Having problems with your Dell E173FPb 17" TFT LCD Monitor ?

Liteview lm15w tft monitor model goes blank

\015 When i turn on pc and monitor, the picture appears for a second and screen goes blank, power is still on, i turn it off (the monitor) and on samething happens again. I also noticed in many months that the monitor makes a zzzz noise or something similar . \015\012Moreover, befoire this happend ,if i moved the monitor slightly i used to lose picture and i had to try to put the cable in the ac input at the back of the monitor in the correct way, when i am inserting it i noticed some noise and it takes me 5 minutes to find the correct positon. I have tried different a cable and the problems persist , i would appreciate some advice although i am no expert i would like to fix it.\015

Answers :

I also have this monitor but mine has lost all power, tried different socket and fuse but to no avail...any ideas plz. thx in advance
It sounds like the port where the power cable plugs into is loose and shorting out. You may be able to dis-assemble the monitor and repair or replace the port. They are usually soldered in and the solder connection may have come loose. If it plus into the circuit board you might be able to fix the plug or tighten the screw if it is held by one.
Repair Help & Product Troubleshooting for Dell E173FPb 17" TFT LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Liteview lm15w tft monitor model goes blank

I also have this monitor but mine has lost all power, tried different socket and fuse but to no avail...any ideas plz. thx in advance ... Dell E173FPb 17" TFT LCD Monitor

Computer Monitor Goes Blank

This trouble maybe power supply or inverter boards is defective.\012 first you can test the voltage of the multr,and then check which part is defective.From Wisiny.com can find those parts\012 if you have any question,please let us know email ... Proview PL926WBi 19" LCD Monitor

Monitor goes blank

I was thinking about your problem, I just had a similar issue and the problem is that the inverter or the power supply with an embedded inverter had gone bad.The reason it goes black is because the inverter fails to provide power to the L ... Gateway FPD 1730 17" Flat Panel LCD Monitor

My HP monitor (f50) has malfunctioned

Try these 2 steps if they don't work get back to me :)Step 1. Connect the video cable and turn on the computer. What happens?\015\012 \015\012\015\012 \015\012\015\012 ... HP Pavilion F50 17" Flat Panel LCD Monitor

Gateway Monitor goes blank after a few seconds after startup.

Sounds like the inverter is broken or have a short circuit. This is a common failure on TFT displays.Here is a website explaining this kind of failure: ... Gateway FPD2275W LCD Monitor

Hp pavilion f1930 shows pic for 2 secs. then blank

Rather than guessing, or blaming the computer, I fix the F1903 backlight problem. Power the monitor and using a bright flashlight check the screen to ensure there's an image, or the menu when you press the menu button. Nearly every one of the F1703 a ... HP Pavilion F1903 19" Flat Panel LCD Monitor

Monitor displays breifly then goes to blank screen

I am not familiar with your particular model, but I do know what the problem is.\015\012The inverter that runs the lights behind the screen is faulty and needs to be repaired. The lights shine from the top and bottom and reflect outwards throug ... Sceptre X7GNAGAV 17" LCD Monitor

Emachines model 780 monitor comes on for one second then goes blank

I have a Similar issue with an emachines monitor..after trying a few things such as trying it on a different computer...changing cables and changing power cords..also turned the brightness up all the way...you can faintly see the windows screen on th ... E-Machines eMachines Desktop PC

Faint green discoloured screen then screen is blank

Sounds like one of your florescent tubes have died. THe power circuit is trying to start it but fails then shuts down ... Hanns.G Corporation JW-199DPB 19" LCD Monitor

The monitor goes blank after just a few seconds or sometimes works for hours.

Two possible causes are bad capacitors or a bad light inside the LCD panel.\015\012\015\012Open the unit and check to see if any of the capacitors in the power supplyor other boards look domed or vented on the top.\015\012\015 ... ViewSonic VX924 19" LCD Monitor

The monitor goes blank after just a few seconds or sometimes works for hours.

The monitor goes blank after just a few seconds or sometimes works for hours?\012 This trouble maybe power supply or inverter boards is defective.\012 first you can test the voltage of the multr,and then check which part is defective.From Wisiny. ... KDS K717s 17" LCD Monitor

Monitor goes blank after seeing XP during boot up.

Did u replace the video card with the same kind of model ? i guess yes ... when system starts hit the f8 key and than go in to safe mode ... mouse wont work so use arrow on the keyboard .. and in the safe mode just log in to admin account if availabl ... HP Pavilion a305w (DM181AR) PC Desktop

Monitor goes blank after it comes on for two seconds

Bad capacitors on the power board internal to the monitor they need to be replaced, let me know what you would like to do ... Gateway FPD2275W LCD Monitor

Monitor keeps blank even the power lLED is on green

I suspect the problem is with the monitor itself. I have had the same problem. I reported it to Dell and they sent me a new monitor within a few days the problem resurfaced again on the new monitor. They have since sent me a new monitor and the probl ... Philips 105S51 15" CRT Monitor

Monitor turns off after 4-5 seconds

Hi every one, i hope this helps and am proud to say/or not that i am now using my philips php-19x (aka proview 900w/Mag LT916s Model 900p/ Xerox) and yes turn on the monitor 2 seconds screen goes black and the ... Computer Monitors

Monitor goes blank (black) after some seconds, power light stays on

Change to new monitor \015\012Vitally ... Acer AL1711FB (Black) Monitor

Dell E173FPb 17" TFT LCD Flatpanel

Video cards that can handle two monitors at the same time have cables with two plugs on the monitor end.If your video cable has two plugs on the monitor end, try the other plug. ... Dell E173FPb 17" TFT LCD Monitor

After starup monitor goes to blank screen

Have you tried this on more than one PC with the same results?It sounds like one of 3 things...1: Power supply bad. really not much sense in replacing, since the cost of a new LCD is comparable2. if you have tried this o ... Sceptre X9g-Gamer (Black) 19 in. Flat Panel LCD Monitor

I have a gateway FPD2485W tft lcd monitor and i start my monitor and after it shows gateway it then goes black. How can this be fixed

Bonannorl, Maybe it can be fixed. You did not give any history of unit. Only "now" stuff. Is unit covered by Gateway warranty? How old is unit? Date of manufacture? Did unit work fine connected to your pc and this black or black n blank screen thing ... Gateway Computer Monitors

I have a Soyo Monitor, Model MT-NI-DYLM1998. It had been working OK, but I put my computer in storage for 2 weeks and then tried to reconnect. The Soyo monitor stays blank (black) except when it is turned on, the monitor shows a picture for 2 seconds and then goes blank again. I run windows XP with the latest update. It appears to be hooked up correctly. It does not come on when I move the wire in, only when the monitor is turned on, and then only for a few seconds. Any ideas? Robert Burlingame

I have encountered this same issue with a monitor like yours its very common especially for lcd monitors there is a bad diode on your monitor board and you will not be able to fix this yourself you can buy another or use just a regular crt monitor or ... Soyo DYLM1998 Monitor

Monitor Problem I'm having problems with my LG Flatron L1930B Monitor that I purchased a little over a year ago. . When the computer is shut off for a while and then turned on, the monitor will not automatically come back on. If you push the on-off button on the monitor, you can see the picture for a fraction of a second and the screen then goes blank. By playing with the off-on button for sometimes 15 minutes, the picture will return. If I don't shut the computer off, the monitor

HI..\015\012\015\012Have you double checked that all your connections are properly tightened and connected in right slots? just trying to look at obvious things first.. if you have another monitor, i would try and hook that up and see if ... LG Flatron L1951S 19" LCD Flat Panel Monitor

Relisys Monitor model TL528A - Plug it in, screen is blank panel light is yellow. push ON button and I get a 5 second message stating: OUT OF RANGE HS: 53.5 KHz VS: 84.8 HZ WORK RANGE HS 31.5-60 KHz VS: 56-75 Hz Then the screen goes blank and the panel light returns to yellow. What does this mean and can I repair it? I am pretty handy with electronic and mechanical repairs.

It normally means that you have connected the monitor to a computer whose resolution and frequency are beyond the range that this monitor are capable of.\015\012\015\012To fix this, you can do one of two things: reconnect the old monitor ... PC Desktops

My Acer LCD Monitor AL1707A goes blank after 2 seconds

Try this,\012When laptop on booting immediately press del.And the screen will run normally.But if the screen is still white, force to press power button soon.And it will shutting down.After shutting down, repeat this act ... Acer Computer Monitors

Hp vs17e monitor says it's in sleep mode then goes blank

Check the board postings for the HP f1903 monitor.I recall seeing a problem of the same there and a solution or fix. As it is only a newer version of the same model, it may be the same fix. Appears HP has a big problem with QA and this particular m ... HP Pavilion F1703 17" LCD Monitor

Optiquest Q19wb monitor goes blank after power-up.......?

... ViewSonic Optiquest Q19wb LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5557 seconds