Having problems with your E-Machines eMachines Desktop PC ?

Need schematics for front panel , power sw , pwr led , hdd led et

\015 Need to know where to plug everything in on motherboard please help emachines w4065\015

Answers :

Try this link to Emachines page. After you put in the make and model and stuff you should be able to view the user manual for your machine. If this isn't what you need you are able to contact support from this page and maybe they can direct you to a more detailed explanation that may help more.
eMachines use specially-made\015\012boards for them so there is no manual as such as the boards aren't made\015\012to be distributed. Basically they would all use the same sort of\015\012connectors and blocks (and cases) to an extent that anybody can plug a\015\012connector into the right place and it will work.

The easy way to\015\012get round this is to find the power button first - try each two pin\015\012connector first, press the button and see if it comes on. If not, move\015\012along on the block until you find the right one. Then it's just a case\015\012of trial-and-error on the other ones to find reset, power LED and HDD\015\012led.

Repair Help & Product Troubleshooting for E-Machines eMachines Desktop PC

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Need where pwr sw and pwr led and hdd led plug onto au31 motherboard

FIC AU31 mb (a.k.a K7m-NF18G mb)Pin Configuration = PinoutThe Front plastic panel of the computer is the Front Panel.The area of pins on the motherboard that the cables (Wires) go to, is the Front Panel header.Front Panel head ... E-Machines T3092 PC Desktop

Emachines t3830 I need the schematic for MB I umployed the wire for the push bottom without looking at the way they were plug. Now I do not know the correct aligning of the push bottom wires.

If you look at the motherboard there is usually a diagram labeled "FRONT PANEL HDR" that will tell you which pins are for: HDD LED, PWR LED, RESET, PWR ON. etc. The chart / diagram may be a few inches away from front panel header.the fol ... E-Machines eMachines T3830 PC Desktop

Need schematics for front panel , power sw , pwr led , hdd led et

Try this link to Emachines page. After you put in the make and model and stuff you should be able to view the user manual for your machine. If this isn't what you need you are able to contact support from this page and maybe they can direct you to a ... E-Machines eMachines Desktop PC

Had to replace power switch on emachine computer need to know where wires go

I'd like you to look at this motherboard, and compare it to yours. It's an Intel Seabreeze T3 motherboard. My data states it was used in many computers, and the eMachines T3830 being one of them. ... E-Machines eMachines T3830 PC Desktop


Hi there\015\012The front panel connectors are\015\012 mainly,\015\012\015\012\015\012\015\012\015\012harddisk activity connector\015\012power switch connector\015\012 ... eMachines T6420 PC Desktop

Need to re-attach power button cable, hard drive

The manual for your computer is available from emachines, p.168 shows the info you need (replacing the front I/O panel)\015\012 ... E-Machines eMachines Desktop PC

I have a T2958 and toof the face off. Can you

EMachines doesn't give out this kind of info, and I don't have one in the shop. eMachines also had the habit, of using a few different manufacturer's of motherboards. Intel, TriGem, MSI, Asus,and FIC to name five. Plus eMachines wou ... E-Machines (T2958) PC Desktop

Configuring motherboard powerswitch leds reset

U will find front pannel connection pins on mother board. its in 2 lines. in onle row there is one pin slot idle. next to that vacant pin slot u insert reset sw, next to it insert hdd led, behind hdd led insert power led, next to power led (behind re ... Dell Dimension 2350 PC Desktop

Motherboard pin config

All motherboards have a print beside the pins, \015\012Speaker= "speak", \015\012"pwr s" =powerswitch, "HDDled" red light on front, rst = reset switch [not allways used] "pwr led" Green led, the case wires are usualy marked on the plug ends with th ... Systemax Ascent PC Desktop

Need a manual for a oct103 motherboard, know where I can find this???

Oh well, let me put this puppy into a solution then, and see if you'll be kind enough to rate it. :)Motherboard made October 10, 2003 for a Dell Dimension E521?\015\012 \015\012http://support.dell.com/support/edocs/systems/dim ... Dell Dimension E521 AMD Athlon 64 X2 Dual-Core 3600+ , 1 GB DDR2 SDRAM , 250 GB EIDE SATA H... PC Desktop

A power diagram for restoring power for a emachine

Hi there if you look real closley at the wires they are labled such as (pwr)led (reset) (hdd led ) (remote switch this the power for the computer) ect ect now look real closley and you will see the same markings on the edge of the board ... E-Machines eMachines Desktop PC

Front panel leads Emachine model T2862

E-machine model T2862 pin-out for the 10-pin front panel header is screen-printed on my Emachine's motherboard, but is so small and far away from the actual pin location, that it is likely being overlooked. If looking into the computer case from the ... PC Desktops

Optimized intel server board 2000 Need Diagram for

On most motherboards the front panel connections are printed in the connectors on the motherboard. When you connect the various LED indicators and when you power up and they do not light up then just switch the connectors around, because they are are ... Intel PC Desktops

I need a schematic for a d2823 desktop

Pwr (power) goes to the on/off switch (led) goes to the light (light emitting diode) hdd goes to the harddrive (hard drive device) ... E-Machines eMachines Desktop PC

I need help with all wires. How to connect them and where to connect on Asus Motherboard.

If you are referring to wire the front panel on the case (pc speaker, power button, light indicators, etc.).\015\012\015\012Then the illustration is defined on the motherboard's manual. If you can you give me the exact model of your asus motherboard ... XION (XON-001) ATX Mid-Tower Case

Where does the pwr sw plug go to on the motherboard

There is no way to tell you exactly where it goes without knowing the make and model of the motherboard. However all motherboard label the connection point on the board itself. What you are looking for is usually located in the lower right hand corne ... Gateway DX4200-09 PC Desktop

Reconnecting power swith, LED light for power and hard drives on emachine

Yes that is true if you look at your wires ahnd you will see that one says hdd and one says spkr and so on now look closley at the board and you will see the same thing on the moboard if you are not abloe to read it you should be able to go ... E-Machines eMachines Desktop PC

Proper pin numbers to install inserts in a Dell SATA 34 pin GX270 motherboard

Hi there.Get a strong flashlight and a magnifying glass (if you have one). On the motherboard look for the front panel, it should be\015\012marked PWR and coloured green, also the plug that connects to it should\015\012be marked PWR_SW. On some ... Dell OptiPlex GX270 PC Desktop

How do hook up front panel power switch to motherboard

The simple way is to remove the front panel of the computer trace the wires to the front panel leds, make note of color pair to each led. The using the manual that came with the motherboard locate the schematic for the JFP1 connector on the motherbo ... E-Machines eMachines Desktop PC

I can see the wire thats loose connecting my motherboard to the start button how do i fix this

It all depends where it's loose from. If it's loose from the motherboard you will need to open the case and locate the +PW- plug. Normally this is in the lower right hand corner of the motherboard where the other front panel wiring is attached. In f ... PC Desktops

Need manual to put wiring back correctly please ta muchly

This is MSI/Support and the download page for the MSI MS-7104 V1.0Motherboard Manual in Zip file form,http://www.msi.com/index.php?func=downloadfile&dno=4036&type=manualGranted, it's not the 2.0 ver ... PC Desktops

My t2862 powerlight will not come on but a green led comes on on the main board, nothing else happens. I also disconnected the pwr sw,hdd led and pwr led plugs and don't know which pins they go on. Thanks

On the front panel header where the wires connect, there are two rows of 5 pins. The top row actually has 4 pins with the end one missing, and the bottom row has 5 pins. The first two pins on the top row are for the power LED. The next two pins are f ... E-Machines T2862 PC Desktop

Need Diagram for the pwr,reset,pwr led,hdd led speaker connections on the motherboard. Model p5s 800-vm.

Hi there.On the motherboard look for the front panel, it should be\015\012marked PWR and coloured green, also the plug that connects to it should\015\012be marked PWR_SW.Have a look at these pictures for an idea >>>>>> ... ASUS PC Desktops


I don't see that this problem was solved. Adding additional information.The eMachines T6410 Desktop PC uses an MSI MS-7145 motherboard.(MicroStar International ), ... E-Machines eMachines Desktop PC

EMachines T3256 Desktop

Hi,\015\012\015\012Generaly, the little connectors on the printed side will face the bottom of the case. Also, typically, Black is negative, and white/colour is positive (except on the power sw, it doesn't matter). On the motherboard, w ... E-Machines Athlon XP 2200+ (rb-t2200-c67)
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 1.0093 seconds