Having problems with your E-Machines eMachines Desktop PC ?

My emachine moniter keeps on displaying self check , check your pc and signal cable , moniter is working.


Answers :

There is a problem with your video card / and or motherboard usually when you experience a problem like this.

Open the case, remove the video card from the motherboard, re-install it.

Let me know what happens and we'll go from there.
Repair Help & Product Troubleshooting for E-Machines eMachines Desktop PC

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My emachine moniter keeps on displaying self check , check your pc and signal cable , moniter is working.


There is a problem with your video card / and or motherboard usually when you experience a problem like this.Open the case, remove the video card from the motherboard, re-install it.Let me know what happens and we'll go from t ... E-Machines eMachines Desktop PC

Moniter keeps blinking analog and digital at the


This happens when your monitor cannot detect a VGA or Digital port, either on the monitor it self or at the video card. If you don't hook it up to anything at all and turn it on it will do this. \015\012\015\012Step #1 \015\012 ... Samsung Computer Monitors

Problem with the monitor


Hi,The three boxes represent the built-in diagnostics of the monitor. The letters G is green, B is blue and R is for red, the 3 color guns of the picture tube of your monitor. The words "Self Test" indicates that it is in diagnostic mode ... Compaq FS7550 17" CRT Monitor

Screen black My moniter was working fine, when I came back to it the screen was entirely black. I turned computer off and on and could hear the computer coming on but moniter screen still black


Take the post (power on self test) disconnect vga cable and connect power cable if monitor shows no signal check signal cable massage then monitor is ok fault is in cpu. open it and clean the dust \015\012by vaccum cleaner you will get the dis ... X2Gen MG19MY 19" LCD Monitor

Wont go to normal start up screen!!!


The screen that you're seeing is the self-test of the monitor, as it's already stated. It's commonly caused by having no signal coming from the computer to the monitor. You were advised to check the monitor cable, if you have already done that, then ... E-Machines eView 17f3 17" Flat CRT Monitor

OPEN A BACK COVER ON MONITER


Hi im josh try this solutions of mine.\015\012Monitor Problems:\015\012\015\012THE COMPUTERS SEEMS TO BE WORKING, BUT THE SCREEN IS BLANK.\015\012- Check the monitor if turned on.\015\012 ... SAMTRON 55V 15" CRT Monitor

Nothing on the screen at startup


If you cant get into the setup menu then I would think the monitor is defective,you did not state if you hooked up the monitor to a computer that has a vga port that works. ... LG 22" FLATRON LCD Monitor

Gateway 900g Hi I have a Gateway 900g monitor that does not work. All was fine working until one day it just stopped working. It wont switch on or anything. I think it may be the power supply board but I cant seem to find one anywhere and I read that you fix them. If so then how much would that cost and how do I go about it. Regards Adrian


I'm writing this using a recently repaired Gateway 900g. You may be correct about the power supply, as that was the problem on this unit. There was absolutely no response with this unit. No blue LED, no dim display. Nothing.\015\012\0 ... Microsoft ChiMei CMV938D 19" Widescreen LCD Monitor

Red light on power up. No image on monitor. Pc fans working.


On a computer mainboard there are usually a number of connecting pins right next to one another called RESET, POWER LED, HD LED etc.The power led often leads to the green LED next your power button to show that the juice is available and on. Th ... Aspire Red X-Cruiser Mid Tower ATX Case without Power Supply (CSASXCRUSRD)

LG 700E monitor's power LED blinking continueously, no display


The monitor is probably on protection.To start unplug monitor\015\012from power and from computer and test computer with different monitor\015\012to find out if it is monitor or computer fault.If it is computer fault and no vi ... LG 500LC Monitor

Lcd monitor power light flashing with no img. seems 2 be frozen


The display is in safe mode and you will need to reset the display to get the display out of the safe mode. There are 2 different model revisions. Please choose the method that will match your revision. Depending on the revision of the monitor, one ... Planar PL1910M (Black) 19 in. Flat Panel LCD Monitor

Monitor does not display desktop


I'm not sure that you in fact have a dell, but take a look at this link and see if it helps.Normally you should be able to use the osd (on scr ... Dell Dimension 2400 PC Desktop

Repositioning the screen makes the computer cut out. it seems to only work when the screen is tilted far back.


I agree with thgrtalex. I also think the Display Cable connector may have come loose.I will go further, and state that I think the flat 'ribbon' cable, (Display Cable), may have come loose in it's ZIF socket.The Di ... Compaq Presario 1700 Notebook

Monitor keeps blank even the power lLED is on green


If it's working fine in DOS, it can only be your display drivers for your operating system. What happes when you start in SAFE MODE? When you PC starts, keep pressing the F8 key, go to Safe Mode. If it works, bring the Resolution down to 800 X 600 an ... Philips Standard 104S 14" cRT Monitor

I have a hp m9150f pc and a sony wega sdtv, installed a s-viedo wire. need step by step instructions how to program, windows media center says set up tv signal, nothing I do seems to work. can you help me please


Step by step how to enable svideo / tv on your nvidia videocardPreparing the graphics card for TV Output.The\015\012first step in configuring your graphics card for TV output is to first\015\012identify what type of tv output ... PC Desktops

The test screen message keeps appearing on my Proview monitor.


... Proview PS 709 17 in.CRT Conventional Monitor

Samsung color monitor


This problem may arise from monitor as well as from cpu.\015\012First of all check it by unplugging the VGA monitor cable.\015\012This will display the "Check Signal Cable" depending on the model of the monitor. But a message will appear ... SAMTRON 55V 15" CRT Monitor

Why does my computer swith on but not boot up


Hi Garnedd!\015\012 \015\012First of all, it sounds like you've taken a lot of troubleshooting steps thus far. So thank you for providing the details of those steps. It helps greatly.\015\012 ... Compaq D51S 1.6GHz Desktop XP Computer

Message: check your PC and signal cable


That Means the Monitor Does Not Detect Your PC..Check The Video Cables And See If they Are Fully Connected ... Computer Monitors

Monitor keeps blank even the power lLED is on green


Try replacin a new display card. If it is fine working.ok\015\012If not try fixing for cold solder in the video section.\015\012I suggest video section according your report the light green LED lighted that shows the power section is doin ... Proview PL913S 19" Flat Panel LCD Monitor

Nvidia Vetro Geforce 6800GT on E510? Need help setting up max displays MD 219 dual displays


... Max Displays MD-219 (Gray) 19 in. Flat Panel LCD Monitor

I am trying to hook my Eee 1000HE netbook up to my hdtv. I have 15 pin RGB cable but it doesn't work. Followed TV (Visio) directions, but it doesn't work.


More information would be helpful - what operating system are you \015\012running - XP or Linux? are you getting no signal at all? or just a \015\012picture and no sound? or vice versa?. What settings did you try?\015\012\015\012In the ... ASUS Eee PC 1000HE Netbook

Monitor displays signal cable disconnected


Check if motherboards you connect the monitor into has a video signal frequency range that the monitor supports. ... Dell UltraScan P1110 21" CRT Monitor

Blank screen but sounds like computer is on


If the screen is blank,check your hardware ram that either it is properly connected or not.check ur display adopter either properly connected or support ur pc or not.\015\012\015\012You can disconnect the VGA cable of the monitor but keep ... Dell Dimension 3000 PC Desktop
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 1.2325 seconds