Having problems with your Dell E771MM 17" CRT Monitor ?

MY COMPUTER DOESN,T RECOGNISE MY MONITOR SEPARATELY

\015 I HAVE BEEN TOLD IT IS MY GRAPHICS DRIVER BUT I DONT KNOW WHICH MY GRAPHICS DRIVER IS\015

Answers :

Hi,your problem is not a video driver issue,you need a driver for the monitor.you can go to manufacterer website and get a driver.
MMMmmmmm, no. The graphics driver won't have anything to do with recognizing the monitor. I'm assuming this is some flavor of Windows? Window will accept a "driver" for the monitor, which really is just an information (inf) file that tells windows what the monitor is capable of, so it won't try to make the monitor display something it should not, and cannot.

Get the driver from the Dell site, or this address has an executable they claim is the driver for your monitor.
http://members.driverguide.com/driver/detail.php?driverid=296757

If you get the inf file:
Right click an empty area on your desktop and select properties.
Select the Settings tab.
Click advanced button.
Select Monitor tab.
Click Properties button.
Select the Driver tab.
Click Update Driver button.
Try the auto install. If that doesn't work, try it again and point it to the inf file you got from Dell. This should allow you to manipulate the settings on your display.


Repair Help & Product Troubleshooting for Dell E771MM 17" CRT Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Monitor comes on, then goes back off, rinse, repeat.


Well here is a test you can do. When the monitor goes black, take a flash light and hold at it a angle towards the monitor, if you can still faintly see the image then you have a blacklight/inverter issue. Another common issue with this is the capaci ... Princeton Digital VL1918 Monitor

Lcd monitor 20.1


The white screen is caused by a total lack of control over all pixels.\015\012The opposite effect; all black, happens when a failure turns all pixels on, blocking all but a small amount of light.\015\012This could have more than on ... Westinghouse Computer Monitors

My computer light turns on then off, no fan no screen


Changed the power supply and Power On switch?New parts? Okay. We'll come back to them. For now, lets look over some simple things.I can tell you that even after 20+ years as a tech, I still get a little zealous, when it comes to bui ... Smart Modular SV3170A

Monitor problems HP w2007v Monitor. Less than 12 months old, working ok this morning. Monitor now no longer recognises input from pc. Error message reads no input going to sleep. However have plugged inold monitor to pc with separate cable and get same problem. HELP


It is possibly your video card that is having the fits. Try replacing your video card or have your CPU checked... It is not a problem with the monitor, rather a problem with the computer... ... PC Desktops

Monitor says no signal


This could be a multitude of things. Firstly, check the connections from your computer to your monitor, unplug them and plug them back in, make sure the thumb screws that connect your monitor to your computer and nice and tight but dont use a tool to ... Northgate (STAX2517C2) PC Desktop

Syncmaster 203B LCD not working with Vista 64


Try putting the graphics card from your old computer into your new computer. That is where I would start. ... Samsung SyncMaster 203B LCD Monitor

If we close the screen a little bit it goes bright white. Have to switch off and restart. Also, after doing a power point presentation the display is only opening about 80% of full screen with a black strip down the right hand side and 1/2 inch grey at the bottom. How do we display the screen to be 100%? Thanks


Installing the correct drivers for the GFX card and setting the correct NATIVE RESOLUTION should fix that issue...\015\012\015\012\015\012\015\012Try playing around with other resolutions (right-click empty area of\015\012Desktop->Properties ... ASUS PC Desktops

Emachine destop not recognising acer lcd monitor


It sounds more like the computer isn't starting up. The "no signal" message is coming from the monitor itself to tell you it's on but there's nothing coming in to display. Normally no special drivers are required for the monitor, and you'd see at lea ... Microtek C593 15" Flat Panel LCD Monitor

TOSHIBA TE2100 the screen is just black, doesnt seem to be working at all? how do I fix this?


This can be caused by:1.The monitor is not connected properly.2. Bad hardwareVerify that the monitor is properly connected in the back of the monitor as well as to the back of the computer.If\015\012the conne ... PC Laptops

Acer AL1912 sometimes doesnt start


Try reseating your cable connections. While you have them off, take some compressed air and clean both the connection ports on the back of the computer and cable connections. Check to make sure there are no bent pins on the cable connectors. If you k ... Acer AL1912 19" LCD Monitor

My monitor turns yellow


Computer monitors get separate red, green and blue video signals from the computer, and if you lose the blue the result is a yellow picture. This can be caused by video card failure in the computer (very unlikely), a bad cable (fairly common), or tro ... HP mx705 17" CRT Monitor

Computer "turns on" i hear four to five beeps, but the monitor gets no signal. a friend gave me the computer, only once did i see it boot up fully but it froze up so i had to restart it and it wont work. everytime i try i get the same thing four or five beeps and monitor says no signal. so i dont know whats happening. its a gateway computer runing windows xp. thats all i know. i know the monitor is good cause i tested it on another computer.


Without knowing the exact frequency/length of the beeps my first guess would be a bad stick of ram or a bad video card. If there is more than one stick of ram in the computer try it with one of the sticks pulled, pulling each stick until it does boo ... Gateway GT5028 PC Desktop

When i turn on my computer all it tells me is sva no signal input please check video signal


No Signal. No signal coming from the computer.The monitor is working, but there isn't any video signal coming from the computer.1.Could be a bad video cable. The one from the monitor to the computer. Do you have another ... SVA-USA VR 17S 17" Flat Panel LCD Monitor

Nothing on the screen after power on


Turn on the computer and complete the following steps:\015\012Step 1: Check cable connections\015\012(If you can see the initial HP or Compaq logo screen but later lose the picture, you can skip to Step 2.)\015\012check the video cable connection on ... HP Compaq FP 7317 17" Flat Panel LCD Monitor

Help how to connect computer to plasma tv screen with hdmi cable acer aspire 3682 wxci


Step 1\015\012Shutdown your computer and look at the rear of the case to determine the type of video connections that your machine has. Nearly all computers will have the standard 15-pin VGA output port. In addition, you may also find that your ... PC Laptops

Monitor goes blank after seeing XP during boot up.


Did u replace the video card with the same kind of model ? i guess yes ... when system starts hit the f8 key and than go in to safe mode ... mouse wont work so use arrow on the keyboard .. and in the safe mode just log in to admin account if availabl ... HP Pavilion a305w (DM181AR) PC Desktop

Computer monitor flashes on then turns off


Try the monitor with another computer. If it works, the video circuitry (whether it is on-board or a separate adapter) in the Gateway is the problem and needs to be replaced. Otherwise, the problem is with the monitor itself. From your description ... Computer Monitors

PC Problem, p4 processor, intel D850GB . I think its the cpu


Yes you do buy a new processor but here a tip to work it properly because its old enough your motherboard, when you buy a new processor, bring your CPU to the Computer Center, the company you buy a new processor, let them put it in your CPU. If ... Computer Processors

MY COMPUTER DOESN,T RECOGNISE MY MONITOR SEPARATELY


Hi,your problem is not a video driver issue,you need a driver for the monitor.you can go to manufacterer website and get a driver. ... Dell E771MM 17" CRT Monitor

What driver do i need for my acer desktop monitor


It will most likely not be the monitor at fault, but the video card in your computer.\015\012\015\012If your monitor is working like a monitor should, then it is a bit of technically dumb equipment. It can only do what the video card tell ... PC Desktops

My emachines monitor has no picture, hard drive is functioning properly. Monitor is black


If you do not get a screen with a LCD monitor its likely you have a inverter problem or BACKLIGHT problem. you might need to replace the LCD backlight or replace the monitor on the desktop.\015\012check to see if the laptop can get a picture by ... PC Desktops

Display appears only after several hours of waiting


Try plugging your monitor into another computer, if it works, plug your computer into a different monitor......if it works its a compatibility issue....if the new monitor doesnt work then its your video card, and if your monitor doesnt work on anothe ... Samsung SyncMaster 540N 15" LCD Monitor

Monitor not working after adding drivers


1. turn off your computer2. turn off your monitor3. Unhook the power and video cable from both4. Reseat them both on both ends. 5. Turn on your monitor6. Turn on your computerIf its still doesnt work after al ... Dell UltraSharp 1900FP 19" Flat Panel LCD Monitor

Menu/screen resolution/contrast box keeps popping up on screen.


By what your describing, the board in the monitor that allows you to make changes to the display is going bad (sounds like the settings button). If it were a notebook you might be able to get a board replacement (just an example I know notbooks dont ... E-Machines eMachines Desktop PC

Compaq FP 5315 Moniter


Have you checked the computer bios?\015\012\015\012 \015\012\015\012In case an item was changed in the BIOS, such as the primary display device setting, use the following steps to reset the BIOS back to its default configuration:\0 ... HP Compaq FP5315 15" LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.8507 seconds