Having problems with your Dell UltraSharp 1905FP LCD Monitor ?

Dell flat sceen will come on every time,then blanks out.I HAVE CHECKED CONNECTION,AND NOTHING IS BENT OR BROKEN.


Answers :

The problem is your backlight lamp is bad. Your description is of very classic symptom for the backlight. When it warms up enough it shuts down. You can either replace the LCD assembly or monitor or try replacing the backlight bulb itself. You'd have to call around to some repair shops to see what they'd charge to see if it is worth it to you to fix it or replace it. Here is a link to a site online that shows the bulbs and how to replace them if you want.

\015\012http://www.ccfldirect.com/?gclid=CPPCiNau9JkCFQkzawodGFudQg
Check your video card
Repair Help & Product Troubleshooting for Dell UltraSharp 1905FP LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Dell flat sceen will come on every time,then blanks out.I HAVE CHECKED CONNECTION,AND NOTHING IS BENT OR BROKEN.


The problem is your backlight lamp is bad. Your description is of very classic symptom for the backlight. When it warms up enough it shuts down. You can either replace the LCD assembly or monitor or try replacing the backlight bulb itself. You'd have ... Dell UltraSharp 1905FP LCD Monitor

LCD monitor goes blank


It appears that the display resolution set in your display properties is out of the range that the LCD can display.Try this.Boot to the ENABLE VGA MODE by pressing F8 to get the Windows Boot Menu. If you can get to the deskto ... Gateway FPD2275W LCD Monitor

Moniter stays blank


I used to repair LCD flat screen from Dell. I am not sure that my method might be applicable to your CRT monitor. Anyway this is how to examine what wrong with the monitor. You have to\015\012check if you can see the image on the screen or not after ... Relisys RLT1720 17" LCD Monitor

We have an HP Pavilion a1410y desktop computer. We've had some problems in the past with crackling sound on certain games the kids play, but otherwise the computer has worked fine. We went on vacation last week and unplugged our electronics while away. When we returned and plugged things back in, the HP starts up, but shows no picture on the screen. We've tried unplugging everything, letting it rest, replugging and restarting. Nothing. I tried replacing the monitor with one from another compute


Hello, Ron.The problem is with your video adapter (the port on your computer that connect the cable from your HP Pavilion to your monitor.From HP Support:Inspect the video cable and video connectors for \015\012dam ... PC Desktops

Bluish screen -


Is it a greenish blue?..... if so you have lost your red signal..... check your monitor connectors for bent or broken pins...... usually happens after swapping cables or monitors on a computer..... you could also have a bad cable or monitor.....\015\ ... MPC Computers Envision EN 5100e 15" Flat Panel LCD Monitor

One key fell off


You should be able to place it on the retainer and press it on, you may need to move it around a bit. If it just flat won't snap back on, check the retainer to make sure that the pins that fit into the clips on the back of the key aren't bent or brok ... Toshiba Satellite A85-S107 Notebook

My l g monitor screen suddenly turned into pinkish colour..i dont know whats the problem..i did degaus also but no use..


Dear Sir \015\012Welcome to Fixya Customer Support \015\012We will Help You\015\012Generally this problem arises due to faulty monitor Signal cable or by broken fins of VGA cable.check your monitor connectors for bent or broken pins ... Computer Monitors

Monitor Display Problem.


The first Polyview has a power supply problem (a short) and locks out the power until it is unplugged. You need to check the voltages inside the Monitor to determine which component/s are faulty. I hope you know electronics if not leave it to the r ... Polyview V17E 17" LCD Flat Panel Monitor

Dell Flat screen blackout?


Hi I have the same problem with 19 LCD\015\012monitors from Dell. This is how to check it. Power on both CPU and monitor. After the monitor goes blank, you\015\012check that you can see the image on the screen by shining a flashlight into the\015\012 ... Dell E151FP 15" Flat Panel LCD Monitor

Samsung 931 B - Dual monitor setup. one monitor no longer shows anything - LED is blinking about once every 0.75 seconds. either power cord or either source cable works with other 931B, but broken one shows nothing on screen, ever. screen actually blinks SLIGHTLY at same interval as LED. not using DVI cable- using old school rgb on each. i need two identical monitors. fix this one (myself or professionally) or get new one?


The caps (capacitors) in the powerboard are going out. This is a very common problem in all class and price ranges of modern lcd and plasma tv's/ monitor's. I don't know if this problem has been like this for awhile or it just started, but either way ... Samsung SyncMaster 931B 19" LCD Monitor

I have a Compaq Presario laptop with a broken


Hi:\015\012Just plugging in the monitor to your VGA port on the laptop won't make it display. You have to toggle to the exteral display, or both. Usually you have to hold down your function key, and then hit the external display key. It could ... HP Compaq Presario F761US Notebook

Broken power button on HP pavilion desktop


Ok check this out, follow the two wires that come off the power switch to the motherboard, just take a flat head screwdriver and touch those two pins together and your pc will boot up. and to fix this all you have to do is go to your local pc shop (n ... HP Power button/LED board kit with LED cable and local I/O cable (use 348274-001

MY MOUSE USED TO WORK


Hi there.\015\012I am going to assume its a usb one\015\012\015\012First off disconnect as many items as you can that are connected to your computer.\015\012shut down and restart.\015\012plug in ... Acer Aspire One AOA110-1588 Notebook

Note book 5100 dell


If you have no lights when plugged in, first check the power supply. Check it with an ohm meter or using another computer. If the supply checks good the check the jack on t ... Dell Inspiron 8500 Notebook

Thanx for the advice


Are you using a vga to dvi adapter then? Even though this usually is not an issue with older flat panels I have seen this problem where only a dvi to dvi will work. Secondly, If the panel calls for those extra amps you do need them and a replacement ... MPC Computers Envision EN 7100s 17 in. Flat Panel LCD Monitor

Black screen flashes after initial power up


This happened to me, and I fixed it, so read on! Switch on... green LED for a couple of seconds, Brief flash of light with display working, the total shutdown. Switch off, repeat but press the front panel power button as soon as the green LED comes ... Sony SDM-HS73P 17" LCD Monitor

New laptop lcd display not working


Check all usb connections i just fixed a emachine that seemed to boot up but no display would show lcd or ext. so i got to looking and one off the usb ports was broke and bent downt into the opening and shorting out when i removed it and turned back ... Gateway MT6451 Notebook

When I switch on the computer there is nothing on the screen


Do you hear anything during startup, beeps, fans or drives spinning, lights on the front or back of computer flashing or lit up? Do you hear the Windows starting sound?\015\012Let us know more then we can troubleshoot better. It is starting to ... Dell OptiPlex GX520 PC Desktop

My pc beeped twice and nothing came


Lack of video signal is usually 1 of 3 things, Power supply (PSU), Video card or Motherboard (mobo).Situation #1: If you get a blank screen and no sounds or movement it either indicates that the power supply unit (PSU) has failed or somet ... Dell Dimension 2400 PC Desktop

No connection from cpu to screen.


By working fine, I assume you mean the monitor goes into its test/diagnostic displays. If that is the case, most likely your roommate has hit upon more or less the correct deduction. Two possibilites should be attempted before assuming to much ... Compaq Presario 7594 PC Desktop

Heat from monitor - Computer Monitors


The monitor,screen,adapter or display of a\015\012computer is the primary user interface. Monitor problems are some of the\015\012most common computer problems since the voltages inside a monitor can be as\015\012high as 10 KV. Many of the problems ... Computer Monitors

Keyboard not lit up and screen blank but on. Running hard


I would get another hard disk, replace the old one with it, and plug your old hard drive into the other drive controller socket (rigt next to where your HD is plugged in now. you can plug them both onto the same ribbon cable if it has enough plugs on ... Compaq Presario s4020wm (DK214AR#ABA) PC Desktop

Monitor comes up shows "acer" then says no signal and goes black


The interface between the monitor and the cable might need replacement. Please check it. ... Acer AL2016 W 20" TFT LCD Monitor

Blank screen i have a acer travelmate 8100 after changing the screen, when i power on the computer my screen stays blank, i tried three (3) screens and i get the same problem i don't even see a boot up nothing. can you help me?


Seems like the connection might not be setup correctly inside the laptop. Check for bent pins for where the lcd screen connects to the motherboard, and also make sure any "ground" screws are in like they were if there are any. ... Acer Ferrari 4000 Notebook

I have a 2002 MAG INNOVISION FLAT SCREEN MODEL 780. I use this monitor as a dual monitor with my lap top. However today I still can view everything but with a pink hue. I have gone to the color controls on the right side of the panel to and tried adjusting screen color and reset but doesnot seem to work. I unplugged the monitor for 2 minutes and nothing changed. Is it time fo a new moitor?


This could be a problem with the monitor's data cable. Try to check it & find if there is any bent pins on the connector.If this is not the case, there could be a loose connection on the monitor's PCB, or a failing component. This needs to ... Mag Innovision Computer Monitors
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 1.0835 seconds