Having problems with your Dell UltraSharp 1907FP 19" LCD Monitor ?

The power switch does not switch (no click)

\015 I turned it off, and it did not turn back on. There is no click in the power switch, but there is in all of the other adjustment switches\015

Answers :

The problem is the button works on a plastic strip that acts as a spring this has snapped and needs replacing you can prize the bezel off all round the screen and access the little circuit board then using a very small screwdriver access the switches and operate the little push button
Unplug the monitor from the power
\015\012Unplug the monitor from the computer
\015\012Plug the monitor back in.
\015\012Try turning it on.
\015\012
\015\012DOES IT SAY "NO SOUCRE DETECTED" or soemthing like that???
\015\012
\015\012if it DOESN'T it means there is something wrong with the computer.
\015\012
\015\012if it DOES:
\015\012
\015\012plug it back on to the computer, turn the computer power off.
\015\012Press and hold the power button on the computer for about 15 seconds.
\015\012Plug the computer back on.
\015\012Try turning the computer on.
\015\012if it's not turning on again there a problem either with your monitor cable, or the plug, or the video card plug. It is unlikely that your video card is broken if you hear no wired series of short and long beeps when you try turning the computer on.
\015\012Good luck.
\015\012Give us updates if you need more assistance
Repair Help & Product Troubleshooting for Dell UltraSharp 1907FP 19" LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Pinout on t6410 gATEWAY CONNECTING POWER BUTTON


I don't see that this problem was solved. Adding additional information.The eMachines T6410 Desktop PC uses an MSI MS-7145 motherboard.(MicroStar International ), ... E-Machines eMachines Desktop PC

I accedentally knocked the power wires off inside the big box i cant think of the name on my emachine w3507 how do i put back together


Power On switch, (Button), wires from the front panel that go to the motherboard? I could really use the name of the motherboard, to try to get you this information. I don't have an eMachines W3057 sitting in front of me, at the mom ... eMachines W3507 PC Desktop

Computer in black screen, no energy outputted


A few possibilities(the only problem is if you never get any display to try many of these suggestions):\015\012\015\012-Suspend. With suspend, everything is put to RAM and the computer goes to low power state, shutting off USB, HD, and most other thi ... E-Machines eMachines T3830 PC Desktop

I was unable to power up my 8250 and I have oirdered a new power supply. Is this difficult to install and is there a set process to follow?


Not difficult at all.1) Work on a table. Computer unplugged from power, computer case open. TOUCH the metal frame of the computer case. (Not shouting)[Your body carries Static electricity. Static will fry out the hardware comp ... Dell Dimension 8250 PC Desktop

I have a dell demension 4300 that recently started having issues, slow cutain effect, freeze ups. harddrive clicking away. Then one day I had the blue screen that said an error was detected. Then it wouldn't reconize the harddrive but it would go into the bios screen and then not do anything else. So I took it in to have it diagnosed and they said the edie circuit on the board was fried. They offered me a card option for the back but I opted to replace the motherboard with one that was listed as


CaSmogTech,There is a No Signal on the monitor because the monitor is not receiving a Video Signal.Your computer is not producing a video signal.In essence, your computer isn't working, because there is no Operating System on ... Dell Dimension 4300 PC Desktop

Need manual to put wiring back correctly please ta muchly


This is MSI/Support and the download page for the MSI MS-7104 V1.0Motherboard Manual in Zip file form,http://www.msi.com/index.php?func=downloadfile&dno=4036&type=manualGranted, it's not the 2.0 ver ... PC Desktops

Power BOX supply cord problem or hardrive problem?


Check these settings first. In a clear spot on the screen where no icons are, right click and go to properties, box opens and at top should list from R to L, themes-desktop-screensaver-appearance-advanced. click on screensaver, close to bottom click ... Toshiba Satellite M40-S417TD Notebook

How does the power switch and led plug up on a GT5428 motherboard?


This is Gateway Support, and Support Documents for the Gateway GT5428 Desktop PC,http://support.gateway.com/s/pc/R/1009466/1009466nv.shtml ... Gateway GT5428 PC Desktop

HP dv1000 monitor just stopped working.


Description\015\012During the startup or boot process of the notebook, the display is very dim and barely readable. It remains dim when it reaches the Windows desktop. \015\012\015\012Restart the notebook with AC power\015\012Perform the following st ... HP Pavilion dv1000 Notebook

I get a 1-3-3-1 error code beep on Toshiba Satellite M35x-S109


Well it sounds to me like it is your actual install, I suggest you that you do a factory restore, \015\012Toshiba laptops from mid 2007 onwards dont have a recovery disc supplied with a purchase of a laptop. Instead, Toshiba has added a ... Toshiba Satellite M35X-S109 Notebook

Dell e137fp monitor flashing green...


Below you will find my recommendations for troubleshooting this issue:1. Reseat the power cord and verify a good power source. To reseat the power cord, follow the steps below: 1.1 Power down the system. 1.2 ... Dell E173FP 17" LCD Flat Panel Monitor

For the last few weeks i haven't always been able to connect to the net,on the few occassions i have no prob! but why can't i always get in? had this notebook for 14 months without a prob. only started about 6 weeks ago in that time i have only been able to access the web about 5 times one of them today. switch on and do everything as normal but just won't connect, any guesses?


First i would try moving the switch that is located on the front of the netbook to the right. Once the switch has been moved the wireless networking icon will appear on the screen indicating that it has been enabled.If this doesn't help m ... Acer Aspire One PC Notebook

Gallery 1740 Trips out my G5


Right I got my formac monitor open by removing the Bezel, it's tricky\015\012but not too hard. The casing is suprisingly flexible and forgiving. The\015\012clips are backed by a double sided tape on all four edges. Start from the top and give the tap ... Formac Gallery 1740 Oxygen 17.4" LCD Monitor

Acer 4720,when switched on wifi button,the light for wifi is flash and the funcion is worked.But switched off wifi button,the light is still on.How can i switch off the light?


For Windows Based Computers\015\012\015\012 If the drivers for the wireless adapter contain a setting to toggle wireless radio, it can be located using the \015\012\015\012following path: Start > Settings > C ... Acer Aspire 4720 Notebook

Similar Problem:posted by Squanto on Feb 26, 2006


Before you give up on this monitor I would try some troubleshooting first. The clicking noise you hear is probably the monitor power going on and off:\015\012\015\012-Make sure you plug your monitor directly into a working wall socket. I?ve had lots ... Dell UltraScan 19" SVGA Monitor, 1600x1200, .25mm, Black P991/B-07

Had to replace power switch on emachine computer need to know where wires go


I'd like you to look at this motherboard, and compare it to yours. It's an Intel Seabreeze T3 motherboard. My data states it was used in many computers, and the eMachines T3830 being one of them. ... E-Machines eMachines T3830 PC Desktop

My msi k8n neo platinum is not starting no power in mother so please tell me what should i do and whats the problem in motherboard it has no power when press start it and no beep no power tell me


Bad Power On switch, or bad power supply. My money's on the bad power supply.There is a way to bypass the Power On switch. Should you wish to know the procedure, state so in a comment.(Believe upper right of page)A ... PC Desktops

Dell Dimension 8200 does not power up.


1) It could be something as simple as the 4-pin ATX +12 Volt power cable isn't plugged into the motherboard.The 4-pin +12 Volt power cable supply's power to an Intel Pentium 4, and above, processor. Looks like this, ... Dell Dimension 8200 PC Desktop

Wireless adapter radio


When your computer is switched on, the WiFi radio is almost always transmitting or receiving signals. In certain situations, as in an airplane, signals from the radio may cause interference. Use the following methods if you need to disable the radio ... Acer Aspire 3000 Notebook

How do I turn the radio on the wireless card - Acer Aspire 3000 Notebook


When your computer is switched on, the WiFi radio is almost always transmitting or receiving signals. In certain situations, as in an airplane, signals from the radio may cause interference. Use the following methods if you need to disable the radio ... Acer Aspire 3000 Notebook

I have a dell desktop, when I first plug it to the outlet, it turns on, everything turns on but I can even turn it back off, because its not connected to the monitor, the monitor says its on power safe mode, and when I click on any key on the keyboard or click the mouse nothing happens. Cant turn the computer back off through the power, I have to unplug it from the outlet again if I dont unplug it it will continue running nothing happens, i can hear the fan though


Wait, did I just answer your question on another post? If so then you weren't as detailed last time. It sounds like you either have a power switch issue or a power supply problem. Go ahead and plug it in, if it automatically turns on then hold dow ... PC Desktops

WiFi turns itself off


Hi Troy, \015\012Don't know if this will work with your Dell, but on my Averatec, I had to do the following. \015\012Go to Start>Right click on My Computer and select Properties. Click on the Hardware tab, and Device manger. Click on + ... Dell Inspiron 6400 Notebook

I am working on an HP Pavillion a1220n Desktop and I am getting different bootups each time. First we had a visual (video), but when we enter bios, the computer would not freze up, but simply just reboot itsself, and it would reboot everytime by itsself, no matter where you were at from 15-20 seconds after booting up. So I removed the CPU/FAN and Heatsync and they were covered with dust, I cleaned the dust off, and plug it back in, and now when I turn it on, the fans are running in the back, b


You didn't break the computer, They did.(EDIT: This is a long solution. I detailed it out, because I thought you would want this knowledge. I apologize for the length of it, however)Computers MUST have the inside cleaned out o ... PC Desktops

The acomdata drive is not responding. The light comes when powered on, but my computer cannot find the drive, nor does the drive behave as thought it's processing.


I devised these simple steps that tend to remedy quite a few issues with most portable / external hard drives (though not always)\015\012\015\012A few things to check but assumes USB and Windows for other interfaces / operating systems si ... PC Desktops

Wireless button won't switch to on and i can't access web wirelessly. how to i repair this


Their is a possibility that your laptop went into a low power state, and someone accidentally switched the wireless switch off physically then powered back on. if this is the case the issue would be the laptop had a image of the files and how they we ... PC Laptops
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.7142 seconds