Having problems with your Dell Inspiron 600M Notebook ?

Inspiron 600m,"no input signal check video cable"?

\015 My laptop has been working excelent in the docking station until recently, all I can get it the message " no input signal, check video cable" and I have searching on the net for a few days with no luck, I had opened the key cover and blow out the visible dust, clean the conector in the back of the laptop. any surgession would be appreciated. I am certain that the dock station and the others monitors are working fine, I have video if I use VGA cable to expand to the second monitor\015

Answers :

Do you have an external monitor for use when the laptop is on the docking station? If so, does your laptops screen come on when it's not docked?

If you're using an external monitor while the laptop is docked, make sure that the screen selection is for external monitors, by pressing/hold the FN key and then press the F8 key to cycle through the choices between LCD, Monitor/LCD or Monitor only.
Repair Help & Product Troubleshooting for Dell Inspiron 600M Notebook

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Inspiron 600m,"no input signal check video cable"?


Do you have an external monitor for use when the laptop is on the docking station? If so, does your laptops screen come on when it's not docked?If you're using an external monitor while the laptop is docked, make sure that the screen sel ... Dell Inspiron 600M Notebook

My monitor will not come on when power is applied automatically. the monitor does not come up when my system comes on. I just replaced the monitor which i swapped same exact monitor, but this one will not boot when the system comes up.


Please work through the following steps to troubleshoot your no power problem with a ViewSonic Monitor:\015\012\015\012Troubleshooting Power Issues: \015\012\015\012Disconnect and securely reconnect ... ViewSonic E70f 17" CRT Monitor

My Computer I took the cable wire off and still it's doing the: VGA input; no input signal, after I keep turning it on and off I do finally get my computer to come on though. I didn't know how to take the back of it off though to try that. Please assist. Thank you.


OK. Thanks for the response. That message is telling us that the monitor is getting no signal from the computer. In your case, it sounds like it is working part of the time. So, here are the things that can cause the problem, starting with the mo ... HP Vs17 17" LCD Flat Panel Monitor

Monitor not using all available space


Do NOT use the VGA cable. Only use the digital DVI cable for video. Using the DVI cable connect one end to the DVI connector on the monitor and the other end to the DVI connector on the video card. You should NEVER connect cables to ... Samsung SyncMaster 2253BW LCD Monitor

No video input, just crashed msg 'dvi signal - no input signal' 'vga signa- no input signal' I checked all cables, rebooted, detached the dvi cable and attached the vga cable', rebooted, tried with both cables. Is this a video card problem


Possible!!! try to reseat your video card.maybe this will help..\015\012\015\012if it doesn't work..let me know.. ... PC Desktops

Cant record from security camera on rd2780


There are several possible reasons for it:\015\012\015\0121. Check for a loose or false contact in the connector jack of the media player. Unplug and plug it again, or rotate it.\015\012\015\0122. The Video/Audio cable is defe ... Toshiba Netcam Software for Record Up To 16 Camera for Security (nwrec01)

How do I link my IBM t21 to my TV. The sounds works ok from the sound port, and i have an S-video cable to RCA connected, but do not get any picture on my TV


Http://www.youtube.com/watch?v=XqjJtdH_EI8\015\012\015\012\015\0121\015\012\011\011\011\011\011\011\011\011\015\0 ... IBM ThinkPad T21 Notebook

When i turn monitor on it comes up with vga input no input signal


Hi nobumsteers,This is most often caused by your VGA cable becoming detached from either the back of your computer or it's connection to the back of the monitor. First, check by unplugging both connections and re-attaching them firmly bac ... PC Desktops

Hanspree monitor says,''No signal input check video cable''


Ask the shop for a replacement cable. it could be broken. ... Computer Monitors

I have a hp m9150f pc and a sony wega sdtv, installed a s-viedo wire. need step by step instructions how to program, windows media center says set up tv signal, nothing I do seems to work. can you help me please


Step by step how to enable svideo / tv on your nvidia videocardPreparing the graphics card for TV Output.The\015\012first step in configuring your graphics card for TV output is to first\015\012identify what type of tv output ... PC Desktops

Projector giving green picture it is ok with RCA inputs ok with S video input but if i connect component connector like 15 pin vga from dvd player it gives green picture but with same cable if i connect pc piucture is ok , i have checked 2 dvd players as well have same problem


I think, the issue might be because of lenght of the composite cable. Not all projectors can "recognize the signal" on too long composite cables, try a "standard size" cable used on monitors, it is i THINK 1,8 feet long...? Dunno. Try two short cable ... HP Compaq nx7010 Notebook

Does my inspiron b130 laptop support s video output to my tv? I would like to find an adaptor from the 15 hole jack to an s video plug so that I can hook the laptop to a tv with an S video outlet. Do you know of anything like that?


Hi \015\012\015\012\015\012You need a vga to RCA/SVideo conversion adapter.You do not have to install any driver to use S-video port. Connect the S-Video cable to the back of your TV and turn it on. Using TV remote ... Dell Inspiron 9300 PC Notebook

My samsung 940N acts like a florescent tube, tries to start and doesn't


Use the self test feature.. follow the steps..\015\012\015\0121. Turn off both your computer and the monitor.\015\0122. Unplug the video cable from the back of the computer.\015\0123. Turn on the monitor.\015\012If the m ... Samsung SyncMaster 940N 19 inch LCD Monitor

When i turn on my computer all it tells me is sva no signal input please check video signal


No Signal. No signal coming from the computer.The monitor is working, but there isn't any video signal coming from the computer.1.Could be a bad video cable. The one from the monitor to the computer. Do you have another ... SVA-USA VR 17S 17" Flat Panel LCD Monitor

Screen says no signal input.


Well,this probably implies a lot of problems. 1.Check the video adapter cable,make sure the pins are not bent or broken. 2. Open the case panel of the left side and disconnect and remove components such as Vga card,rams,hdd,roms,floopy drive,other ag ... Compaq Presario 5000 PC Desktop

Dell m992 crt monitor


If it's getting no signal, make sure the monitor is set for the correct input. This would be either analog (if your cord has blue ends) or digital (if the connectors are white). Depending on wt yhat your monitor is, a button on the monitor will help ... Dell M992 19" CRT Monitor

Trying to connect my toshiba satellite a205-s5804 laptop to my sony bravia lcd 1080 t.v. I have connected VGA from laptop to t.v.VGA pc in on t.v..Also headphone out to sound in on t.v.. T.V. not excepting signal from pc,so pc input lite on tv not on.(no signal in) I also toggled fn+f5 on pc to alow 2 monitors,also lowered resolution down under 1080, since t.v. is 1080. T.V.not detecting a signal from pc. So what can i try next? What am i missing? THANKS for all your help.


Please double check that your VGA cable is working properly and you have installed the most updated version of video drivers.\012\012Is the TV not even playing the sound?\012Are you on the right channel?\012Only try checking the sound on a AV c ... Toshiba Satellite A205-S5804 PC Notebook

I am trying to hook my Eee 1000HE netbook up to my hdtv. I have 15 pin RGB cable but it doesn't work. Followed TV (Visio) directions, but it doesn't work.


More information would be helpful - what operating system are you \015\012running - XP or Linux? are you getting no signal at all? or just a \015\012picture and no sound? or vice versa?. What settings did you try?\015\012\015\012In the ... ASUS Eee PC 1000HE Netbook

Help MONITOR SAYS SIGNAL LOST - REPLACED HARD DRIVE - THOUGHT I HAD A VIRUS. EVERY ONCE IN AWHILE SYSTEM WILL RUN IN EITHER SAFE MODE OR REGULAS WINDOWS. THEN SIGNAL LOST APPEARS. WONDERING IF POWER TO HARD DRIVE IS A PROBLEM MY INDICATOR LIGHT STOPS FLICKERING AND STAYS SOLID. ANY IDEAS. MOTHERBOARD, POWER SUPPLY, ETC?


Signal lost usually means the cable is lose that connects the monitor to the back of your computer.\015\012with the computer off and unplugged , disconnect the monitor cable from the video port on the back of the computer and physically inspect ... E-Machines eMachines Desktop PC

SDM-HS73P Screen Flashes


This is a problem I have seen with a few LG monitors.\015\012Your Inverter circuit is fine (that powers the lights to your screen so you can see the image on the LCD panel) but the monitor does not like having a video signal attached to it. ... Sony SDM-HS73P 17" LCD Monitor

I have a dell GX280 and I tried to connect it to a Olevia LCD TV but I have a problem to do so. I connect it via VGA cable. When I started the PC I could see TV display Windows logon and show PC is starting up. But then it turned to a blue screen with message 'A problem has been detected and windows has been shut down to prevent damage to your computer.'. and it continued to say that I needed to run a system diagnostic utility to check memory check etc. the technical information was 'Stop: 0x000


Lower you screen resoloution to 800x600 to start with. Also you must setup mutimonitor, correctly.\015\012\015\012\015\012Right, well, IF your TV has a DB15 Female Plug on it then you CAN, connect it ... Dell OptiPlex GX280 PC Desktop

Signal has gone - ViewSonic VX2235WM Monitor


If the monitor comes on and displays a message like "no input signal" or something similar, it's working properly but there is nothing coming from the computer. People often think that the computer is working and the monitor is at fault, when in fact ... ViewSonic VX2235WM Monitor

Hello, I have a Gateway model GT5662, stock setup - Will not boot


Usually, if it's a motherboard that has a failed component on it, you will see failed Electrolytic Capacitors. The small aluminum 'Cans' on the motherboard.Note*The Electrolytic Capacitors that surround the Processor, should have sp ... Gateway GT5662 Desktop PC

How do I connect my laptop to my TV? - Dell Inspiron 1300 Notebook


\015\012\015\012click this link directly for more help.http://www.geekwithlaptop.com/how-to-connect-laptop-to-tv\015\012----------------\015 ... Dell Inspiron 1300 Notebook

HP 19" Monitor Blinking


The monitor is probably on protection.To start unplug monitor\015\012from power and from computer and test computer with different monitor\015\012to find out if it is monitor or computer fault.If it is computer fault and no vi ... HP vs19 (Silver) 19" LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.7219 seconds