Having problems with your Dell OptiPlex GX1 PC Desktop ?

My Dell Optiplex GX1 will not boot. The Monitor shows no signal.

\015 My Dell Optiplex GX1 will not boot. The Monitor becomes black when video cable is connected. But when removed, no signal comes on the Monitor. What is the problem?\015

Answers :

Check whether ur ram is working or not. remove the cpu side door and remove the ram from the ram slot and clean it using a eraser gently and fix again it back and power ur pc on and check it
Repair Help & Product Troubleshooting for Dell OptiPlex GX1 PC Desktop

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My Dell Optiplex GX1 will not boot. The Monitor shows no signal.

Check whether ur ram is working or not. remove the cpu side door and remove the ram from the ram slot and clean it using a eraser gently and fix again it back and power ur pc on and check it ... Dell OptiPlex GX1 PC Desktop

Booting Problems With Dell Optiplex gx270 and gx260

Does anything show up on the screen when you access your BIOS?Have you tried a fresh install?Are there two video adapters installed (one integrated and the other in the AGP slot? ... Dell OptiPlex GX270 PC Desktop

Gibberish + won't finish loading Windows

Remove the new memory first. if that does not help you may have some a virus, indicated by safe mode workng fine. One other thing i found would do that is a damaged Hard drive, not to likely here because safe mode works. ... Dell Dimension E521 PC Desktop

I have a dell demension 4300 that recently started having issues, slow cutain effect, freeze ups. harddrive clicking away. Then one day I had the blue screen that said an error was detected. Then it wouldn't reconize the harddrive but it would go into the bios screen and then not do anything else. So I took it in to have it diagnosed and they said the edie circuit on the board was fried. They offered me a card option for the back but I opted to replace the motherboard with one that was listed as

CaSmogTech,There is a No Signal on the monitor because the monitor is not receiving a Video Signal.Your computer is not producing a video signal.In essence, your computer isn't working, because there is no Operating System on ... Dell Dimension 4300 PC Desktop

Screen Wiggles, CPU Shuts Self Off, Powers Up Very Slowly

#1 Sounds like a video card resolution setting problem. This can happen when the settings are too high for the monitor. What size is your monitor?\015\012\015\012#2 Sounds like hibernation. You can adjust the power settings if you right c ... Dell OptiPlex GX280 PC Desktop

Dell Monitor comes on but no picture

The monitor isn't getting a signal from the computer, which is why the power indicator goes orange. There are two possibilities:1) The computer isn't operating correctly. It may not be starting up at all when you turn it on, and you have ... Sceptre X9G-NagaIV 19" LCD Monitor

External monitor on Laptop not receiving a signal

When you start your computer, keep hitting the F8 key. you will get a menu that comes up.. Choose the VGA mode.. this will stop the computer from loading video drivers and will allow you to install the new monitor. \015\012\015\012Give tha ... Fujitsu Siemens AMILO D-7830 Notebook

Optiplex GX260 won't boot

I had the same issue and accidentally discovered a temporary solution. Unplug the power from the back of the machine, open the case and unplug the ATX power connection from the motherboard. With the ATX cable unplugged, plug the power cord back in. W ... Dell OptiPlex GX260 PC Desktop

Screen on desktop shows blue - Dell Dimension 3000 PC Desktop

Many monitors will produce a blue screen when they are receiving no input signal but most will give you some kind of alert on the screen to let you know the monitor is not at fault.\015\012Try disconnecting the video cable from your system to s ... Dell Dimension 3000 PC Desktop

DELL INSPIRON 1501 won't BOOT...and LEDs flashing

Hi..This is an Hardware Failures: Doesn't Boot Up.First of all, most of the\015\012hardware failures that are going to be presented in this article\015\012require you to disassemble the l ... Dell InspironTM 1501 Notebook


When you first turn on the system, listen closely for any beeps. If you hear any try to remember or write down the pattern of beeps. Then go to Dell's site and find the manual for your model and look up the BIOS or CMOS error codes. This will indi ... PC Desktops

No signal on monitor - Dell Dimension 3000 PC Desktop

Check that the power is plugged into the back of the monitor and also to the power point, make sure power point is ON. If anything pull plugs out and re-connect both just to make sure.Make sure monitor cable is also plugged into the back ... Dell Dimension 3000 PC Desktop

My VX924 Green Led Blinks until fully booted to windows

Ok if what im understanding is you tried on another computer and it worked great \015\012the monitor is not your problem the problem lies with your video card\015\012the video card could be outdated\015\012the video card could need ... ViewSonic VX924 19" LCD Monitor

We have Dell OptiplexGX745 smallform factor desktop computers that we need to run two monitors.

If your Dell Optiplex GX745 came with the ATI Radeon X1300 graphics card, that has One - DVI graphics port, and One - VGA graphics port, it's no problem.This link shows an ATI Radeon X1300, and the two above mentioned graphics ports, ... Intel computers9: P3 Computer Computer (Reconditioned) (CSINTELP3) PC Desktop

Monitor comes up shows "acer" then says no signal and goes black

The interface between the monitor and the cable might need replacement. Please check it. ... Acer AL2016 W 20" TFT LCD Monitor

How do i format it

Process for Windows XP Re-installationWINDOWS RE-INSTALLATION WILL WIPE OFF ALL THE DATA.1. Insert Windows XP operating System Disk In The CD Drive.2. Shut Down The system.3. Disconnect Everythi ... Dell Dimension 4600 PC Desktop

ViewSonc VX924 LCD Monitor

Check the information at Viewsonic's website regarding their warranty:http://www.viewsonic.com/support/warranties/limited-warranty/If you have your proof-of-purchase and it shows the monitor is less than a year old, it would b ... ViewSonic VX910 19" LCD Monitor

DELL E153FPf doesn't show the image

OSD Warning Messages\015\012A warning message may appear on the screen indicating \015\012 that the monitor is out of sync range.\015\012\015\012 \015\012\015\012 \015\012 \015\012 \015\012 Cannot \015\012 Display This Video ... Dell E153FPf 15" TFT LCD Flat Panel Monitor

Dell 24'' Ultrasharp went blank

I suspect the invertor supplying power to the Xenon backlight tubes has failed.\015\012This can be reapired but may not be cost effective.\015\012Ask for a quote from your local computer specialist but keep in mind the cost of a new monit ... Dell Computer Monitors

"No signal detected" when LCD connected with DVI-D Cable

Thank you for providing your configuration details.\015\012You have failed to specify wheather or not your LCD Display is under Warrenty.\015\012\015\012Perhaps these simple trouble shooting procedures will get the job done.\0 ... BenQ FP71E 17" LCD Monitor

While plugged in, the monitor goes very very dark, (close the lid and open it again, it becomes bright then dark again) unplugged there are no issues. Dell Inspiron 1525 Windows Vista Please advise.

Hello and thank you for using Fixya's services. I have a couple of troubleshooting tips for you:First troubleshooting: If it boots up and is at least showing the splash screen (Dell splash screen or text) then it w ... Dell Inspiron 1525 Notebook

I have a Compaq Presario laptop with a broken

Hi:\015\012Just plugging in the monitor to your VGA port on the laptop won't make it display. You have to toggle to the exteral display, or both. Usually you have to hold down your function key, and then hit the external display key. It could ... HP Compaq Presario F761US Notebook

I was tring to Connect Two Computers to One Monitor, but i didnt get it, does someone know how to do so? I bought a KVM switch, USB to use between a new Acer running Win XP and old Dell with Win 98. Could not get the Dell to show up on the monitor, although the correct light shows up on the KVM and the USB mouse lights up when the computer boots. -- Read a few minutes ago about a source switch and found that my flat panel has a menu item to switch from analog to digital input. Could that be the

I guessing that since **-one responded you've given up and returned the whole mess but what the hey.A lot depends on the KVM you're using. There are some high end units that will match different sources to the monitor but most work best ... AOC 19LVWK LCD Monitor

Problem with Fan - Dell Laptop Inspiron B130 ?

Hello,\015\012\015\012If the fan is dead, then the laptop will shut itself off after a short while to prevent heat damage. It is normal for the fan to spin up when you turn on the laptop and then stop turning. The fan will kick in again w ... Dell Inspiron B130 Notebook

Dell E228WFP Monitor failure

To me, that's an XP driver issue. If the screen turns on at all, then goes dark during XP boot, that's nearly a ringer for drivers. Out of range on the Hz? Tried booting in safe mode to see if it loads with standard win drivers? That migh ... Dell E228WFP LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.9145 seconds