Having problems with your Dell PowerEdge 6650 Server ?

Can not boot dell 6650 from external dvd - Dell PowerEdge 6650 Server


Answers :

Have you checked boot device options....from BIOS
\015\012Use F9 during boot to goto ROM-BIOS and change Boot device option to CDROM/DVDROM.
\015\012Insert Boot media or DVD-Win2003, to DVD-ROM device..
\015\012reboot Server, try now
\015\012If still issue.. Check to boot Server using some other media..
\015\012if other cd media works, then it could be DVD-Win2003 faulty, otherwise download firmware for CD/DVDROM and upgrade it and check if DVDROM works, otherwise you have to contact Dell Support..
Repair Help & Product Troubleshooting for Dell PowerEdge 6650 Server

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Can not boot dell 6650 from external dvd - Dell PowerEdge 6650 Server


Have you checked boot device options....from BIOS\015\012Use F9 during boot to goto ROM-BIOS and change Boot device option to CDROM/DVDROM.\015\012Insert Boot media or DVD-Win2003, to DVD-ROM device..\015\012reboot Server, try now ... Dell PowerEdge 6650 Server

Dell Poweredge 4300 Bootup problem after cmos battery replacement


Check the version for the Raid Controller. This may need to have the firmware to be upgraded. If the controller is removable, take the controller out and then see if the computer will continue past the bios. If the controller is built-in, then disabl ... PC Desktops

I'm trying to install Microsoft Server2003 on a Dell PowerEdge 2600 Server. I belive that the CD ROM is faulty since it doesn't boot off it even though I have the right settings in BIOS. I try to connect a external CD ROM since the data cable to the internal CD ROM is a unusual size/plug. However the computer freezes upon start up (at the first screen) or in BIOS if I connect it there. Please advise, Thank you


Another common way around installation is to copy the whole contents of the CD / DVD to a hard drive.\015\012\015\012There are a few methods.\015\012\015\012My proffered is to make a bootable flash drive on another machine wit ... Dell PowerEdge 2600 Server

Dell Poweredge 4300 will not boot up after cmos battery replaceme


Configure your System bios and reboot. Your Hard disk drive was not configured. Pl configure. it will work properly ... Computer Servers

Does Dell PowerEdge 4600 Server support DVD ROM


I am working on one of these now and yes, it should boot from DVDROM. Be aware that it is a notebook style drive and there are no onboard IDE or SATA controllers, so once the drive dies you're in for a wallet hit. Same goes for the floppy drive which ... Dell PowerEdge 4600 Server

Dell PowerEdege 1600SC not recognizing IO devices


Just go into the bios and insert the correct parameters. you shut it off before it could save the settings. Or hit fi on boot and it should take you into the bios and you cand sort it out in there. If you want an easy way, just do a system restore. S ... Dell PowerEdge 1600SC Server

Dell gx60 cd-rom not working . pc would not start windows xp pro have to use F1 key turned off Primary driver 1 and secondary driver 0 and secondary driver 1 pc starts windows without the F1 key but have no cd-rom put any of the items on to auto pc reverts to only starting with F1 key. I thinkk I might be better installing a external cd drive connected by usb and use that instead would this world and hopefully save all tha hassle of putting on primary 1 and the two secondary drivers what do you


Hi Rose, I'm Fred, and I am a Dell tech. :).External drives are tricky because the computer may not be able to access them to boot from. Your best option is search for a replacement to the optical (cdrom) drive. Since you are buying one, try to ... Dell Optiplex GX60 PC Desktop

No Boot on 1600sc


The easy answer is:\015\012\015\012Did you ensure the CPU fan connector is attached to the PROPER motherboard CPU fan power pins?\015\012\015\012The 2nd easy answer is:\015\012\015\012Are you sure your CPU is properly placed inside the socket? Could ... Dell PowerEdge 1600SC Server

Gateway mx3222b laptop ram upgrade problem


Your computer does not support 1GB memory sticks. The max memory for that system is 1GB which would be 2 sticks configured as 512MB\015\012\015\012see below for the specs (i bold, italics and underlined the main part)\015\012\ ... Gateway PC Laptops

Dell poweredge 1650 and norton ghost


Okay, hate to answer my own question. Where I got confused was with the protocol.ini file that is used in Norton Ghost on a boot disk to load the network information, including the network protocol to be used (netbeui in this case) and what network ... Computer Servers

Unable to restore computers original factory settings with Dells suggestion of control f11 when computer starts up


If you have already used the cd's to install the os, this will not work. there is another option which you can try.\015\012\015\012Manual Reinstallation\015\012 \015\012Manual reinstallation can be the most time consumi ... PC Desktops

Dell PowerEdge 2450 Server issues


Power down thy system,pull the hard drive half way out remove all cards from the slots power up see if you go pass the processor etc,if not go into the system setup f2,integrated devices turn them all.see if you go further if you do go back in turn ... Dell PowerEdge 2450 Server

Format a dell latitude cs laptop


Hi rashmifirst g o to bios setup and check your external dvd is detected .If not detected in bios then enable legacy 2.0 in bios advanced option then go to boot option and save first as dvd drive.then uc an boot with it.Let em ... Dell Latitude CS Notebook

How many hard frives can be installed


You can put as many drives as you can fit as long as you have the cables and connection. Usually 4 is the max in a computer, but you can by a SCSI IDE card and add even more. The biggest problem is to make sure that the jumpers are set to slave on ... Dell Dimension 4600 PC Desktop

PC will not boot from CD drive


Disable the harddrive in the bios and set the cd to 1 boot.Check sometimes there are 2 cd drive .Cd-rom and the number or model of the dvd drive... ... Dell Dimension 4600 PC Desktop

Constant beep on poweredge 840 appears to work alright


Hi\015\012\015\012Besides standard beeps codes indicating Processor, CPU, Memory or Systemboard failures, \015\012Dell PERC (PowerEdge Expandable Raid Controller) or SAS Controllers (Serial Attached SCSI) generate beeps to alert fai ... Dell PowerEdge 700 Server

Booting with External DVD for Dell Inspiron 1525


You need to go to the bios. and change the boot/start menu there. when you start your pc. press f2 continuously and you will see a blue screen. go to start/boot using arrow keys. make sure that the num 1 priority is externall hdd or usb ... Dell Inspiron 1525 Laptop Jet Black

Dell PowerEdge 1600SC Server problem


I had the same thing happen in a 600SC about a month ago.\015\012Replaced the memory, and it fixed the problem.\015\012\015\012It did the same hang. Would run fine for any where from a hour to 3 hours, and then quit (hang). And I ... Dell PowerEdge 1600SC Server

PowerEdge 2600 does not boot up ?


This server is a compleate wast of time trust me ... Dell PowerEdge 2600 Server

Dell PowerEdge 2600 Server


For Dell PowerEdge 2600 Server you got:Expansion Slots : • \015\012 \015\012 \015\012 \015\012 \015\012 \015\012 \015\012 x 2 - PCI-X 64 Bit (133 MHz) Full Height, Full Length• \015\012 \015\012 \015\012 \015\0 ... Dell PowerEdge 2600 Server

Dell XPS w/Mirrored drives. No C drive when using boot disk.


As RAID uses block for block copy, a re-sync when adding in a new mirror on RAID 1 will take some time, and system performance will be affected during that time period. There is no indication in windows if the rebuild is complete as this is bei ... Dell My XPS M2010 Notebook

Problem I have dell server poweredge 830 and install the window xp server 2003 a problem has occured. When i try to reinstall the server 2003 then the disk is formated automatically. data is lost. the system is not booted from server 2003 CD. Plz tell me solution. i shall be thankful to you. Abdul Razzaq


This server direct not boot by windows cd....and u any time install window u lose the all data....because they have scsi hard drive and configuring bydefault Raid 5 ......so plz make backup before u start this prosiger.......Dell providing u lo ... Dell 2.8 GHz Second Processor for PowerEdge 830 Server Pentium 4 (DF904) Processor Upgrade

No SCSI Chips found on the adapter


You might want to update the firmware for the scsi controler,plus upbate the esm ,and the backplain for the server ,you should be able to locate this on the support.dell.com website.failing that if you are using a raid card this might be bad,however ... Dell PowerEdge 6400 Server

How to reinstall windows xp if files are missing??


CLEAN INSTALLATIONNOTE: Before proceeding, make sure all necessary backups are completed.* Insert the Windows XP Reinstallation CD into the top CD drive* Remove any external devices from the computer: (except the mouse & ... Gateway 310 Series (158920) PC Desktop

Trying to boot from external dvd drive


U must either have one of the foll...to boot and install OS...also the seq in BIOS must be availabe and enabled\015\0121 Floppy\015\0122 CD Rom Drive - internal\015\0123 CD Rim Drive - External connected thru USB\015\0124 You ... Dell PowerEdge 2600 Server
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.8445 seconds