Having problems with your Dell PowerEdge 4400 Server ?

Rebuild a poweredge 4400 with nt4

\015 I want to totally fubar a 4400 and reinstall fresh NT4. How? Everything I try leads me back to Dell scsi devices, containers, utility configs....none of which work. Just want to format it, put nt on it and rebuild.\015

Answers :

You in the correct area you first delete all containers then re do the scsci drives follow the menu space to selct the drives then you inisalize not format if you format each drive you will be workng for hours on format make the containers then let the contoler check consistancy you will be finished in 5 hours
Repair Help & Product Troubleshooting for Dell PowerEdge 4400 Server

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Rebuild a poweredge 4400 with nt4

You in the correct area you first delete all containers then re do the scsci drives follow the menu space to selct the drives then you inisalize not format if you format each drive you will be workng for hours on format make the containers then let ... Dell PowerEdge 4400 Server

I have a working Dell Poweredge 2650 with 2 x Xeon 1.8Gig processors, 5 x 36GB hard disks, running Windows 2003 Server. I have recently purchased a newer Poweredge 2650 with the same configuration except that it has 2 x Xeon 3Gig processors. I would like to transfer the OS and data from the ''old'' (slower) 2650 onto the ''new'' (faster) 2560 to improve general performance. The idea is to do it in one day, starting with the OS and data on the old 2650 and finishing the day with the OS and data

You should be able to do this by moving the drives all at once ALL DRIVES MUST BE PLACED IN THE SAME SLOTS 0,1,2,3,4, do not mismatch else it will be a nightmare ............HOWEVER BACKUP your data up if you are going this route,on paper it might s ... Dell Refurbished PowerEdge 2650 Server

Dell Poweredge 4300 Bootup problem after cmos battery replacement

Check the version for the Raid Controller. This may need to have the firmware to be upgraded. If the controller is removable, take the controller out and then see if the computer will continue past the bios. If the controller is built-in, then disabl ... PC Desktops

Dell Poweredge 4300 will not boot up after cmos battery replaceme

Configure your System bios and reboot. Your Hard disk drive was not configured. Pl configure. it will work properly ... Computer Servers

Missing NTLDR file

The first thing to do is try to change back whatever hardware or software change you just made (this could be as simple as leaving a floppy disk in the drive or you need to reseat the IDE cables). If the contents of the drive are especially important ... ASUS Eee PC 2G Surf Notebook

Been having this problem for 2 months.. computer is turned off... have been rebooting from CD in drive for 1 year... harddrive tired and cannot boot up by itself... lately cannot get to any Recovery mode, etc. after computer is turned on, error msg. file corrupt etc. comes immediately.... the hal.dll message comes up. file is missing or corrupt. how do I get to reinstall the file if I cannot get computer to work and be able to access internet?

If you have a Windows XP CD, follow these steps.\015\0121. Boot from the CD and start the installer2. Choose to install onto the already formatted partition with the unbootable Windows, but opt to leave the existing filesystem and a ... PC Desktops

Constant beep on poweredge 840 appears to work alright

Hi\015\012\015\012Besides standard beeps codes indicating Processor, CPU, Memory or Systemboard failures, \015\012Dell PERC (PowerEdge Expandable Raid Controller) or SAS Controllers (Serial Attached SCSI) generate beeps to alert fai ... Dell PowerEdge 700 Server

Motherboard i bought an internal hard drive, its 360GB and so forth. I went to install it on this computer and cannot find a SATA port on the motherboard. Do I need to use an add in SATA card, and if so what kind should I get and where can I find it?

Most of the new systems and motherboards support SATA connectors onboard. In your case there is none as you have found.\015\012\015\012So the best option is always upgrading to a new motherboard in case you need to add more SATA drives.\015\012\015\0 ... HP Pavilion 513n (P9850A#ABA) PC Desktop

Dell XPS w/Mirrored drives. No C drive when using boot disk.

As RAID uses block for block copy, a re-sync when adding in a new mirror on RAID 1 will take some time, and system performance will be affected during that time period. There is no indication in windows if the rebuild is complete as this is bei ... Dell My XPS M2010 Notebook

Dell poweredge 1800 scsi drive not found

Hi,check if the drive is showing in the bios of the server, shut down the server, take out the power cable, press and hold the power button so as to realease flea power, open the server, and reseat the data cable at both ends and if there ... Dell PowerEdge 1800 Server

Poweredge 1600sc cant see other 4 drives

You may have a raid 5 setup. you should be able to confirm this within the raid bios (ctrl+m). if all disks are part of the raid 5 array i believe you will only see this as one virtual disk. a raid 5 array will put the data across all the disks along ... Dell PowerEdge 1600SC Server

Help with server boot problems flashing orange lights etc

Seems the RAID is broken. You may see which drive (hot swappable?) it showing an error code with its lights in front. If not, I would suggest re-seated all drives.If you see one that is not right, remove it all the way, while it is on, then pus ... Dell PowerEdge 4600 Server

Data recovery how to recover data from 3disk RAID5, with disk0 and disk1 DEFUNCT on an IBM eServer xSeries 225 Model 8647-5BX

Unfortunately, a three disk RAID 5 can only tolerate a single drive failure. Is it possible that disk 0 and disk 1 were reversed? If so, then you might be dealing with only one failed drive and might be able to rebuild the RAID if you get disks bac ... IBM eServer xSeries 225

The system is setup using the RAID 5 config, now out of 5 drives it says 'OK' for 3 drives on 0, 1 & 2 and for 3 & 4 it says 'Replacement'. Is there any way of finding the correct Logical sequence of the drives. Also if we replace the remaining 2 with 2 new drives will it be able to recover? We have tried swapping the HDD in the remaining two slots but getting the same result, the message that appears is SLOT 1 Drive Array failure'

Dont you have any levelling inside the machine? Go open and check.When you have replaced the 2 defective drives with a new one, restart the computer and Raid 5 will automatically rebuild. ... HP ProLiant ML370 G4 Server

No Boot on 1600sc

The easy answer is:\015\012\015\012Did you ensure the CPU fan connector is attached to the PROPER motherboard CPU fan power pins?\015\012\015\012The 2nd easy answer is:\015\012\015\012Are you sure your CPU is properly placed inside the socket? Could ... Dell PowerEdge 1600SC Server

Rebuilding Toshiba Satelite Pro

Hmmm..do you have your files backed up first? ... Toshiba Satellite A135-S2276 Notebook

Bios for adapter 0 is not installed 4600 poweredge - system keeps rebooting, gets to windows screen, no login prompt and reboots and has the bios error

Hi,\015\012\015\012There are problem with Operating System ,It has been corrupted so pls re-install the operating system . ... Dell PowerEdge 4600 Server

MadDog MD-16XDVD9 could not perform end of disc-at-once

Have you tried checking your basics ? \015\012Firmware ?\015\012ASPI ?\015\012Disk Defrag ?\015\012IDE location ?\015\012Jumper settings ?\015\012What type of media are you using ?\015\012What programs ... PC Desktops

Acer recovery disk download

I keep getting this on my lap top and cant get ride of it can you help me?? Multi (0)disk(0) rdisk (0) partition (2)\\Windows\\AppPatch\\drvmain.sdbTRAP 00000006================EXCETION================multi(0)disk(0)rdisk (0) ... Acer Aspire 5315 Notebook

Wireless card not functioning/disabled after loading XP in a Compaq Presario C700T CTO Notebook PC

The wireless is not going to turn on and off via the switch properly until we get the drivers loaded to make it work. There are 3 possible types of wireless card it could be, so we have to find out the exact model number of your system. On the bott ... Compaq Presario 700 470024-192 Notebook

Burn fail or cd skip

Kind of sounds that way. They are pretty inexpensive now days, and simple to install.\015\012\015\012Good luck ... Gateway M680X PC Notebook

Same Problem Again - Mega Raid.... Unknown Error

Hi\015\012\015\012The title of your post suggests that you have "Maga RAID" errors. Maga RAID messages would be in line with issues on the LSI PERC sub-system.\015\012 ... Dell PowerEdge 1800 Server

My dvdburner of laptop hp pavilion DV2726CA reads any cd dvd but

Can use usethe drive to load data or write data and how about listening to music?? ... Acer Aspire 5100 Notebook

Windows Installer opens Word, so I have a 10 second delay opening a doc and Excel opens with a stdole32.tlb error window every time.

It is* Font Definitions */\015\012 @font-face\015\012\011{font-family:SimSun;\015\012\011panose-1:2 1 6 0 3 1 1 1 1 1;\015\012\011mso-font-alt:宋体;\015\012\011mso-font-charset:134;\015\012\011mso-generic-font-family:auto;\015\012\011mso- ... PC Desktops

Maths & statistic

Standard deviation is the average root mean squared deviation from the average of the numbers.\015\012\015\012Familiarize yourself with the wikipedia page on standard deviation: ... Computer Speakers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0447 seconds