Having problems with your Dell InspironTM 1501 Notebook ?

My epson LCD only shows a blue NO SIGNAL screen???

\015 My computer, a dell laptop, is hooked up to my Epson LCD projector, but all i get is the NO SIGNAL sign on the projected image?? The LCD works with other laptops that I have had??? The Dell is fairly new. HELP!\015

Answers :

You just need to enable the 2nd monitor in display properties, right click on desktop and select properties then settings and right click on the 2nd display select attach.

or look at the keyboard press FN and look at the F1/f12 keys, one of them will turn the external display on or swap between outputs.




Repair Help & Product Troubleshooting for Dell InspironTM 1501 Notebook

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My epson LCD only shows a blue NO SIGNAL screen???


You just need to enable the 2nd monitor in display properties, right click on desktop and select properties then settings and right click on the 2nd display select attach.or look at the keyboard press FN and look at the F1/f12 keys, one o ... Dell InspironTM 1501 Notebook

Computer turns on, no signal to lcd. Hard drive


The blue screen was caused by corrupted drivers or a virus that was corrupting the drivers. Have you tried starting the machine in SAFE mode? To do this press F8 while the computer is starting before Windows loads. ... PC Laptops

The power light blinks solid blue every four seconds or so (it?s off in-between). The screen is blank. None of the buttons on the side function (such as ?menu?). I have a second similar monitor from the computer in the other room I?m using to type this proving the video card and cable are fine. We?ve always (as in years) left the monitor on (w/ a screen saver) but for whatever reason turned it off for four days when we went away recently. The monitor would then not turn back on. After leaving th


Hello,\015\012Two days ago I received a Gateway 900w FDP1975W Monitor from a friend. He told me that he would have to let it rest and it would work for about a hour or so and flash green with lines, then Flashing blue power light, then nothing. ... Gateway FPD1975W 19" LCD Monitor

Dead pixel I have a black spot on the bottom right corner of the screen..can it be repaired?


\015\012Please read the WHOLE of this guide before starting.\015\012Software Method\015\012\015\012Try running pixel fixing software. Stuck pixels can often be re-energized by rapidly turning them ... HP Compaq WF1907 Monitor

Hp pavilion f1930 shows pic for 2 secs. then blank


Rather than guessing, or blaming the computer, I fix the F1903 backlight problem. Power the monitor and using a bright flashlight check the screen to ensure there's an image, or the menu when you press the menu button. Nearly every one of the F1703 a ... HP Pavilion F1903 19" Flat Panel LCD Monitor

Gateway MT3421 Laptop start-up Issues


Start by removing the battery completely, and plugging the power cord into the wall socket. If the power indicator light comes on at the converter on the cord, your power cord is fine. Then plug the power cord into the computer. If the computer star ... Gateway MT3422 RTL Notebook

HP f2104 LCD black screen


My tv power light comes on,but the screen stay black,and in the back of the tv there is a red light that flashes. ... HP f2105 21" LCD Monitor

Hp lcd f1532 h


This can happen if the minus button which happens to also be the auto image-adjust button is effectively grounded due to some internal fault or\015\012if the switch itself has got jammed internally. In this case, if video signal is present, the ... HP Pavilion F1523 15" LCD Monitor

Signal degradation across vertical section of


This appears to be a common complaint on LCD monitors. Some LCD screens have control issues.An LCD screen is the panel and a bunch of Line control chips wrapped around the outer edge. A problem with one line top to bottom or left to right is al ... iiyama Computer Monitors

I have a dell demension 4300 that recently started having issues, slow cutain effect, freeze ups. harddrive clicking away. Then one day I had the blue screen that said an error was detected. Then it wouldn't reconize the harddrive but it would go into the bios screen and then not do anything else. So I took it in to have it diagnosed and they said the edie circuit on the board was fried. They offered me a card option for the back but I opted to replace the motherboard with one that was listed as


CaSmogTech,There is a No Signal on the monitor because the monitor is not receiving a Video Signal.Your computer is not producing a video signal.In essence, your computer isn't working, because there is no Operating System on ... Dell Dimension 4300 PC Desktop

ViewSonic VA912b monitor fading out during boot


It is probably the power supply, or the inverters. Similar problem with solution, though it requires you to know something about electronics.http://www.badcaps.net/forum/showthread.php?t=6876&highlight=*va912* ... ViewSonic VA1912wb 19" LCD Monitor

Blue screen after lcd replacement


Hi,Note - I am taking into consideration that all the connections are tight. Any loose connection might result in Blue Glowing Screen.Most of the new TV's display a blue screen when there's no signal for it to lock on.Try unpl ... Dell Inspiron 6400 Notebook

No display lights


Run the PSA Diagnostics and Obtain the PSA Error Code \015\012To run the PSA diagnostics and obtain the PSA error code, perform the following steps:\015\012Shutdown the computer.\015\012Press and hold the <Fn> key, ... Dell Inspiron 9100 Notebook

"No signal detected" when LCD connected with DVI-D Cable


Thank you for providing your configuration details.\015\012You have failed to specify wheather or not your LCD Display is under Warrenty.\015\012\015\012Perhaps these simple trouble shooting procedures will get the job done.\0 ... BenQ FP71E 17" LCD Monitor

I have a dell GX280 and I tried to connect it to a Olevia LCD TV but I have a problem to do so. I connect it via VGA cable. When I started the PC I could see TV display Windows logon and show PC is starting up. But then it turned to a blue screen with message 'A problem has been detected and windows has been shut down to prevent damage to your computer.'. and it continued to say that I needed to run a system diagnostic utility to check memory check etc. the technical information was 'Stop: 0x000


Lower you screen resoloution to 800x600 to start with. Also you must setup mutimonitor, correctly.\015\012\015\012\015\012Right, well, IF your TV has a DB15 Female Plug on it then you CAN, connect it ... Dell OptiPlex GX280 PC Desktop

Nothing on the screen at startup


If you cant get into the setup menu then I would think the monitor is defective,you did not state if you hooked up the monitor to a computer that has a vga port that works. ... LG 22" FLATRON LCD Monitor

I have a Dell XPs 1210 that has a broken screen. I also have a Avertec that I had the hard drive replaced on, however the screen on it displays all in blue... I am trying to find a reputable place to send my computers off for repair, also wanted to know is changing a screen as simple as some say...? Is the Avertec a screen problem or a video card problem?


Well you have a number of problems there. LCD screens can be replaced but how hard it is depends on your technical skill. if you routinly take things apart just to see what makes them tick or you build computers as a hobby then replacing an lcd scree ... Compaq Presario M2000 Notebook

No picture power light blinking blue


... BenQ FP757-v2 - 17" LCD Monitor

Signal out of range


1: Signal out of range meas the monitor can't handle the input refresh rate. lcd and Tft monitors usually supports 60 and 75Hz refresh rates.2: The Resolution you are using to view the desktop is too high, this number is depending on the size o ... Kogi L7CH Monitor

DV8309 power up problem: blue lights on for few seconds then off


The inverter inside the lcd panel is most likely your problem. Try removing the whole lcd screen from the laptop if you are capable and run it with the external screen to confirm. leave the lcd switch off (this lcd switch above the power button turns ... HP PC Laptops

The computer shuts off when the screen is adjusted forward.


This is going to be a little lengthy, and I thought I should advise you in advance.This is the Service manual, for the Sony Vaio VGN-FJ series notebook PC's. (The Vaio VGN-FJ270/B is part of the VGN-FJ series)http://www.tim.id ... Sony VAIO VGN-FJ270/B Notebook

LCD screen partially display's


This kind of issue is usually due to a loose inverter cable, re-seating the cable is a relatively simple matter. \015\012\015\012If the laptop is still under warranty you should co ... Dell Inspiron 6400 Notebook

Problem with Fan - Dell Laptop Inspiron B130 ?


Hello,\015\012\015\012If the fan is dead, then the laptop will shut itself off after a short while to prevent heat damage. It is normal for the fan to spin up when you turn on the laptop and then stop turning. The fan will kick in again w ... Dell Inspiron B130 Notebook

Gateway LCD powers on but has no picture


I have a Gateway FPD1730 LCD monitor. When I plug it into my Gateway 500x desktop the power light turns green and then says "Power Saving Mode" and then it goes black. It will occasionally flash on and have a picture and then go off. When I unplug th ... Sceptre X9G Komodo IV 19" Flat Panel LCD Monitor

I have a dv6000 laptop HP. I turn the power on. It bring to my password page. I enter my passoword. Desk top show up and then all the sudden a blue screen shows up with alot of numbers and letters for split second then the unit restarts itself over again. It was working perfectly fine an hour ago. HELP


Hello, \015\012\015\012This is usualy called "BDOD" as in "Blue Screen Of Death", more exactly a blue screen containing some error codes, some description of what was going on when it ocurred and a restart signal. You can't see the blue s ... HP Pavilion dv6000z Notebook
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.6940 seconds