lot of problems and doesn't lose documents.
Repair Help & Product Troubleshooting for E-Machines eMachines Desktop PC

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Windows doesn't recognize recovery partition after os reinstall

The issue you are having involves using multiple systems,...If your emachine came with vistan and you installed xp, you voided your warranty status...However remove your dual boot and stick to vista if you wanna keep your restore partition working pr ... E-Machines eMachines Desktop PC

Emachines laptop XP setup cannot access HDD

Hi there.\015\012\015\012Now, turn on your friends laptop, and access the BIOS/Setup menu. Have a look through the options, find the one that says something like Boot Virus Protection. Disable it. You can't install any opera ... Gateway PC Laptops

Can't access emachines recovery partition

I'm not sure if this helps you but have you tried using a restore point to restore to a previous state ?This can solve a lot of problems and doesn't lose documents. ... E-Machines eMachines Desktop PC

1. My ideapad Y430 easy cam doesnot working after i reinstall windows vista ultimate. Not i cant use it for my password. 2. I also try to partition it into four but it doesnot support i can have only two partition. 3. i cant install Windows XP3 in this machin. plese halp me.

This is all I can offer in your situation.....one option is to..use the...Novo buttonThis button functions as a reset button; use with caution. Press the1. Novo button to enter the main interface of OneKey Recovery while thepo ... Lenovo 3000 Y410 Notebook

I have recently purchased an emachine EME627. It initially worked but now I cannot access the internet or any of the features. A message comes up stating that I need to make factory recovery discs but after four attempts it keeps freezing during the verification process.

Hi.\015\012\015\012\015\012Try first a recovery using the recovery partition. This is done choosing "System Recovery", or doing F11 on startup. The system will prompt "Preparing system recovery options" then the recovery procedure will start. ... E-Machines eMachines Desktop PC

I have a eMachines T3418 desktop, and like this post it crashed. I recovered using my Windows XP disk, which created a recovery partition and saved my files. Now I am up and operating with factory settings, but I don't know how to access my old files on the D: partition. PC Angel doesn't seem to have any Help or documentation. Does anyone know how to recover my personal data stored behind the PC Angel partition?

I also have an emachine that I have ran a recovery on..It gives you two options one is move your files two the recovery D partition and make a new copy of windows.. I can see the files inside the partition but can not access because of PC angel locks ... E-Machines W3107 (RBW3107) PC Desktop

Access IBM Button does nothing-- need it to start my comp up

Hi,The Access IBM button is F11. This lets you boot the recovery partition. It is possible the previous owner removed the recovery partition to regain the hard disk space it uses.If the recovery partition is gone, you can order the ... IBM ThinkPad R50e Notebook

My computer got broke so i installed new installion of windows xp and now that one got messed up and i need to restore the factory settings but i cant get the d2d erecovery to work can you help me my computer is an acer aspire one series mother board aoa150

Hi there !!Thank you for posting your question at FixYa.comYou have a partition on your hard drive that contains the backup\015\012image.If you can't see a drive D: or E: on "my computer" that means the\015\012partition is hid ... PC Laptops

I formated completelly hdd (acer 7720g) i want to to recreate pqservise in order to have d2d recovery(recovery management).i have the dvd recovery of factory settings but the dvds didnt manage to create the hidden partition and the d partition .there is only 1 partition (c) how can i acceess the original factory settings on my hdd. i need the recovery management.. thank you!

You cant access the recovery partition because you probably has deleted them accidentally. Try to delete all the partitions and use the recovery CDs that come with your computer, they could help.\015\012\015\012Good luck.\015\012 ... Acer Aspire 7720-6155 Notebook PC

I have an eMachine t3516 that I would like to restore back to factory settings. I understand there's a recovery management partition on the HDD. how do I access it?

To access the recovery partition, reboot the machine. when you reboot the machine you will see at the BIOS skip screen "PRESS F2 or DEL etc... for System Recovery". ... PC Desktops

Have typed ma product keybuh cant get access to ma desktop

If you are refering to the activation window of Vista Operating System, you need to enter the Product Key which should be available at the bottom of the Notebook and it should be of 25 digits in length and it contains both A ... HP Pavilion dv6000z Notebook

Emachine W3507----upgraded to windows vista----I want to do a full system restore

Most package systems like that will partition the hard drive and place the recovery image on the smaller partition of the drive. I don't know about this specific system/model, but I'd bet that is the case, and explains why you have no Recovery CD. ... E-Machines eMachines Desktop PC

Computer has frozen on windows logo

1) Which version of Windows ? For the following discussion I am assuming it is 2000, XP or higher. You may also want to print this, it's long.2) Is this this the low resolution Windows logo on the black scre ... Fujitsu Siemens SCALEO 600 (FSP:83C005617) PC Desktop

I have ibm G41 laptop i formatted my inbuilt os ...but i have to access that os and ibm access menu again recovery space is still in my harddisk but i cant access ibm acceess menu ...

Hi, \012During the boot at the THINKPAD SCREEN press the Thinkvantage key ( Blue button ) it will launch rescue and recovery and allow you to reboot factory. This only works if you did not corrupted/deleted the rescue and recovery hidden partition on ... IBM ThinkPad G41 Notebook

Bsod, error code:0x00000024, hdd problem booting xp os

Can you do this\015\012\015\012Boot from the Windows XP CD. Watch for a Press any key to boot from CD... message similar to the one shown above. Press a key to force the computer to boot from the Windows CD. If you do not pres ... Sony VAIO VGN-T170P/L Notebook

Recovery Hard Disk Access

Your recovery dics should not be a dvd, but a cd. look at all of your discs and make sure you are using the right one, if you cant find the right one call sony and ask them which one to use. ... Sony VAIO VGN-N130G/W Notebook

My nb205-n210 reciently underwent an unexpected crash... now the netbook will not boot in any mode. When trying to boot up in any form of safe mode it freezes the boot at "multi(0)disk(0)rdisk(0)partition(0)WINDOWSSystem32DriversMup.sys". My plan is to just "find zero" and start over. I cant even get into any form of ms-dos or ms-dos command prompt to be able to do that.

You will have to put a Windows DVD in and boot on that and do a "Repair" install, if that will not work, you will have to do a complete format and reinstall Windows.\015\012\015\012But try the below first if y ... Toshiba NB205-N310/BN Netbook

Cant access system recocery

If you can find the operating system disc you should try reinstalling that. If that is the disc you are missing you can borrow one from someone and still use the key that is taped to the side of the desktop.\015\012\015\012Insert the OS disc on ... Compaq Presario 5000 PC Desktop

000021a error I'm getting the 0000021a error. I'm rtying to reload the OS but it doesn't recognize the CD/ROM even though the order is correct to go to it first. Tried to boot in safe mode and it's telling me I have a video driver error. Seems like a lot more than just that.

If your system does not boot, is due a:1) Order Bios (Put Cd at the first place)\015\0122) The CD used is not a bootable CDAre you using a bootable cd?Assuming your system is set to boot from the CD-ROM drive ... Dell Dimension 4600 PC Desktop

Key fo starting recovery partion - E-Machines eMachines Desktop PC

Dont know what model you have. Do you have a recovery partition which is accessed using F10 or F11 key at startup, or from recovery disc which is used from the start menu recovery option? ... E-Machines eMachines Desktop PC

Cant do anything, I turn it on, get windows screen, next says windows restarting

With the hard drive removed power up the system and enter the CMOS setup utility. Make sure that it is working properly. If not then get an external monitor and plug it into the VGA port on your laptop. (should be D-shaped with 15 holes for pins). In ... Toshiba Satellite 5105-S701 (PS511U-02WYJX) PC Notebook

I've bought a Acer Aspire 5710 and want to reset to factory setting, however i don't have the eRecovery password, is there a way to reset this? i want to restore my laptop to factory default but i forgot my erecovery management password. can i reset it somehow?

Hi,I've run into that problem before. Luckily for me I had a set of OEM disks handy, but I'm guessing you are a little more limited in options ;) That's ok, it can be worked around.Do you still have access to the computer itse ... Acer Aspire 5720-4984 Notebook

System logging off as soon as i starts it. Please see details..

Looks like you've tried a lot. Try this stuff.1) Try F11 instead.2) Dunno. Corruption?3) chkdsk /f4) Microsoft EULAs are much less crackable than their software, according to BitTorrent. ... HP PC Desktops

Well my auntie has a packard bell computer setup on xp home edition and cant access it the problem is every time we go to switch it on it gets to the loading screen when it first switches on and then stops and jumps to a blue screen with instructions. I cant follow the instructions due to itnot been able to switch on i tried rebooting the system with an emachines recovery disc for any xp machine and yet nothing how can i solve it... ???rick

Press F8 during system startup repeatedly and see if a menu comes. If it comes then you will find a option named Safe Mode. Select it and press enter twice. \015\012Let me know if you can start your pc in safe mode or not ... Packard Bell PC Desktops

Installing vista I have an EMACHINE that came with vista home premium. On the hard drive, it has a partition D: and that had a bunch of stuff in there, when i was using the vista that came with it, it said that that part of the hard drive I could not access. So I just left it. Anyways, I have a copy of vista home premium without all the emachine software on it, when I load it, it installs fine, but then when the computer restarts it says that there is a problem. Now when I reboot with the vista

You never said what the problem was ,let me know \015\012also you may have system recovery software installed which would bring your computer back to factory settings\015\012whats the recorded problem\015\012who makes the computer ... PC Laptops
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4215 seconds