Having problems with your E-Machines eMachines Desktop PC ?

Crashed hard drive on emachines T5026

\015 My hard drive has crashed and I do not have recovery disks. Any suggestions on how I can recover without the disks? My computer will restart and ask which mode I want to restart in, and no matter what I choose it only goes to the emachines logo screen, and then freezes up there. But, because it does go to that point, I don't believe the damage is irreversible. I just need to know where to go from there. HELP please!!!\015

Answers :

Pardon me, but NO! The statement, "two things are responsible for booting up computer RAM and Hard Drive" is simply not true.

A hard drive crash COULD cause the symptoms you describe, but that is more indicative of a virus infection. When you say the XP reinstallation disk would not start it exactly how did you use that disk? Attempt to use the repair console? Boot directly from the disk? Attempt reinstallation of the whole operating system? If you attempted reinstallation, do you also have the specific drivers for all of the components E-Machines used when they built your computer (you will need at least some of them.)

Post again with some more details about how you used the reinstallation disk.
How do u know ur hard drive crashed , if u are sure then just rplace hard drive ur sys will be ok

other wise try changing RAM two things are responsible for booting up computer RAM and Hard Drive one is the culprit u can easily check
Repair Help & Product Troubleshooting for E-Machines eMachines Desktop PC

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Crashed hard drive on emachines T5026

Pardon me, but NO! The statement, "two things are responsible for booting up computer RAM and Hard Drive" is simply not true.A hard drive crash COULD cause the symptoms you describe, but that is more indicative of a virus infection. Whe ... E-Machines eMachines Desktop PC

Emachine T5026 installing a new hard drive.

Where can i get a manual for my T5026 emachines ... E-Machines eMachines Desktop PC

Service pack3 crashed puter - after reinstall machine thinks extra hard drive is a disk drive.

You can get to the BIOS by hitting DEL or F2 at start up.\015\012\015\012However, that does not have anything to do with a drive letter.\015\012\015\012Drive letter designation is set in\015\012START>SETTINGS>CONT ... E-Machines eMachines Desktop PC

EMachine T3025/Best Buy

Get simple windows xp you just have to format deep with emachines as ntfs ive ran windows complete programs on emachines with out a problem and created straight recovery disk simple to be ran in windows safemode\015\012now your hard drive ... PC Desktops

Emachine T1840 the hard drive WD400 40GB problem Ask me to Format

Try this software it is free to try and then if you see it recovered your data you can buy it in order to actually save it off...\015\012\015\012http://www.runtime.org/gdbnt.zip\015\012\015\012Hope this helps ... PC Desktops

My laptop crashed and I want to restore to factory settings and I dont have a cd how can I do it

1) In some cases, you can buy the recovery media from the manufacturer. https://secure.tx.acer.com/RCDB/Main.aspx?brand=emachines(needs your serial number and often is restricted to purchase during the initial warranty period) ... eMachines E620-5885 Notebook

Emachine t5026 on and right off

Hi maybe you could try these steps I'm always doing when I experience the same problem as yours. This is only according to my experience fixing desktop computers.1. Try to disconnect all the connection at the back of your computer tower t ... PC Desktops

EMachines T1840 mother board crash

If its the same model yes it will work, if not then depends its got to to be the same bios, same chip and same chipset. ... HP Compaq nx7010 Notebook

Emachine t5026 boots only with os disk in drive

Emachines don't use the cable select properties very well. Change your drive to Master, reformat and reinstall the operatiing system. ... E-Machines (T2958) PC Desktop

Emachine crash we had a power outage and my pc will not even allow us to go to the boot screen. The hard drive is making a beep every 2 seconds. Is the hd dead? Thanks a million! Lee

Yes, with that beeping sound that you're hearing from your hard drive is a sign of a bad hard drive , that's also the reason why the computer wont even boot because the hard drive is already bad, the best thing that you can do here is to get a new ha ... E-Machines eMachines Desktop PC

Emachine W6409 will no longer turn on

Your hard drive is probably crashing or has crashed. You need to start your computer with an XP CD and try to use the repair function. You'll be able to tell if the hard drive is still working or not once you run the repair function. Let me know w ... E-Machines W6409 (7234) PC Desktop

I have a Emachine desktop T6216 computer, that when i turn it on the fan comes on for about 5 seconds shuts off and power-up. Now when i turn it on the fan just runs and it doesn't power-up orupload

It is possible that the hard drive has crashed. If the power supply starts up but nothing else then it is either the mother board or the hard drive. If you take off the case and the CPU fan is spinning, then it is likely the hard drive. Your best bet ... PC Desktops

Need to replace hard drive on T2778 Emachine.

I have the computer up and running thanks to your help. I had trouble with the internet connection but figured out I had to replace the modem. I am typing this message from the computer. I am so glad I found this website. THANKS! I maybe using i ... PC Desktops

Stuck on the setup menu

Hello,The error stating failure Disk 0 means your hard drive has died. It sounds like your hard drive crashed and is not seen by your PC, you will need to have it replaced.Buddy ... E-Machines T1100 PC Desktop

Emachines t5212 system restore backup files, please help!!

Hello, If you only your files to be copied in the other or any storage disk then you can remove the hard disk of your machine and then attached it to the other functional machine. in there you can browse and copy all the important files ... E-Machines eMachines Desktop PC

After installing hard drive, monitor, keyboard, mouse not working

Have you tried to enter BIOS? Are you able to enter BIOS?? There may be an option you have to hit to enable SATA, and to select the boot device order, which may be messing things up.Also, remember that STATIC ELECTRICITY is your enemy! Groun ... E-Machines eMachines Desktop PC

E-machines T5026 comes on goes only to the "e" screen

Some bios use F5 for a one time boot sequence. If lucky you'll get this option to choose cd rom as first boot device. \015\012You can remove the Cmos battery for about 3 min. It is the small round watch looking type battery on the motherboard. ... E-Machines eMachines Desktop PC

Pre-installed programs destroyed in a hard drive

TRY going to download.com.. i had the same problem with an emachine and i got all the drivers for chipsets and controllers, sure give it a go you have nothing to lose...good luck... ... Packard Bell iMedia 6826 (P481000502) PC Desktop

A problem wih my PC models T2642

It seems as if your windows or hard drive crashed!!!. If you have important data you will need to take it to a technician to retreive the information. Ok here is what you can do to attempt to fix the error. No matter which version of wind ... E-Machines eMachines Desktop PC

Emachine t3092, no video, can't find certain desktop files

If they're not on the drive, they're not on the drive. Your only other option is to search the free disk space for the remainder of those files. For that you can use the free trial of ... E-Machines eMachines Desktop PC

I dont have ethernet drivers.

Cambie mi emachines de vista a xp es 1161-05 y no me puedo conectar ainternet ... E-Machines T6420 PC Desktop

T5026 crashed ... i think.. no cds

The first entry.... where you can set the time but also detect the hard drive.... make sure it is set to auto detect.... also is the drive shown as master or slave and it will tell you the brand and model number if it detects it.\015\012\ ... E-Machines eMachines Desktop PC


You have provided some good information, but more detail is needed.Is the system still under warranty? How long ago did this start? Have you added any new hardware or software?Your reboot issue might not be hard drive or MBR ... E-Machines eMachines Desktop PC


Hi!\015\012we'll do some basic troubleshooting here!\015\012okay, try to relax dont panic stay calm and stay focus we'll do it step by step.\015\0121. open your CPU (be sure to unplug it and loose it from any power connections) ... E-Machines eMachines Desktop PC

My pc was doing this but now it's doing something different but simular

Try this: boot into the bios, set the boot order to cd rom first,hard drive 2nd and either one to 3rd. Hit F10 to save changes & exit. Put in your Windows cd. It should come up to a screen that says "Hit any key to boot to cd", do that. Set up sh ... E-Machines eMachines T3830 PC Desktop
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5439 seconds