Having problems with your Dell Pentium 4, 2.26 GHz (1W391) ?

Monitor working properly but it sounds continously,very noisy

\015 When i turn on the computer the monitor starts working after some seconds starts continous noisy sound hoe can solve it?\015

Answers :

Hi im josh in cebu phils.may i help you? Friend try this solutions:
\015\012Problem: Your Monitor Doesn't Display—The System Unit \015\012Issues a Series of Beeps\015\012Your PC uses beeps to communicate with you when something is \015\012wrong with the video setup. Check the settings on your video card to make sure \015\012that they're correct for your system. Also check any switches on the motherboard \015\012to make sure that they're set up correctly for your type of video card. (You \015\012should consult your system's instruction manual for details on this procedure.) \015\012Check to make sure that your video card is seated properly in its slot; you may \015\012even want to try inserting the card in another slot. If none of these \015\012suggestions works, try a new video card, or have your system examined by a \015\012professional.
\015\012In a pre-Windows 98, system, if you have two video cards \015\012installed at the same time, they can sometimes interfere with each other and \015\012cause neither to work properly. Try removing one of the cards; if this results \015\012in the remaining card working, you need to reconfigure one or both of the cards \015\012to better work together. (With Windows 98 and later you can install two video \015\012cards to run multiple monitors simultaneously.)

\015\012Problem: Your CRT Monitor Doesn't Display—It Makes a \015\012High-Pitched Whine\015\012This whine indicates that your CRT-type monitor, for some \015\012reason, is operating at the wrong frequency. Turn it off immediately—this problem could seriously damage your \015\012monitor! Now check the settings on your video card. Chances are that it's set to \015\012a higher resolution than your monitor is capable of displaying. If this isn't \015\012the problem, your video card itself could be defective. If your video card is \015\012okay, your monitor might be defective.
\015\012Problem: Your CRT Monitor Pops and Crackles and \015\012Starts to Smell\015\012Like the rest of a computer system, monitors can get dusty. \015\012When dust builds up inside the monitor, it can generate static charges.
\015\012It's also possible that the power supply inside the monitor has \015\012become defective. If the monitor demonstrates these symptoms, turn it off \015\012immediately and take it to a repair center. The technicians can either clean \015\012your monitor or replace the power supply if necessary
You may visit your monitor services center if the problems stills occur after performing the solutions mentioned. hope i helped you friend good luck
Repair Help & Product Troubleshooting for Dell Pentium 4, 2.26 GHz (1W391)

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Monitor working properly but it sounds continously,very noisy


Hi im josh in cebu phils.may i help you? Friend try this solutions:\015\012Problem: Your Monitor Doesn't Display—The System Unit \015\012Issues a Series of Beeps\015\012Your PC uses beeps to communicate with you when something is \015\012 ... Dell Pentium 4, 2.26 GHz (1W391)

Sound on my cpu doesn't work properly


GET NEW SPEAKERS DUHHHH!!!!!!!!!!!!! ... HP vs15 15"LCD Flat Panel Monitor

Does not power up


It's a dreadful way to start a day - you press the power button on your computer and nothing happens. Do not fear because all may not be lost! Follow these simple steps to determine why your computer won't turn on. Note: It is very import ... IBM ThinkPad T22 2647 Notebook

Dell XPS 730 - Brand New - No display - Fan Loud


Check if u r able to open the optical drive if its opening then power supply is gone bad or else get mobo an power supply replace ... PC Desktops

Monitor not coming on - Packard Bell Easynote R4650


It's a dreadful way to start a day - you press the power button on your computer and nothing happens. Do not fear because all may not be lost! Follow these simple steps to determine why your computer won't turn on. Note: It is very import ... HP Pavilion a305w (DM181AR) PC Desktop

The speakers are intergrated in to the monitor and don't seem t.


First, find out if the speakers or audio is working properly. At your PC menu, left click Setting, Control Panel, and Add hardware. Click the add hardware wizard and just follow the instruction until you will find all the installed hardware of ... NEC Speaker Wire Computer Speakers

Monitor reads: PC entering power saving mode then shuts off;PC on


First do not take the hard drive out and put it in another computer. It is configured to run in the computer it's in.\015\012\015\012Next, you probably did have a power surge either from your power supply or the power in your home. It s ... HP Pavilion a810n (PP164AA) PC Desktop

I have acer al1917w A monitor but no sound


There is no sound driver, they are speakers, they work off of the audio output jack on the back of your PC, on the motherboard. If you have the sound drivers installed for the motherboard, and no sound, then you have plugged the monitor audio cable i ... Acer AL1917W LCD Monitor

HELP We just got a used compaq presario fx700 from a friend and we have no idea how to use it. We don't know how to get the buttons on fromt to work or the speakers. We are still running on WIndows 98 and hooked the compaq up to our computer. Please help with any information.


This monitor came with a computer I bought years ago. \015\012\015\012To get the USB working, you need to run a USB line from your computer to the back of the monitor. There are two connection types provided. The line provided to us wh ... Compaq Presario FX700 17" CRT Monitor

X2Gen Monitor speakers not working


This sounds like a straight hardware issue. However, to be certain, try to attach another monitor to this PC, and if it works properly, you will know that there is nothing wrong with the graphics card/driver or other related component of the PC invol ... X2Gen MG19MY 19" LCD Monitor

Have power no display


This is my response to another posters problem, and sounds applicable here too:\015\012\015\012This sounds eerily like what happened to me a few months ago with a 15" Omnitech monitor I got at an online auction. Unless you are a tech, or ... LG L1932TQ LCD Monitor

I have a virus on my computer Toshiba Satellite


You're going to need a few bits before you start:\0121) Drivers:  Start here:http://uk.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp...and download a complete set of drivers for the operating system yo ... Toshiba Satellite Pro A200-EZ2204X Notebook

My Computer I took the cable wire off and still it's doing the: VGA input; no input signal, after I keep turning it on and off I do finally get my computer to come on though. I didn't know how to take the back of it off though to try that. Please assist. Thank you.


OK. Thanks for the response. That message is telling us that the monitor is getting no signal from the computer. In your case, it sounds like it is working part of the time. So, here are the things that can cause the problem, starting with the mo ... HP Vs17 17" LCD Flat Panel Monitor

Moniter Black - Buttons not responding


This sounds like a straight hardware issue. However, to be certain, try to attach another monitor to this PC, and if it works properly, you will know that there is nothing wrong with the graphics card/driver or other related component of the PC invol ... X2Gen MG19MY 19" LCD Monitor

Signal has gone - ViewSonic VX2235WM Monitor


If the monitor comes on and displays a message like "no input signal" or something similar, it's working properly but there is nothing coming from the computer. People often think that the computer is working and the monitor is at fault, when in fact ... ViewSonic VX2235WM Monitor

I have an Acer Veriton 3600 Desktop and when I set it up with a Dell lcd monitor with inbuilt speakers I don't get any sound but when I replace it with speakers the sound comes on. I know there is no problem with the Dell monitor as the sound does come up with another Desktop that I have. Just wondering why it's not compatible with my Acer 3600 GT without the use of speakers though and way I can rectify this problem. Someone on here suggested that I go to Sound Properties and click on "Other dev


For the inbuilt speakers on the monitor you should see a plug in on the back part of the monitor that would fit a similiar plug that goes to your sound on the computer. you need a cord to from there to your computer. Second do NOT spray anything ne ... Acer Veriton 3600 (V3600GT00150) PC Desktop

X2 gen monitor


This sounds like a straight hardware issue. However, to be certain, try to attach another monitor to this PC, and if it works properly, you will know that there is nothing wrong with the graphics card/driver or other related component of the PC invol ... X2Gen MG19MY 19" LCD Monitor

Green Flash power only on one computer


It sounds like the monitor functions properly and your computer functions properly, but the combination causes a problem. Try making sure the screen resolution on your main computer is set to an acceptable resolution for your monitor - AL1916. Try ... Acer AL1916B 19" LCD Monitor

Solid amber power light


Your Monitor is not connected properly http://www.microsoft.com/windowsxp/using/networking/setup/wireless.mspxConnecting Your Monitor1. Turn off your computer and unplug the power cord.2. Connect the white conne ... PC Desktops

Acer monitor x193w, no sound.


Please try to check the sound device status if its working properly thru right click My Computer icon > Properties > Hardware tab > Device Manager > (double click) Sound, Video & Game Controller OR System Device > System Speaker. a ... Acer X193WBD Monitor

I have a dell demension 4300 that recently started having issues, slow cutain effect, freeze ups. harddrive clicking away. Then one day I had the blue screen that said an error was detected. Then it wouldn't reconize the harddrive but it would go into the bios screen and then not do anything else. So I took it in to have it diagnosed and they said the edie circuit on the board was fried. They offered me a card option for the back but I opted to replace the motherboard with one that was listed as


CaSmogTech,There is a No Signal on the monitor because the monitor is not receiving a Video Signal.Your computer is not producing a video signal.In essence, your computer isn't working, because there is no Operating System on ... Dell Dimension 4300 PC Desktop

My gateway g7-500 fails to start properly. Whemn power on I get a long beep followed by 2 short ones and the monitor screen remains black.


Cause:This issue can be caused by any of the below situations.\015\012 \015\012\015\012New hardware conflicting with old hardware.\015\012Bad or failing hardware device.\015\012 ... PC Desktops

No sound coming out of the speakers


This sounds like a driver or settings issue. Go into control panel and open up the sound and audio devices control. Go to audio and make sure that the proper sound card is selected for playback and recording. If you don't see your card listed in the ... TDV Vison vi06fv19x Monitor

X2Gen MW19U: Start "Auto Adjusting"


This sounds like a straight hardware issue. However, to be certain, try to attach another monitor to this PC, and if it works properly, you will know that there is nothing wrong with the graphics card/driver or other related component of the PC invol ... X2Gen MG19MY 19" LCD Monitor

I'm having problems starting my desktop computer. After I push the power button, I hear the computer working but it doesn't fully com on. There's no display on the monitor and I continue to hear the computer working and working.


When you say you hear the computer working and working do you mean that the fans are going and the lights are on? \015\012 \015\012i ask this because the fans and power lights can come on just from the powe ... PC Desktops
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 1.0506 seconds