Having problems with your Dell PowerEdge 1800 Server ?

Dell poweredge 1800 scsi drive not found

\015 I am facing the problem with my power edge 1800 server scsi hard disk are not detecting and giving error primary drive 0 not found \015

Answers :

check if the drive is showing in the bios of the server,
shut down the server, take out the power cable, press and hold the power button so as to realease flea power, open the server, and reseat the data cable at both ends and if there is another power cable available in the server swap it with the existing cable plugged into the scsi drive.

and now try to start your server.
Further Queries are welcome
Repair Help & Product Troubleshooting for Dell PowerEdge 1800 Server

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Dell poweredge 1800 scsi drive not found

Hi,check if the drive is showing in the bios of the server, shut down the server, take out the power cable, press and hold the power button so as to realease flea power, open the server, and reseat the data cable at both ends and if there ... Dell PowerEdge 1800 Server

Dell Poweredge 4300 Bootup problem after cmos battery replacement

Check the version for the Raid Controller. This may need to have the firmware to be upgraded. If the controller is removable, take the controller out and then see if the computer will continue past the bios. If the controller is built-in, then disabl ... PC Desktops

How many hard frives can be installed

You can put as many drives as you can fit as long as you have the cables and connection. Usually 4 is the max in a computer, but you can by a SCSI IDE card and add even more. The biggest problem is to make sure that the jumpers are set to slave on ... Dell Dimension 4600 PC Desktop

No SCSI Chips found on the adapter

You might want to update the firmware for the scsi controler,plus upbate the esm ,and the backplain for the server ,you should be able to locate this on the support.dell.com website.failing that if you are using a raid card this might be bad,however ... Dell PowerEdge 6400 Server

Boot from non Dell raid controller

Check the Boot Sequence again -- if there are any "SCSI" devices listed, enable them, and make your CD-ROM the "primary" boot-device (so that you can install Windows) and make this "SCSI" device the SECONDARY boot-device, and disable the internal har ... Dell PC Desktops

Dell: Primary hard drive 0 not found Primary

Sorry, but this isn't a good sign. Drive 0 is most likely your main hard drive, and only if you have a second one would you computer ever find anything on Drive 1.\015\012\015\012I would check the connections inside from the motherboard to the ... Dell Optiplex GX60 PC Desktop

MadDog MD-16XDVD9 could not perform end of disc-at-once

Have you tried checking your basics ? \015\012Firmware ?\015\012ASPI ?\015\012Disk Defrag ?\015\012IDE location ?\015\012Jumper settings ?\015\012What type of media are you using ?\015\012What programs ... PC Desktops

Dell dimension 2400 diskette drive 0 seek failure

Check your BIOS setting to see if it detects the hard drive (Primary disk 0). If it can't detect the hard drive then the hard drive maybe faulty. Open the case unpluge the IDE cable from the hard drive and reconnect it again, also unplug the IDE cab ... Dell Dimension 2400 PC Desktop

Hi My hard drive crashed can it is old can it be

Most likely scenario is the drive is dead, but also the BIOS on your computer is old itself, I believe there are a few BIOS upgrades available for that model, might want to check with Dell support site. If you have access to another computer, there i ... Dell Dimension 4600 PC Desktop

Help with server boot problems flashing orange lights etc

Seems the RAID is broken. You may see which drive (hot swappable?) it showing an error code with its lights in front. If not, I would suggest re-seated all drives.If you see one that is not right, remove it all the way, while it is on, then pus ... Dell PowerEdge 4600 Server


One of your settings in the BIOS is set to look for a drive and it is not finding it. That is what that message means. If you have multiple drives in this machine then one of them has failed. If you only have one drive then the settings are set to lo ... Dell Dimension 5100C (D51CL1) PC Desktop

Dell 8250 Hard drive 0 not found after move from US to UK

IT sounds like the hard drive went bad, especially with the clicking noise. If you want to keep the system, you will need to buy a new drive (relatively cheap) from tigerdirect or newegg and istall it. NOt sure if dell still send out recovery cds wit ... PC Desktops

Poweredge 1800 server

Hey,I looked over the spesifications for the poweredge 1800 servers, go ahead, it will work perfectly but there is one problem in the windows XP setup, you will need to insert / load SCSI or SATA drivers for the hard drive With a floppy d ... Dell PowerEdge 1800 Server

Raid 0 on Intellistation 6221?

That particular work station comes with both IDE and SCSI drive interface controllers. The IDE drive should be used for your OS. The SCSI drives for your data storage. Now, the issue is to get the SCSI to work in RAID_0 as I understand.\015\012 ... IBM IntelliStation Z Pro 6221 PC Desktop

Dell optiplex gx110 device detection problem

I'm guessing that the computer is not booting at all. This is saying that it cannot find any hard drive to talk to. Drives are labeled in the computer code with numbers starting at 0. There are up to 2 drives on an IDE ribbon cable, the Primary, and ... Dell OPTIPLEX GX110/200 PIII-866MHz 256MB 20GB (PCPIII866DELL) PC Desktop

Connect ide or sata drives to a dell poweredge 2600 for additional storage

Yes and No.. \015\012\015\012The standard machine only allows SCSI, (no IDE or SATA or SAS connectors...\015\012\015\012However SCSI drives are not cheap.. so\015\012\015\012To overcome the power issue (you will no ... Dell PowerEdge 2600 Server

Pc won't boot

You can check on other HDD if your problem solved means your HDD damage if your problem not solved check your HDD jumper setting then your problem not solved change or repair your motherboard and cpu ... Dell OptiPlex GX270 PC Desktop

Dell Poweredge 4300 will not boot up after cmos battery replaceme

Configure your System bios and reboot. Your Hard disk drive was not configured. Pl configure. it will work properly ... Computer Servers

Re: your suggestion for my Dell Lattitude D600 Hard Drive Problem

Ok, now we have some good discourse! While I'd always prefer to use a friend's laptop to test my fringe hypotheses, having your own is a fine option too. And it sounds like you have an enclosure too, so you are pretty much all set. It's r ... PC Laptops

I recently moved and when i went to start up my computer it takes me to a blue screen say memory is being dumped. Prior to that though there is a screen saying that a "0 drive" can not be found. Any idea as to why my dell dimension 4600 is doing this?

Drive 0 cannot found means either the system is unable to detect your hard drive or your you have a problem with your operating system ie. windows. try re-seating your HDD and run diagnostics, restart system when you see the dell logo. tap F12, when ... Dell Dimension 4600 PC Desktop

Dell PowerEdge 1400SC Can not locate hard drives or partition

You need to download Dell's Storage Managment ISO file, create a CD, boot the system with this CD and set up the array. This will also give you the option to install the O/S with no user input. ... Dell PowerEdge 1400 ( pe1400/210 ) Server

I need to add more hard drives to my poweredge 2600

The prices charged by Dell for spares (or 'upgrading') these ancient boxe's makes it cheaper to throw them away (and replace them with half a dozen NAS boxes ..)However, after making the 'chuck it' decision (and taking it off Dell Support ... Dell PowerEdge 2600 Server

Cannot boot my dell dimension 3000

Look at this link read carefull and try again http://www.goodells.net/dellrestore/fixes.htm ... Dell Dimension 3000 PC Desktop

I have lost the scsi drive on a dell 1600sc and would like to convert to sata. During boot up the sata controller is reconizing the 2 hard drives but, come but with "no primary drive found"

The best thing to do is reinstalling SCSI, SATA can only manage two disk per channel on this server, and the data transfer time is longer.If you set SATA, check jumper settings, that is probably reason why you get no primary drive.A ... Dell PowerEdge 1600SC Server

What kind of hard drive do I need for an acer aspire 4315? From what I have found it needs to be 68 pin, is there anything else? I have replaced a few hard drives and this is an easy fix (much easier than digging into my Thinkpad and replacing the power jack!!). I am just not familiar with this model, she brought it over with her from the Phillipines.

A hard drive with 68 pins is a wide SCSI-3 hard drive device.\015\012SCSI drives need a SCSI controller (eg in this case an Adaptec SCSI-3 controller) and the SCSI ID of each hard drive can be set from 0 to 7. The ID setting on the hard drive i ... Acer PC Laptops
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.6708 seconds