Having problems with your Dell XPS M1210 Notebook ?

The computer wont boot up. and the screen wont display anything!

\015 The computer wont boot up. and the screen wont display anything.whats wrong?\015

Answers :

Take a multimeter and verify the AC adapter. If it is ok, remove the battery. When you push the power on button do you have any activity ? If there is no activity the motherboard is defective. If you have some activity (leds on, fan activity etc.) :
\015\0121. check the memory :
\015\012- if you have 2 memory modules use only one at a time, the other one could be defective or
\015\012- check your memory with another laptop or
\015\012- use some known good memory etc.
\015\012 If the memory is ok then :
\015\0122. Connect an external monitor to your laptop. Turn the laptop on and see if you get any video signal on the external monitor (you have to use the right button combination e.g. Fn + one of the Function keys). If you get a signal then the problem comes from the screen/backlight/inverter/cable. If there is no video signal on the external monitor then most probably the motherboard is defective (at least the integrated video card). Expensive to fix or to replace it. Have it checked by a professional.
\015\012Do you have any warranty on your laptop? See your dealer or HP representative first.
Windows Start-up Errors
\015\012Step one, you need a Windows XP CD. If you only have a recovery disk set like the ones from HP or Compaq they will not do what you need done. Under normal circumstances however, you can use a Dell disk because the Operating system is on a stand-alone disk. All retail versions are also acceptable as well as upgrade disks. For a rule of thumb, if the disk has the Microsoft hologram it should work. You can order a boot up floppy disk from here: http://support.microsoft.com/kb/310994 with this file, if you know how, you can use “ImageBurn” to burn the file into an ISO file which can be burned to a disk. Now make sure your computer boots to the cd rom first. If you know how to do this skip on down, if you don’t, while the computer is first starting up and you see the manufacturers splash screen, tap F12 (some computers it’s F9, others it may be another key, you may have to watch and see if the computer lists the key strokes for getting to the boot menu. If you still cannot find it, boot into the BIOS settings and change your boot order there. Save your settings and exit, the computer will now seek the cd rom as its boot source first.
\015\012Place your Windows disk in the computer and start it up. When you see the test at the top of the page “Press Any Key To Boot From CD” Just hit the space bar to activate. The next screen you will see will most likely be a Windows setup screen, when you see this press the “R” key to get to the recovery console. It will get there, it may take a little time, patience. Once it loads you will be given a choice of Windows installations, there should only be one, if there are more, always pick number one. It may ask for an administrators password, if you have not set this particular password, then just leave it blank and press enter. The next prompt you see is:
\015\012You need to type the following:
\015\012cd \\
\015\012hit enter. Pay close attention to the spacing between the characters. There is a space between the character “d” and the “\\”
\015\012You are now at the ROOT of the drive, this is where basic commands can be given and changed. You should now see the following:
\015\012Now type the following:
\015\012CHKDSK /R
\015\012Hit the enter key.
\015\012The chkdsk /r command also includes the P command and will also look for lost recoverable information in bad sectors.
\015\012There are occasions depending on how corrupt the system is, that this process could take several hours, so be patient with it.
\015\012Now, after chkdsk has run type the following:
\015\012Hit the enter key.
\015\012It may prompt you with a warning, that’s ok, just continue. When fixboot has finished, type: EXIT hit enter and windows will reboot. When the system reboots, tap the F8 key during this time and you will see the multi-boot menu come up. Scroll to the title “Last Know Good Configuration” and hit the enter key. If you were having some simple drive errors this should have fixed them.
Repair Help & Product Troubleshooting for Dell XPS M1210 Notebook

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Massive series of problems with IBM Thinkpad

Probably itz either minor case of software corruption/improper ground/cpu fan..or major case of faulty or defective main board/ram/addon/daughter cards....plz do check the following as in order:..the Hardwa ... IBM ThinkPad R40 2897 Notebook

My computer wont boot up the fan and light turn on for a second then goes right off....

Follow these steps to determine why your computer won't turn on.\015\012\015\012Computer shows no sign of power ... HP Pavilion dv9000z Notebook

The computer wont boot up. and the screen wont display anything!

Take a multimeter and verify the AC adapter. If it is ok, remove the battery. When you push the power on button do you have any activity ? If there is no activity the motherboard is defective. If you have some activity (leds on, fan activity etc.) : ... Dell XPS M1210 Notebook

How to reinstall windows xp if files are missing??

CLEAN INSTALLATIONNOTE: Before proceeding, make sure all necessary backups are completed.* Insert the Windows XP Reinstallation CD into the top CD drive* Remove any external devices from the computer: (except the mouse & ... Gateway 310 Series (158920) PC Desktop

Windows wont start!

To fix windows won't start problem, follow the tutorial:\012http://www.windowspasswordsrecovery.com/fix-windows/windows-wont-sta ... Dell Dimension 3000 PC Desktop

HP Pavilion DV2036e Wont Boot

Similar cases,,,,,,,,won't boot,,,,,1.) if with black display; please check your ram memory, if you have 2 take out it all and replace it one by one, try to boot one at a time,,2.) if with black display and the pan start functioning maybe your cpu is ... HP Pavillion ZV6000 Notebook

Screen wont light up, cannot see the screen.

I Have a brand new Pro book 470 G1, worked fine for a few days now it still boots up fine but nothing on my screen at all ... HP Pavilion dv7-1130us laptop

It wont power on. The power light comes on but

Try these troubleshooting tips, they may help.\015\012\015\012Power is on, but nobody is home….\015\012\015\012This is a common problem I see a lot and there can be multiple problems here. First off, if you have lost th ... Toshiba Satellite L45-S7423 Notebook

I have an Acer Aspire 5735 RAM

If computer is booting, connect the laptop to an external display , and start it up. If you have display in there , then the problem is a faulty inverter.\015\012\015\012If you have no display, then the most common fault is the motherboard.\015 ... Acer Aspire 5735 Notebook

The laptop wont start, just getting blue screen

If you are getting a Blue screen repeatedly and you can't start up towindows in any custom setting ( from f8 start up menu ) one way tosolve the problem is to Use the restore disc or windows installation cdor dvd to installwindows into the computer o ... Acer Aspire 5050 5430 Laptop

710m Fails Power On

Hello,This can be caused by a few different reasons.1. Does your CD/DVD drive open when you push the eject button? No? Maybe the drive is bad and your computer is setup to boot from this drive first so it just sits there wait ... Dell Inspiron 710m Notebook

Floppy drive my BIO's? and if you mean going to right click on mycomputer and clicking hardware then device manager and disableing and inabling my floppy drive, then in that case you didnt read my post cuz i done said i have done that. read S..L..O..W..E..R next time, sorry if sounding mean but i have been gettin the run around on this thing for 3 months. Everyone keeps telling me to do stuff that i have done,done. I have even tryed to get the computer to reconize it by going to start / run and

You're talking about My PC and device manager and I'm talking about Bios.\015\012The BIOS (stands for Basic Input/Output System) is system software inside your com ... PC Desktops

Wont boot fully

Try resetting the system BIOS.There are three ways to do this, depending on the mainboard style.Check for a jumper near the mainboard battery.If there is one, and it is a three pin style, move the jumper from the side it is on ... IBM eServer xSeries 346

Display went black and now computer will not do anything

I need default password for ibm thin kpad lenovo r51.i tryed to crack or to bypass password but i can't i need help pleaze ... IBM ThinkPad R51 Notebook

The notebook tries to boot upon power up but simply shows the Windows XP screen scrolling by and does nothing else . .

The windows on your computer is cleary corrupt and no longer able to start up.one way to solve the problem is to Use the restore discs or windows installation cd or dvd to install\015\012windows into the computer or perform a repair insta ... PC Desktops

Computer has frozen on windows logo

1) Which version of Windows ? For the following discussion I am assuming it is 2000, XP or higher. You may also want to print this, it's long.2) Is this this the low resolution Windows logo on the black scre ... Fujitsu Siemens SCALEO 600 (FSP:83C005617) PC Desktop

After booting, windows comes up, the background photo comes up but I have no desktop. I have task manager, but that is all.

Okay try this, in task manager, click file and then new task (run..) write: explorer.exesee if the computer works normally, if it doesn't. then you need to do a repair install, when you do a repair install you won't lose your files but pr ... PC Desktops

The graphic software failed. no display - HP Pavilion dv6000z Notebook

When you turn the computer on, do you see the HP logo? \015\012\015\012If you don't, keep the computer on and try holding the computer screen under an overhead light at an angle. If you see a faint image of anything on your monitor, then ... HP Pavilion dv6000z Notebook

Missing NTLDR file

The first thing to do is try to change back whatever hardware or software change you just made (this could be as simple as leaving a floppy disk in the drive or you need to reseat the IDE cables). If the contents of the drive are especially important ... ASUS Eee PC 2G Surf Notebook

Unit wont start, gray screen then goes to a screen with options on how to start unit and then goes blank

Answer:To load the last known good configuration in Windows\015\0122000 / XP reboot the computer and as it's booting booting press and\015\012hold your "F8 Key" which should bring up the "Windows Advanced Options\015\012Menu" as shown below. Use your ... NEC Versa VX Notebook

Ntldr is missing, this information is regularly coming even though I am trying to format my laptop acer 4715z with cd also when once it was it catched booting and started the process of formating after a few steps ahead it showed me that no hardware is available , kindly tell me what to do? now it is not booting with the cd which button or setting is required to solve the problem and able to format my laptop

1. You must have a copy of "ntldrusb.zip" file.USB: Right click the ntldrusb.zip file and choose "Extract All" Next>Next>FinishThen Insert your USB Stick into the working computer (remove any other USB sticks, and be sure there isn't anyt ... Acer Aspire 5610-4648 Notebook


If you have changed the power unit and the computer is still not powering up, then it is quite likely there is a motherboard fault - probably in the power management circuitry, which expects the power_good signal from the power unit at a precise mome ... Gateway GT4010 (RBGT4010) PC Desktop

Cannot reinstall Windows XP pro to my hard drive which had it alr

I have found 2 websites taht can help you somewhat:\015\0121) this is the one with the steps that can help you, ... E-Machines eMachines Desktop PC

Want to load Win XP on my Acer 4720z laptop - Acer Aspire 4720 Notebook

Step 1 - Start your PC and place your Windows XP CD in your CD/DVD-ROM drive. Your PC should automatically detect the CD and you will get a message saying "Press any key to boot from CD". Soon as computer starts booting from the CD.\015\ ... Acer Aspire 4720 Notebook

Cannot get new Motherboard to boot up in Normal Mode

What u may have done is wwhen u were installing the new board, gave a static shock to the system...that will cause only the fans to come on and nothing more...this is a bad problem bc u cannot fix it...if u figure out something else is wrong, and it ... Gateway PC Desktops
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.8746 seconds