Having problems with your Dell Dimension 8300 PC Desktop ?

Dell Dimension 8300 - Can't Boot from XP Disk

\015 Greetings All,I am having a problem with a Dell Dimension 8300 that I am trying to reinstall Win XP.The desktop has the factory DVD-ROM and CD-ROM drive.I just changed the hard drive because the original died.The\015\012drive type is IDE with the jumper setting set to CS like the original.\015\012It is a 40GB drive (like original) that I know works because I removed\015\012it from another system.When I attempt to boot from the XP CD,\015\012the disc is not read. Instead I get a message that says to hit F1 to\015\012retry, and F2 for setup (BIOS Setup). In covering all the bases, I've tried this on both the DVD and CD drive.In BIOS, I have tried a number of different options in forcing boot from CD.*Moved the CD-ROM was the first boot device.*Removed the hard drive from the boot order *Upon startup, hit F12 for boot menu and select CD-ROM.*Replaced the CD-ROM drive with a known working CD-ROM drive from another system.I've also reset the BIOS to make sure that I am running off default settings.At this point, I am out of options.I know my CD works, for I have used it before; especially recently; yet I haven't a clue why this 8300 just remains stubborn.Any help or insight would be greatly appreciated.Thanks! \015

Answers :

When in doubt do without, that is remove the new hard drive cable and power, remove the DVD drive and try loading booting the XP from just this CD device. Enter the BIOS and check if the system sees the device. If it's not found in the BIOS then you'll never boot anything. Address it as the Primary device on the cable (I don't use CS) and see if the BIOS sees it.
\015\012If you get CD device seen in the BIOS then try to boot the CD in it. If it boots then power off and connect up your 40gb drive (optioned as Primary) on the other cable. Now power on as check the BIOS for the drive and the DVD device. If both are seen then boot the cd and try to load XP. After it's up and running install the other CD device as a Slave on one of the cables.
Repair Help & Product Troubleshooting for Dell Dimension 8300 PC Desktop

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Having Trouble Reinstalling XP on my Dell Dimension 3000

Is the "New" HD in the system presently? If not install it. Boot from the original XP Restore disk (CD/DVD). When you get Windows going (from CD) go to COMPUTER and format your C: drive. Once this is done go ahead and run the Restore from the ori ... Dell Dimension 3000 PC Desktop

Dell Dimension 5150 (& WinXP) - failure to boot up

You could try booting into safe mode, then you could try a system restorelook for the F8 option at the bottom after the first boot window, youll know youve got it when you get the option to boot into safe mode, if this works you sho ... Dell Dimension 5150 (DIM515MIN) PC Desktop

Blank screen after boot up

This issue may occur if one of the following conditions is true: \015\012Cause 1\015\012\015\012 loadTOCNode(3, 'cause');\015\012 \015\012This issue may occur if you have a CD, a DVD or a floppy disk in your CD, DVD, or floppy drive ... Dell Dimension 3000 PC Desktop

RAID-1 failure on Dell Dimension 9100 Desktop

Since you are using RAID 1 (Mirroring) you will only need to send one drive for data recovery.\015\012\015\012Since the Dimension 9100 uses SATA HDDs yes you can increase the storage capacity up to a matched pair of 650GB drives. I'd suggest ... Dell Dimension 9100 PC Desktop

My dell 5150 dimension will not boot up and says no boot device available. I have gone into system setup and tried a few things and at one point got a message that said drive 0 not found and now it is back to no boot drive.

Go back to setup and check your boot sequence. It may not be looking for your hard disk. Do you know what Hard disk you have? It may not be wired in there properly if it's in the boot sequence. Set DVD/CD to 1st boot device and put in your installati ... Dell OptiPlex GX280 PC Desktop

Hard Drive I replaced the factory Hard drive from Dell because they said my old hard drive was bad. Dell also mailed me a burned CD that said Dimension 4600 on it. Once I got the hard drive installed. I turned on my computer and I didn't know what CD to put in. I got a message that said "Primary Drive 0 found" Then I entered the Dimension 4600 CD and pressed F1 and it said do I want to boot from a hard disk or CD Rom, I chose CD and then I had a list of 5 choices, I tried a couple of them an

Put the CD in your CD Drive and shut off the pc.\015\012\015\012Then start it up again making sure the CD is still in the drive.\015\012\015\012You will then be asked if you want to boot from CD. Press any key to confirm this (it might skip asking y ... Dell Dimension 4600 PC Desktop

Primary hard disk drive 0 not found

The first thing to try is removing and reseating the hard drive. Sometimes the drive just looses it's connection with the motherboard, reseating can resolve that.If that doesn't work, you can get a 2.5 in USB hard drive enclosure, and se ... Dell Inspiron 6400 Notebook

DELL DIMENSION 2400 ERROR STOP: 0x00000024, (0x00100203,0X82F898

You seem to have an error in the boot sequence of the Operating system. If you are unable to access the safte mode of the OS, then you will have to do a hard boot (boot from disk). My suggestion is seeing that you have a Dell, many times they will g ... Dell Dimension 2400 PC Desktop

Dell Dimension 5150 probably software conflict

You will need to get hold of a full copy of XP off of a friend, as the copy that prob came with your pc will judt format your pc and start again. Dont worry about codes as your should find one at the side of your pc. you just need to make sure you ge ... Dell Dimension 5150 (DIM515MIN) PC Desktop

How do i format it

Process for Windows XP Re-installationWINDOWS RE-INSTALLATION WILL WIPE OFF ALL THE DATA.1. Insert Windows XP operating System Disk In The CD Drive.2. Shut Down The system.3. Disconnect Everythi ... Dell Dimension 4600 PC Desktop

Bios screen freezes at startup

Go to bios/set up and check in advanced set up and select the first boot device as HDD 0 or HDD 1 (hard disk 0 or 1) and also you need to see that the hard disk is seen in the bios, save and qite. if it is the same reinstall the operating system ... Dell Dimension 5100 (D51L1) PC Desktop

Cannot boot my dell dimension 3000

Look at this link read carefull and try again http://www.goodells.net/dellrestore/fixes.htm ... Dell Dimension 3000 PC Desktop

Dell XPS w/Mirrored drives. No C drive when using boot disk.

As RAID uses block for block copy, a re-sync when adding in a new mirror on RAID 1 will take some time, and system performance will be affected during that time period. There is no indication in windows if the rebuild is complete as this is bei ... Dell My XPS M2010 Notebook

Restoring computer factory settings

Another suggestion is boot the system from your OS disk, if you have one, and repair or reinstall OS. Reinstall should not cause you to loose any files. ... Dell Inspiron 531s Desktop Computer

No boot device available

Make sure all the connections to the Hard Drive are tight and secure. Then see if it will boot. If not then try loading a windows cd and see if it detects the Hard drive. If it does not the hard drive is no good if it does try running the automated s ... Dell Dimension 4400 PC Desktop

Computer will not boot.

Form the info you provided, you have a RAID (Redundant Array of Independent Disks) disk array. RAID 0 (striped disks) distributes data across several disks in a way that gives impro ... PC Desktops

Will not boot has a win32 sys error - Dell Latitude C610 Notebook

Hihere is the solutionplease do it carefullysolution 1If you have a new Dell system which belongs to the Dimension family -\015\012you could either repair/reinstall the OS using the XP reinstall disk\015\012that ca ... Dell Latitude C610 Notebook

Computer has frozen on windows logo

1) Which version of Windows ? For the following discussion I am assuming it is 2000, XP or higher. You may also want to print this, it's long.2) Is this this the low resolution Windows logo on the black scre ... Fujitsu Siemens SCALEO 600 (FSP:83C005617) PC Desktop

New HDD Install Prob

Basic Troubleshooting Tips after Installing a New Hard DriveBased on Seagate IDE hard drives.If you have installed your drive and it does not function properly, perform the following basic checks:Additional Troubleshooting Tip ... PC Desktops

Dell 2400 dimension

One thing to try is this:When the pc starts to boot up from the disk, and you get to the point where it asks which partition to install Windows, go ahead and delete all partitions (unless one has the restore image, or you just want to kee ... Dell Dimension 2400 PC Desktop

Cannot read disk - Dell Dimension 2400 PC Desktop

"A disk read error occured press Ctrl+Alt+del to restart " FOLLOW THE BELOW INSTRUCTIONS TO RUN DELL DIAGNOSTIC ON INTERNAL HDD Open the Dell Diagnostics on either your hard drive (F12) or from the Resource (Drivers and Utilities) CD. Running from th ... Dell Dimension 2400 PC Desktop

Will not boot - Dell Dimension 4300 PC Desktop

Windows Start-up Errors\015\012Step one, you need a Windows XP CD. If you only have a recovery disk set like the ones from HP or Compaq they will not do what you need done. Under normal circumstances however, you can use a De ... Dell Dimension 4300 PC Desktop


Hi,Based on your post/description, you have three (3) concerns:1. "master reset" - if you are ferring to the BIOS/CMOS, normally this would require that you open your PC and on the motherboard, temporarily move the jumper from 1-2 o ... Dell Dimension™ B110 PC Desktop

Dell Dimension 2400 - Adding second HD

I presume that the hard drives are ATA drives, and if the WD and Maxtor are installed on the same IDE cable then the boot drive, the WD HD needs to have the jumper set to Master or Master with Slave drive, and the Maxtor needs the jumper set to Slave ... Dell Dimension 2400 PC Desktop

Desktop problem hi, my computer shuts off a few times and when i turned it on worked again...last time it shuts off when i turned it on cant boot anymore - sata or any drives cant be found, bought a new hard disk and install but same error keeps popping up...what can be the problem?? i have dell dimension 8400

Maybe a dead cosm battery. ... PC Desktops
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.7627 seconds