Having problems with your E-Machines 19" Widescreen Flat Panel TFT LCD HD Monitor ?

My monitor doesnt turn on it works real quick then goes to a black screen


Answers :

Bad caps with bulging top will eb the first thing to look for, post back what you see inside so we can guide you further, see example of failed monitors due to bad caps: http://s807.photobucket.com/home/budm/allalbums
Repair Help & Product Troubleshooting for E-Machines 19" Widescreen Flat Panel TFT LCD HD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Gateway monitor FPD1975W won't display


Same problem - unplug both computer and monitor - hold power button for monitor for 15-30 seconds...then power it back on and then power on the computer. Seems from other sites there is a power issue with the monitor - this worked for me. ... Gateway FPD1975W 19" LCD Monitor

Philips 190S monitor - Urgent!


The lcd has three parts the screen plate(windows)/the logic(vga)/the inverter(power plug). Parts that go are the backlight ccfl's, behind the plate, and parts of the inverter, ie capacitors, all three take a bit of power from the inverter. The self t ... Philips 190P6EB 19" LCD Monitor

Screen stays blank


I'm seeing the same problem as the original poster. that delaying the power-on helps, seems to be related to the video mode - it fails in the vga text mode the bios boots up with, but works fine with the later activated graphics mode. switching to te ... iiyama Vision Master Pro 450 Monitor

Power but no picture


Try to re-solder the inverter part of the board. You may recognize that part where the 4 connectors from the backlight tubes can be found.... usually the small transformators (sorry, my technical English is not good) have bad soldering eyes after lon ... BenQ FP71E 17" LCD Monitor

Monitor goes blank less than a second after turning on.


If you put bright light at an angle close to lcd can you see a windows shadow, text icons etc, ie still logic power passing,then .... (from a.n. other) after two weeks searching I finally find doctor living stone http://www.aplusperfect.com/articles/ ... Dell E176FP 17" LCD Monitor

ACER AL1914 LCD Monitor goes black but green light stays on


The monitor is doing a self test a finding an error.\015\012The lcd has three parts, the screen plate(windows)/the logic(vga)/the\015\012inverter(power plug). Parts that go are the backlight ccfl's, behind\015\012the plate, and parts of the inv ... Acer AL1914 19" LCD Monitor

Black screen when turn on the computer


The problem could be a loose video cable/connector.\015\012Reseat the video cable or the connector that connects to the motherboard.\015\012To check if the video card is faulty, connect an external monitor to the video port on the HP, pow ... HP Pavilion dv1000 Notebook

Samsung SyncMaster 215tw screen goes black after about 1 sec.


I have the same problem its defenitly a problem with the lcd monitor not with the graphics card nor the pc. I hooked up the digital and afterwards the vga connection both had the same result. 1 s perfect screen all visible but than black. pushing the ... Samsung 215TW SyncMaster 21" LCD Monitor

Green light comes on for a few seconds then turns orange


Hello,If you have a popped cap then the mosfets are blown. They blow as soon as the cap shorts and pops. You need to replace both mosfets and the 220uf caps and test the fuse with a multimeter I would bet its blown too.Buddy ... Acer AL1916W 19" LCD Monitor

Vostro 1000 black screen an i can hear it running, but can see..


A blank screen with evidence that the motherboard is working (the Capital "A" green light is probably the CAPS LOCK on your computer's keyboard) initially points to an output or video problem. One quick way to see if that is the case is if you conne ... Dell Vostro 1000 Notebook

Lenova T60: Screen went pink during start-up for a couple of weeks then quickly goes black a few minutes after boot. Attempted in safe mode with the same result. You can see outlines of windows once it goes black but that is about it. Suspect it is the back light. Can you help?


Hello and thank you for using Fixya's services. I have a couple of questions and some troubleshooting tips for you:Questions: Is the splash screen coming on at all? Any picture or text right when you boot up? What Window ... Lenovo ThinkPad T60 8742 Notebook

When I turn on my computer it begins the boot then goes black


Try booting into safe mode. That will disable all drivers and use generic windows drivers to send commands to the devices. If that still doesnt work, id say that there is a problem with your OS installation. Backup your files using an external harddr ... Dell Latitude D600 Laptop Computer - Intel Pentium M 725 1.60GHz, 802.11b Wireless, 512M PC Notebook

Monitor goes blank less than a second after turning on.


I start my computer and turn it on, and everything looks fine for about 1/4 of a second and then it goes black while leaving the power light green. I can only see the screen again after turning it off and on, but that's only for another 1/4 second. W ... Rosewill R700J 17" Flat Panel LCD Monitor

When I turn my computer on the monitor stays off. I press the monitor's power button and the orange light above it goes off, obviously turning it off. I press it again and the light turns blue, the words "Analog Power Saving Mode" coming up on the screen. A few seconds after, the screen goes black and the light turns orange again.


Or just plug the video lead into the onboard connection (vga) if that doesnt work try hitting f1 when your pc is loading as sometimes the bios may be set to run in pci (graphics card) but will tell you at startup to press f1 to continue but you wont ... LG Flatron L1750S 17" LCD Monitor

My hp compaq nc6400 doesn't turn on. the green


Laptop is dead. How to troubleshoot the problem.\015\012In this post I’ll explain h ... HP Compaq nc6400 Notebook

Fujitsu c series labtop screen goes blank, the hooked up to a monitor, starts to work then says out of frequence and goes blank


The video resolution and/or frequency that's set in windows is not supported by the monitor you have plugged in. Restart the PC in VGA mode (hit F8 after the BIOS messages but before any Windows messages) and change the video settings to something ba ... Fujitsu LifeBook C6555 Notebook

Acer AL1917W goes black


I have recently opened my AL1917 (not wide) but it should work the same. First remove the stand. This is done by removing the plastic cover over the stand hinge (which appears to be part of the back cover, but is'nt.) Mine was done with simple tum ... Acer AL1917W LCD Monitor

Monitor turns on but after a while goes dark. Green power light is still on but no image. turn off and back on and image flashes then dark again


Nyecop, Sorry to hear that your LCD panel has been struck down with the BLACK SCREEN OF DEATH that is running rampant on the planet. YES, it can be repaired(refurbished). The cheapest method is that a lot of owners are doing it themselves if they are ... Acer AL1715 17" LCD Monitor

My monitor doesnt turn on it works real quick then goes to a black screen


Bad caps with bulging top will eb the first thing to look for, post back what you see inside so we can guide you further, see example of failed monitors due to bad caps: ... E-Machines 19" Widescreen Flat Panel TFT LCD HD Monitor

Dead pixel I have a black spot on the bottom right corner of the screen..can it be repaired?


\015\012Please read the WHOLE of this guide before starting.\015\012Software Method\015\012\015\012Try running pixel fixing software. Stuck pixels can often be re-energized by rapidly turning them ... HP Compaq WF1907 Monitor

Monitor stuck on black, menu buttons not responding


It's sort of a solution, but I work in a computer shop and got this screen in yesterday. I looked at it closely and it's actually the backlight that died. I pulled it apart and found that three of the 820uF/20V capacitors had swollen up. If you repla ... Samsung SyncMaster 740N 17" LCD Monitor

Screen goes black after 30 mins of working.


There are a few things you need to check here.1. It could be that your computer power management is set to turn your monitor and harddrive off after 30 to 45 min.If the computer is however working for 30 to 45 min while you doing st ... Dell Dimension 5100 (D51L1) PC Desktop

Monitor Randomly Turns Black


I have exactly the same problem with my Benq FP71E+ ..\015\012\015\012What i found is a temp fix is this :\015\012\015\012When monitor dims and goes black i turn it off , hit the bottom left side (near the BENQ logo) turn it o ... BenQ FP71E 17" LCD Monitor

Screen goes blank


Normal\015\012 0\015\012 \015\012 \015\012 false\015\012 false\015\012 false\015\012 \015\012 \015\012 \015\012 \015\012 \015\012 \015\012 \015\012 MicrosoftInternetExplorer4\015\012 \015\012\015\012 \015\012 \015\012\015\012\015\0 ... Dell E173FP 17" LCD Flat Panel Monitor

When i turn on my computer my lgw2242t monitor say's analog and then goes black. However the blue power light stays on.what could be causing this?


Hi!Not sure if this is your problem, but check the following:\015\012\015\012Is your monitor connected to your PC with a DVI cable?\015\012It will look like this:\015\012 ... Computer Monitors
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 1.3857 seconds