Having problems with your Dell Latitude D600 Notebook ?

My screen goes off when ever i instal my vga driver


Answers :

If you are using the driver which is not supported, you may experience such issues. follow the below link and download the ATI driver under video option.
Repair Help & Product Troubleshooting for Dell Latitude D600 Notebook

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I was watching an exercise DVD this morning on my Vaio and after about half an hour the image on the screen was replaced with different coloured blocks / stripes. I had to turn the computer off with the power switch. I think the fans were blocked and it overheated - is this a temporary problem that will resolve when the laptop cools down?


There are 2 likely causes for this problem. 1, the screen is damaged. 2, there is a problem with the connection between the screen and the motherboard. The latter is the most likely.\015\012Do you get the lines w ... Sony PC Laptops

Monitor goes blank automatically after about 40 minutes...


Hi Randygui,\015\012\015\012Sounds like the back light inverter board is bad.\015\012\015\012It's a very common problem.\015\012\015\012LCD's use four small cold compact fluorescent bulbs to back light the display. (thats what gives the LCD it's brig ... BenQ FP71G 17" LCD Monitor

If we close the screen a little bit it goes bright white. Have to switch off and restart. Also, after doing a power point presentation the display is only opening about 80% of full screen with a black strip down the right hand side and 1/2 inch grey at the bottom. How do we display the screen to be 100%? Thanks


Installing the correct drivers for the GFX card and setting the correct NATIVE RESOLUTION should fix that issue...\015\012\015\012\015\012\015\012Try playing around with other resolutions (right-click empty area of\015\012Desktop->Properties ... ASUS PC Desktops

I have a Gateway mx3422 notebook. I cannot get the display to clone when I hook it up to a projector. The notebook screen goes black and the display shows on the projection screen.


So, as soon as you hook up the projector, the LCD goes blank? 2 things control the output, the function key to enable the external video and the display settings in Windows. If Windows shows 2 displays (Control Panel, Display, Settings), then chang ... PC Desktops

Laptop to tv


\012Right, well, IF your TV has a DB15 Female Plug on it then you CAN, connect it up and it will work, as a second "Monitor". OR If the laptop, has a "Composite Video" a Yellow RCA socket, then you ... Acer Aspire 5500 5570-2609 Laptop

I have this monitor.. For some reason at times the screen goes completely black. Actually it fades white, and likes drowns da colors of what ever is on da screen, than it fades black and stays black. When this occurs, it normally would take ten or more minutes to snap by to regular as tho nothing just happened and goes back into working normal until the next occurance. Now a days it's been doing it more and it doesn't seem to want to snap back anymore. Its a HD monitor but I don't have it set up


This is your graphic driver related issue.For that when you power up the computer press F8 key then enter in "Enable vga mode".Then go to start menu ->control panel->display property->settings.Change screen resolution to 1024*76 ... Samsung 2333SW 23" Widescreen DVI LCD Monitor

Resolution goes back to 800X600X75 sva 20" LCD


When you can't change the screen resolution then most likely only the default VGA driver has been installed. You need to install the graphics driver of the video card that is installed in your computer.\015\012To check which graphics driver is ... SVA-USA Computer Monitors

Toshiba Satellite A100 PSAA2C video boot


Have you tried installing or running the drivers disc for your laptop right after the windows installation without restarting it first? that might do the trick... it's either the driver for your laptop's board/ chipset or the vga driver... ... Toshiba Satellite A100-S8111TD Notebook

My screen goes off when ever i instal my vga driver


If you are using the driver which is not supported, you may experience such issues. follow the below link and download the ATI driver under video option. ... Dell Latitude D600 Notebook

Screen goes blank when I move the mouse


Did it work properly using a VGA (analog) cable? If so, check your DVI (digital) cable against the pictures at the bottom of http://www.datapro.net/techinfo/dvi_i ... Samsung SyncMaster 204B 20.1" LCD Monitor

My HP monitor (f50) has malfunctioned


Try these 2 steps if they don't work get back to me :)Step 1. Connect the video cable and turn on the computer. What happens?\015\012 \015\012\015\012 \015\012\015\012 ... HP Pavilion F50 17" Flat Panel LCD Monitor

Acer 22 in monitor


From what you say, I'll assume you see stuff on the monitor like the BIOS info,and the Windows splash screen. Then it goes black.This happens when Windows loads the video drivers for your video card. Up until that point, you are using generic ... Acer Computer Monitors

Well I have a similar problem with my laptop screen . It goes blank after switching on my lap top , but not fully blank because I can still see what ever program is running on the screen( the screen is not fully blank, but almost) I assumed that installing windows 7 instead of my previous windows vista caused the problem . So I decided to go back to vista. But unfortunately , after upgrading to windows 7 , my dvd reader stopped working as well-_-. so i couldn't set it back to windows vista. my q


Dear friend, So many people using Windows 7 these days. Few enjoying & few faced some problems. But as per your problem going to say its a windows 7 problem. May be the some mistaken done by installer on the time of installati ... Acer Aspire 6920 Notebook PC

LCD monitor goes blank


It appears that the display resolution set in your display properties is out of the range that the LCD can display.Try this.Boot to the ENABLE VGA MODE by pressing F8 to get the Windows Boot Menu. If you can get to the deskto ... Gateway FPD2275W LCD Monitor

Hp pavilion dv9267ea problem with nvidia Display


I want to share my experienced with 2 units HP notebook; Presario V3000 (V3737tu) and Pavillion dv2000 (dv2505tx).The notebooks have problem with Intel & NVidia VGA driver , but all the problem now solved by using microsoft display driver ( ... HP Pavilion dv9000t Notebook

No screen image when booted


Go to Safe Mode and uninstall the older version of the driver of the VGA Card... reboot in normal mode, it has to login to the windows with no driver for VGA Adapater ... try to find the newest driver on internet and install it .. it should solve the ... NEC PowerMate 5250 PC Desktop

Can't set up network w linksys modem


Video card:Your computer has an integrated video card but has a "PCI Express" expansion slot for an upgrade. After the upgrade you will be able to play most games without the choppy frame rate...depending on what card you buy. Since ... PC Desktops

Screen shows different colour grids when starting then goes black with message in right corner "out of range"


Hello ssi1,This happens when your screen resolution is set to something higher\015\012than what your monitor can display. For example, if your monitor\015\012supports resolutions of up to 1024x768 and your video card allows you\015\012to ... PC Desktops

Screen goes off


Try booting into safe mode.. press F8 before the windows screen, and select Safe Mode as the boot option. If that is a temporary fix, then reinstall the driver, and make sure your Hertz settings are correct! ... Compaq Evo N610C Notebook

Pixels only goes to 640X480 - Videoseven V7 E17PS 17" LCD Monitor


When you cannot increase the screen resolution nor a higher color bit, this usually means the video driver has defaulted to standard VGA driver and 8 or 16 bit color.\015\012Install or re-install the latest video driver for your model video car ... Videoseven V7 E17PS 17" LCD Monitor

Laptop shaking about the laptop shaking etc problem u said to uninstall the display vga driver?? where can i find that to uninstall it??? my screen tottaly goes crazy


Not sure if this will help with that specific problem, but I recently upgraded the video driver in my Acer 6930-6809 laptop to the latest version available from Intel.The VISTA driver (IntelGraphicsMediaAcceleratorDriver-winvista_15.12.1. ... Acer Aspire 6930-6771 Laptop

ATI vga driver and compaq N610c


Plz i want compaq Evo N610c vga driver ... Compaq Evo N610C Notebook

"Input Not Supported" after adjusting screen resolution


What resolution are you trying to run? The native resolution for your monitor is 1440 x 900, setting to that should fix your issue ... Acer AL1916W 19" LCD Monitor

Toshiba tecra 9100. No standby or hibernate functions


This means that your laptop does not have the display drivers installed. Check you check in the control panel, go to system icon and click on device manager? Check to see what VGA drivers are installed. \015\012\015\012Do you see an escla ... Toshiba Tecra 9100 Notebook

Brand new Acer 15.4" screen. Display does not fill entire screen. It has a blank 2 1/2" strip on the right side and a 3/8" weird blank strip on the bottom that goes slightly freaky when you run the mouse over it. The computer seems to be running slow too. Screen was a replacement part number from a good supplier. (Screencountry.com). Do I need to re-install the driver? I am contacting Screencountry but they are on PST and are not open yet.


Yea you have installed the wrong drive for your VGA card need to go to hard ware and find out proper vga card ... Acer Aspire 5500 5570-2609 Laptop
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.9060 seconds