Having problems with your E-Machines eMachines Desktop PC ?

When I turn on my computer, nothing appears on monitor

\015 What might be the problem.\015\012\015\012when i press the power button the power suppluy fans turn on all the fans turn on all the lights turn on just nothing on the screen please if you have anything tell me i can realy use your help\015

Answers :

Somehow, if you've been messing with your computer, uv put static through the motherboard. This has ither damaged the processor or chipset, the chipset is the part that makes the usb, display and everything work.
\015\012Theres no way out of this except replacing the motherboard and processor. If you went inside your computer, you've obviously damaged something.
\015\012
\015\012Next time wear an antistatic wristband!
Hello,
\015\012
\015\012There are few troubleshooting steps you could try:
\015\012
\015\012>>First have you installed any new hardware to your system, if so remove it and boot system.
\015\012>>Also make sure your monitor is on and connected to the blue 15pin connector on the back of your system. Let us know if you need any more help.
\015\012
Repair Help & Product Troubleshooting for E-Machines eMachines Desktop PC

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Cannot get new Motherboard to boot up in Normal Mode


What u may have done is wwhen u were installing the new board, gave a static shock to the system...that will cause only the fans to come on and nothing more...this is a bad problem bc u cannot fix it...if u figure out something else is wrong, and it ... Gateway PC Desktops

My computer wont open windows


Step 1: Removing recently added hardware\015\012Use the steps in this section to disconnect any recently added hardware and test for the error. \015\012NOTE: If a new internal device (sound card, hard drive, or other) was ad ... Compaq Presario 5000 PC Desktop

Nothing on the screen after power on


Turn on the computer and complete the following steps:\015\012Step 1: Check cable connections\015\012(If you can see the initial HP or Compaq logo screen but later lose the picture, you can skip to Step 2.)\015\012check the video cable connection on ... HP Compaq FP 7317 17" Flat Panel LCD Monitor

How to turn off burn-in mode if botton on Monitor


I didn't have the monitor connected to the computer, and that's why the power button was unresponsive. After connecting it, the solution above worked for me.(My KVM switch was set to a computer that was turned off) ... Sceptre DCL9a

Computer won't turn on.


Hello!I have a Gateway 500GR and was experiencing all sorts of shut downs, no boots, fans run but no blue power button light and black monitor etc. Plugged in and unplugged this and that, it was driving me nuts! Finally this worked for me. Runnin ... Gateway GT5220 PC Desktop

Green light comes on for a few seconds then turns orange


Hello,If you have a popped cap then the mosfets are blown. They blow as soon as the cap shorts and pops. You need to replace both mosfets and the 220uf caps and test the fuse with a multimeter I would bet its blown too.Buddy ... Acer AL1916W 19" LCD Monitor

Black screen when turn on the computer


The problem could be a loose video cable/connector.\015\012Reseat the video cable or the connector that connects to the motherboard.\015\012To check if the video card is faulty, connect an external monitor to the video port on the HP, pow ... HP Pavilion dv1000 Notebook

Power button won't turn monitor off?


Alternative : Download Turn Off Monitor Utility from http://www.monitoroff.com ... Sharp LL173C 17" Flat Panel LCD Monitor

Monitor power light blinking on and off but no picture


... Dell E173FP 17" LCD Monitor

Green Power light blinking


Check the resolution in the Windows while connected to the old monitor. If greater than 1280 X 1024 and/or\015\012the refresh rate exceeds 75 Hz, the monitor may not respond. But you\015\012should at least see the BIOS splash when the computer is tur ... AOpen F70PS 17" Flat Panel LCD Monitor

Pc won't boot ...


It seems to be an issue of a loose Hard drive connection.. you can open up a tower and re-connect the cable. ... HP Compaq Presario SR2150NX PC Desktop

Monitor comes up shows "acer" then says no signal and goes black


The interface between the monitor and the cable might need replacement. Please check it. ... Acer AL2016 W 20" TFT LCD Monitor

No picture, monitor won't show anything black screen. Monitor was working fine put it on another computer and it won't show images. Could it be part of the power saving system? Is there a reset button?


Does the monitor show absolutely nothing, not even when first turned on? In that case maybe the cable could be defective or connected improperly, or the new computer might not be compatible (or set to output to, say, digital port, while you've got a ... Sharp LL T17A3-B 17" LCD Monitor

Laptop screen went out/bad


Hi falcon30, first thing I would suggest you do is plug the laptop into an external monitor to check that the graphics card/the laptop itself is functioning ok. \015\012\015\012All your need is a standard PC monitor with a VGA cable, plug the VGA cab ... HP Pavilion N5415 Notebook

Dell monitor keeps turning off...


Hello,The problem you are experiencing is quite common, however the solution can be expensive and frustrating if you are not sure what you are doing. The problem is due to usually 1 of 2 things but the result is the same. The result is that the ... Computer Monitors

Dell 1702FP 17" shows nothing after Radeon HD 2600 put in.


Is the card plugged into the (PCI/AGP) slot correctly? Did you disable the onboard video in the bios? Also be sure to check in windows device manager and check for the graphics card to appear there. ... Dell UltraSharp 1702FP 17" Flat Panel LCD Monitor

Screen Wiggles, CPU Shuts Self Off, Powers Up Very Slowly


#1 Sounds like a video card resolution setting problem. This can happen when the settings are too high for the monitor. What size is your monitor?\015\012\015\012#2 Sounds like hibernation. You can adjust the power settings if you right c ... Dell OptiPlex GX280 PC Desktop

Computer randomly fails to boot


How many video cards do you have installed? ... E-Machines eMachines Desktop PC

Gateway FPD2275W Monitor not working


Did you try the fuse. chances are the power supply is at fault but if the spike of voltage was sufficient enough it may have taken out the fuse first.\015\012Warning: If you dont feel comfortable around electronics Do Not Attempt to remove the ... Gateway FPD2275W LCD Monitor

Emonster 600 won't boot up


You should not loose any information seeing that all information is held on your hard drive. As for changing out the processor, it seems pretty intimidating but is rather simple. When you have the side of the computer removed and can see into th ... AMD eMachines Desktop System w/ 17'' CRT Display, 2.0 GHz Athlon 64 3000+ (W3400)

Massive series of problems with IBM Thinkpad


Probably itz either minor case of software corruption/improper ground/cpu fan..or major case of faulty or defective main board/ram/addon/daughter cards....plz do check the following as in order:..the Hardwa ... IBM ThinkPad R40 2897 Notebook

Monitor has no red in it


Hey Ya'll,Bad news. I have the same set up with the same problem and it's awful. The odd color of the monitor is due to a bad nVidia GeForce 6100 video card. You'll have to cough up the cash for another PCI graphics card. Also, the FP ... Gateway FPD1975W 19" LCD Monitor

The monitor turns off and on repeatedly.


There are lots of reasons why it can shutdown, but happerlly none should be serious. It may be that the B+ or Power supply is too high, look for a pot near the power supply and try turning it down a bit. Also the x-ray protection may be too high, loo ... ViewSonic VE710b 17" Flat Panel LCD Monitor

M8149 22" Apple ADC display Working perfectly one minute then went totally black.. no flashing lights on any buttons.. like it would be if it were not turned on... tried monitor on another ADC apple equipped computer.. same thing no flashes no lights...nothing...


This issue is can be caused by loose cable\015\012connections or a loose DVI graphics card in the computer. Check cable\015\012connections and verify there are no bent pins.\015\012Ensure that the DVI graphics card is securely connected i ... Apple Studio 17" Flat Panel LCD Monitor

When I turn on my computer, nothing appears on monitor


Somehow, if you've been messing with your computer, uv put static through the motherboard. This has ither damaged the processor or chipset, the chipset is the part that makes the usb, display and everything work. \015\012Theres no way out of th ... E-Machines eMachines Desktop PC
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.9854 seconds