Having problems with your E-Machines eMachines Desktop PC ?

Emachine monitor problem

\015 Emachine monitor suddenly says ''no input signal'' why?\015

Answers :

Ok so I have a emachine t4010 and the comps working and also the monitor says "monitor working check pc signal" its like they aren't meshing or something...
Your monitor is probably OK, it is the computer that probably has the issue.
\015\012On a great number of e-machines that I have worked on this is caused by the following:
\015\0121) Failed power supply unit. Swap with another of equal or greater power. Caused by failed capacitors in the power supply.
\015\0122) Failed capacitors on the motherboard. Look at all of the cylinder looking things on the mother board. If ANY of them have a bulged/raised top or are leaking fluids then you have bad caps( capacitors) and the motherboard is bad. Caps can be replaced by an experienced person. Caps should be perfectly flat. I have had several e-machines in the shop with this same problem.
\015\0123) Failed video card.
\015\0124) Failed processor.
\015\012What is most likely happening is that the computer is not passing the POST (Power-On-Self-Test) and therefore does not get to putting the video output to the monitor. When the monitor gets nothing from the computer it will display the message you are seeing. In a majority of e-machines that I have seen it is caused by bad caps on mobo and PSU.
\015\012If the machine is out of warranty then open the case and look at your motherboard (mobo), you may need a flashlight. If you could respond back and let us know if you have done this and if you have no bad caps, then what are you getting from the computer:
\015\012Fan turns on, CD lights briefly, Hard drive is spinning, etc. Also listen for beeps.
Repair Help & Product Troubleshooting for E-Machines eMachines Desktop PC

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Weird blink problem...

That's definitely a hardware (incompatiblity) problem. Download the most updated driver for the graphics card. Also see if there is a monitor driver for the monitor.I understand it worked seamlessly for the emachine but you should switch ... E-Machines eMachines Monitor E15T4

Icons and display immages are distorted. Adjustment sittings will not stay consistant even after following the troubleshooting instructions. The device is an Emachine with a windows xp application purchased new in the fall of 2009

Hiplease provide a few more details*system model number?*did you purchased a monitor with the system or are you using an old monitor. is it lcd (thin)? or CRT (big)?*what troubleshooting instructions did you follow? ... E-Machines eMachines Desktop PC

Emachine T2385 Won't Boot in Normal Mode past Windows XP Screen

The first thing I would check is your video card (usually driver) problem. Start windows in safemode with networking. If this problem has occured after updating the video card driver you may try rolling back the driver to a previous version, otherw ... E-Machines Celeron 2.3GHz (rb-t2385)

Emachine T3414 monitor

Turn off the computer and monitor. Disconnect the monitor. Turn on the monitor. You should get some indication the monitor is on, if not it is probably dead.\015\012\015\012If the monitor seems to be on, try to enter the menu by using ... E-Machines eMachines Desktop PC

Monitor reads: PC entering power saving mode then shuts off;PC on

First do not take the hard drive out and put it in another computer. It is configured to run in the computer it's in.\015\012\015\012Next, you probably did have a power surge either from your power supply or the power in your home. It s ... HP Pavilion a810n (PP164AA) PC Desktop

Emachines monitor goes black while CPU is still working

... E-Machines eMachines Monitor E15T4

Still having trouble with EMachines T3882

I feel your pain. I finally moved my pc to a room with no windows! But seriously, try a different monitor first. See if you can borrow someone's to just try it before you do anything else. If that borrowed monitor works fine, then you know what the p ... E-Machines eMachines Desktop PC


Does the monitor work on another computer? does the computer work with another monitor? I the answer is yes to both then here is the most likely solution\015\012you may have the screen resolution and/or the refresh rate set too high on the ema ... Rosewill 19" 12MS DVI R911E LCD Monitor

Monitor flicks off

If you have switched monitors and the problem persists, I would first look at your cabling, if you did not use the same cable on both monitors then the drivers would be suspect. Go to your video cards site and update the drivers after checking all yo ... E-Machines eMachines Desktop PC

Monitor I've had emachine for about a year with no problems then one day i turn on my computer and the picutre on the monitor is shaking and wont stop

Same thing is happening with my emchine as well. Mine is a T6412 series machine. I boought this machine a year and a half ago. Suddenly one morning the monitor started flickering. At first I thought may be some problem with the cables. I tried with ... E-Machines eMachines Monitor E15T4

E19T6W EMachine 19" monitor

Emachine is going to repair it under warranty.Tnx for the help.Bill ... BenQ FP91G+ 19" LCD Monitor

Emachine Monitor comes on a few minutes and cuts back off

I have the same problem and I think its the circuit board on the power on button and blue led. I unplug the board when the monitor is on and then the monitor stays on and works OK.\015\012It don't make any sence it is only 3 parts switch led co ... E-Machines eMachines Monitor E15T4

E-Machine T6216 PSU fan runs, computer will not boot

It is the power supply. EMachines have a long history of using cheap power supplies. I have replaced over a dozen EMachine power supplies with a 100% success rate. They are easy to replace and can be had for less than $20. Just write down the model n ... E-Machines eMachines Desktop PC

EMachine Help Hello,    Need Help w/ EMachine T6528 Motherboard/Power supply/video card! No Picture!! Was told that the Video card  was built in to the motherboard and the power supply fried the video card. Was told to buy a Newer and better video card to replace the old and the computer would recognize it and you disable the old one.. Problem is we can see nothin on the screen! What do we do to solve the problem?    Please Help...        Lost in technology..

If you took the pc in to a repair shop and they diagnosed that as the problem. You will have to install the new vieo adapter in the computer. Then plug in the monitor to see something on the screen. You can go into the bios to disable the other. N ... E-Machines T6528 PC Desktop

Lack of contrast and faded text

The Ultrasharp monitors need a good video card to drive the quality that you have come to know. The emachines lack the memory and quality to drive the monitor. If you don't have a 16meg video card with DVI, you will only get the basic analog qualit ... Dell UltraSharp 1907FP 19" LCD Monitor

Monitor menu the menu on the monitor to adjust the color and rotation and things like that pops up for no reason and goes crazy. sometimes it wont go off we have to shut the computer down. please help it is driving me crazy

I have the same problem with the emachines E14Te monitor. I have\015\012emailed emachines support several times and no responce. Iave tried\015\012calling, and vet the computerized maze of press the number for X\015\012department. I have yet to talk ... E-Machines eMachines Monitor E15T4

This is the same problem on the T6420 I am not sure how to add.

Your problem is the motherboard, it has blown. See my emachine support pages at:\015\012\015\012http://www.motherboardsrus.net \015\012\015\012and click on the text that says "emachine support" \015\012You can contact me by email on the website or by ... E-Machines eMachines Desktop PC

Monitor screen picture won't stay on for longer than a second

I had the same problem with my eMachine t3418. Site advisor Micromend suggested changing the power supply to more wattage. Very much recommend doing that. I did but it didn't fix the problem. Micromend also advised trying a video card. I bought ... E-Machines eMachines Monitor E15T4

Red has vanished from my monitor

Looks like your video card is having the problem then. Did you connect your monitor to another PC too? ... E-Machines eMachines Desktop PC

Emachine 17" lcd monitor from Best Buy

... E-Machines e15t 15" Flat Panel LCD Monitor

My emachines monitor has no picture, hard drive is functioning properly. Monitor is black

If you do not get a screen with a LCD monitor its likely you have a inverter problem or BACKLIGHT problem. you might need to replace the LCD backlight or replace the monitor on the desktop.\015\012check to see if the laptop can get a picture by ... PC Desktops

Emachine monitor problem

Ok so I have a emachine t4010 and the comps working and also the monitor says "monitor working check pc signal" its like they aren't meshing or something... ... E-Machines eMachines Desktop PC

EMachines E19T6W monitor turns itself off and on.

First off, I would check the monitor, if it is getting very warm, I would use a can of compressed air to blow the dust out (make sure it is unplugged first!). Second, I would check for any sort of interference in the vicinity (speakers are a huge cau ... Computer Monitors

Emachine beeps Hey, we just got a new emachine and we have the same problem! We got it mid/end of April but were in the process of moving so it stayed in the box till about a week ago. I hooked it up and when you press the on button it beeps 5 times then you hear the fan kick on like its thinking about starting up but then it just stops and beeps until you turn it off. The monitor says no signal and then goes blank. Any advise?

That would be a problem for e-machine. The beeps are codes. I will try to help, but it is hard to diagnose without looking at it.You can try several things. Open it up and make sure that everything is seated inside. Make sure the memo ... PC Desktops

BeNQ FP71E Monitor won't display desktop

The problem seems to be with the monitor.When there is no Display,if you power-off and on again do you get a Benq Startup screen?If not the problem should be dry solder on the Invertor board.Try tapping screen lightly,if it comes on the problem is dr ... BenQ FP71E 17" LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.6389 seconds