Having problems with your Dell E173FP 17" LCD Monitor ?

Monitor auto adjust problem

\015 I have a monitor attached to my laptop and it keeps auto adjusting every second or so. I have tigthened, loosened, changed cable, etc. but still having problems\015

Answers :

It sounds as though the autoadjust button (switch) has stuck. Try tapping it a few times (the button, that is!)
Repair Help & Product Troubleshooting for Dell E173FP 17" LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Colors are off after auto adjust


I seem to have found the solution (and the cause, perhaps?) for this problem!I was having the EXACT same problem with a monitor I'm repairing for a friend. The capacitors on the power supply board were blown (CapXon capacitors, who'd've g ... AOpen 19" LCD

Planar 2010M auto adjust


This may be related to a power supply problem that these monitor have.\015\012 \015\012I think you need to fix the power supply board inside the display itself. It's giving the logic board and backlights fluctuating power and they have w ... Planar PL2010M 20" Flat Panel LCD Monitor

Auto adjustment. An annoying problem I can't seem to solve. Once in a while my monitor feels it is time for an automatic 'auto adjustment'. Sometimes for more then an hour, sometimes for several days. That blue screen in the middle of my screen is terrible annoying. After a while it goes automaticly away. Only to reappear a few days, weeks or months later. Thanks for helping.


After getting some clues from some posts on here I found an easy solution.Take the back off the monitor- 4screws.Unscrew the 3 fixing screws holding the little circuit board with the control panel buttons. Unplug the two long multiwire circui ... Neovo F-417 17" LCD Monitor

Always says: Auto Image Adjust


These are the allowable resolutions and refresh frequencies for your monitor.\015\012\015\0121280 x 1024 @ 60, 75 Hz\015\0121024 x 768 @ 60, 70, 72, 75 Hz\015\012800 x 600 @ 56, 60, 72, 75 Hz\015\012640 x 480 @ 60, 75 Hz\015\012720 x 400 @ 70 Hz\015\ ... ViewSonic VA703B LCD Monitor

X2Gen MW19U: Start "Auto Adjusting"


This sounds like a straight hardware issue. However, to be certain, try to attach another monitor to this PC, and if it works properly, you will know that there is nothing wrong with the graphics card/driver or other related component of the PC invol ... X2Gen MG19MY 19" LCD Monitor

Computer monitor my viewsonic 19" monitor shuts its self off no matter what computer i plugg it into ive tried 5 different computers and all it does is display the desktop for about 3 seconds then says auto adjust then the screen sought of distorts a bit and goes black and stays off, any ideas?


If one of those 5 computers has a working monitor,\015\012set the device-resolution to 800-by-600 and the refresh-rate to 60 Hz.\015\012\015\012Then, disconnect the "working" monitor, and connect the "problem" monitor.\015\012 ... Computer Monitors

Need to Auto Adjust Envision 20" monitor every time


Yes it may be a memory problem inside the monitor replace the memory from technical person \015\012or refer the manual with the monitor some trick may given so that push menu twotimes or operate like mobole button ... Proview PX-986 19" CRT Monitor

Samsung 731N Auto Adjustment


Samsung told me to push the menu button and then the one with the arrow on it (4 fromt he left) and hold that one down for like 20 seconds. It seemed to work but I am not sure, we will see if it continues to work, if not they said they will get it r ... Computer Monitors

Menu screen appears all the time, flashes through different categories


I tried cleaning the plate as suggested but had the same problem. So I decided to see what would happen if I disconnected the button board all together. I haven't had a problem since. I don't know if this is a good idea or not but it worked for me. Y ... Neovo F-417 17" LCD Monitor

Samsung 913n on off button problem..


... Samsung SyncMaster 913N 19" LCD Monitor

Screen monitor images on the righ side is not showig.


Hi afcarrillo,This could be a simple resolution problem. By that I mean that the resolution is set too low, therefore putting things off screen. Here's how you change the resolution:Windows XP Right click the Deskt ... Acer Computer Monitors

Flickeing like a dying fluorescent light bulb


Actually this is a 'warning' signal from your lcd monitor. The problem is your lcd ccfl lamp are near to their life, need to change. The ccfl lamp like our home fluorescent lamp, when the lamp need to dead, the lamp will flickering first, after some ... Samsung SyncMaster 710N 17" LCD Monitor

Auto adjust The auto adjust on my Dell E176FP 17" monitor doesn't stop. It keeps auto adjusting constantly. How do I stop this. I have to reset the bits to 32 and the resolution to 1024x768 in the graphics very often.


Hi, In case you have connected both the DVI and VGA cables to the back monitor can cause this problem. Try unplugging one of the cables and check if the problem gets resolved ... Dell E176FP 17" LCD Monitor

I have a syncmaster 740B monitor with ghosting problems. Have tried adjusting via the monitor controls, including reset & auto but to no avail. Resolution is set to 1280 x 1028, 32 bit. Other details on the display are: CX721B(Analogue)on WinFast A180 DDL. When using "Auto" to adjust the image ends half way up the screen & requires manual adjustment to bring it bacik nto view. I can live with that, but the ghosting is a problem. Any tips?


Try to replace the cable connected to your monitor,may be there is only a loose connection.if you have another PC,try it to another pc. ... PC Desktops

Benq screen resolution auto adjust seems to auto adjust wrongly


I would recommend you to bring it back and get a new one, if its till\015\012under warranty. You cannot fix the problem on the panel buttons it\015\012looks something to do with the components in the circuit bord. ... BenQ FP731 17" LCD Monitor

Auto Adjust Every time I turn off and then turn on my Monitor it auto adjusts. Also if I restart my computer again it auto adjusts at the start up. How can I disable the auto adjust feature?


I have found a way to stop flickering of auto adjust - press the menu key on your monitor -factory reset-menu button-all settings. That has solved my problem and hope it helps you. ... ASUS VW192S Monitor

Dell E196FP TCo99 Monitor screen problems


The screen colour changing is apparently an auto test procedure on the monitor and was prompted by a fault with the monitor not automatically shutting down when the computer is shut down. The settings on the monitor have been adjusted to rectify thi ... Dell E196FP 19" LCD Monitor

Monitor message i cannot remove "processing auto config message from screen display"


The monitor is stuck processing the auto adjustment. This is a problem with the minotr itself only and has nothing to do with your computer having a problem.\015\012\015\012Unplug the monitor from everything and then turn it off, let it ... Gateway FPD1530 15" TFT LCD Flat Panel Monitor

I have a Dell monitor and the text is blurry and fuzzy, how do I fix this?


This is actually from dell support website.. hope it will correct your problem...\015\012\015\012\015\0121 Ensure the correct resolution is set for the monitor. Flat panel monitors display the sharpest, clearest images when set ... Gateway FPD2275W LCD Monitor

Problem in Auto adjust mode


Auto Adjust work on the basis of resolution to which Windows set. It occurs mostly if Video drivers are not installed. Please check and install video drivers and also try to change screen resolutions from display properties in control panel..... ... Dell E176FP 17" LCD Monitor

Benq monitor keeps auto adjusting over and over. help!!!


The problem may be that the computer video is on a setting that is out of range for the monitor. To quickly test this, boot to the setup screen. If it is ok, that is your problem. If it still keeps auto adjusting, there is probably a bad component in ... Computer Monitors

I have a ViewSonic Monitor, model number Vs11307. The screen is all blurred and the screen isn't adjusting properly. The screen is shifted to the right and I have a blank rectangle at the left side. I tried auto image adjust and manual image adjust, but nothing seems to be working as I want it to.


I had the same problem same model. The image was off center to the right and it couldn't be fixed by the auto-image adjust or the manual adjust. My solution was really simple, I moved a video player (RealPlayer) onto the monitor and max ... ViewSonic PC Desktops

Computer monitor keeps auto adjusting screen


I have a Benq that was continually auto adjusting, I used electronic cleaner spray on all the controls (a good spray) and now there is no problem, suspect the controls were sticking, especially the on/off and the auto adjust button ... Computer Monitors

Not true color


I seem to have found the solution (and the cause, perhaps?) for this problem!I was having the EXACT same problem with a monitor I'm repairing for a friend. The capacitors on the power supply board were blown (CapXon capacitors, who'd've g ... AOpen 19" LCD
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.7523 seconds