Having problems with your Dell Dimension 8200 PC Desktop ?

Showing message out of range

\015 Just the message out of range on monitor.\015

Answers :

"Out Of Range" is more than just resolution. It means your video adapter is set to a resolution/refresh rate setting that is outside the range of supported signals.
\012
\012Go into your Video Adapter's settings, look at resolution then the refresh rate (Hertz), and compare to those supported by the monitor.
\012
\012When I had a similar problem, I noticed that somehow, the refresh rate was set at 59HZ which is unsupported. After changing to 60HZ (which is supported) the problem went away.
Your monitor settings within windows are set too high for the monitor to display... When computer first boots.. be ready and press the F8 key...
\015\012Enter safe mode.. Reset the display properties in control panel to 800 by 600 for a start. Setting the resolution too high past the monitors ability will give you that message.. Most monitors are able to display 1024 by 768 just fine.. Out of range.. means the display settings within windows are out of the monitors range of ability to display the screen resolution you have set... Good luck!!
Repair Help & Product Troubleshooting for Dell Dimension 8200 PC Desktop

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have aoc monitor the problem is out of range


Describe your AOC S7M51, 17 in. CRT Monitor Problem. with external TV Tuner card connected, Message shows "Warning, Not Support, Out of range" and with CPU connected, the same message shows from the booting... ??? are AOC monitors trusted for the ef ... AOC CT720G 17" CRT Monitor

DELL E153FPf doesn't show the image


OSD Warning Messages\015\012A warning message may appear on the screen indicating \015\012 that the monitor is out of sync range.\015\012\015\012 \015\012\015\012 \015\012 \015\012 \015\012 Cannot \015\012 Display This Video ... Dell E153FPf 15" TFT LCD Flat Panel Monitor

Out of Range message displays when PC boots


To resolve this behavior, either change the refresh rate, or change the video adapter settings.\015\012To change the refresh rate:\015\012\015\012Restart\015\012the computer, and while it is restarting, press F8 ... Westinghouse 22" Widescreen LCD Flat Panel Monitor

An Out of range box


Frankr2327\015\012\015\012If you are getting this message this means that you are connecting a device to the monitor and/or a connection that is putting out a signal that is not supported but the monitor. You may also need to look at the ... Envision Computer Monitors

At start up it displays a message "frequency out of range" please change the display mode to 1280 x 1024 with 60Hz, any idea why its doing this and how to solve this issue so i can log back on to wind


Ok you may do soluton #1 make monitor show windows start. then enter windows-->enter control panel --> display--> setting --> monitor -->\015\012choose the refrash frequency to lower stage (at least 60 Hz)\015\012until no m ... Princeton Digital VL1919 19" Monitor

Hi I get a "signal out of range" message until windows xp starts. This means I can't get into safe mode or see start up messages. Any ideas please?


You see "Signal Out of Range" does not mean you cannot go to Safe mode or see startup messages. It shows up when you dont have a display. The refresh rate of your monitor is a little slow. So when you wana go to safe mode, press the Power button and ... HP L1955 19" LCD Monitor

Showing message out of range


"Out Of Range" is more than just resolution. It means your video adapter is set to a resolution/refresh rate setting that is outside the range of supported signals.\012\012Go into your Video Adapter's settings, look at resolution then the ref ... Dell Dimension 8200 PC Desktop

Intstalled starlogic moniter to PC and got error message


Hi,\015\012the "Out of Range" message usually appears when the video card is putting out a video resolution or frequency that the monitor isn't able to handle. You should reboot your computer and BEFORE the Windows screen shows up, press the F ... Computer Monitors

Screen shows different colour grids when starting then goes black with message in right corner "out of range"


Hello ssi1,This happens when your screen resolution is set to something higher\015\012than what your monitor can display. For example, if your monitor\015\012supports resolutions of up to 1024x768 and your video card allows you\015\012to ... PC Desktops

What does out of range mean on my asus lcd monitor i am trying to hook up my ps3 through my vga port


Out of range is comes when the monitor is not working with the cpu. May be you are not connected it well . and you can see the message out of range when the operating system is shut down.If it shows message when the cpu running please connect the vga ... PC Desktops

Gateway FPD1530 loses image shortly after powering up.


Try booting into safe mode. press F8 while the computer is booting. see if everything stays normal. It should tell you that it booted into safe mode. Once there, change the resolution or the frequency of the display(also known as the refresh rate) by ... Computer Monitors

"Input signal out of range"


Update ur driver ... HP w2207 Monitor

Frequency out of range 11khz/ 119khz message


The PC is sending out the resolution that is too high for the monitor to handle, you need to set the resolution of the PC to be the native resolution of the monitor and set the refesh rate to be at 60Hz. ... Envision H191W Monitor

Outof Range error message & black screen


To resolve this behavior, either change the refresh rate which is what is chnaged or the resolution or change the video adapter settings.\015\012 \015\012\015\012To change the refresh rate:\015\012\015\012 ... HP L1940 19" LCD Monitor

Over range message on monitor


Switch on the computer then press F8 F8 contineusly then highlight on safe mode press enter then display will see if you want to work on high resolution then attatch external display card and best will be AGP card then you can watch movie much clear ... Proview PL926WBi 19" LCD Monitor

I changed Desktop resolution setting to higher, Monitor went black with "Out of Range" message


Please try this:\015\012To resolve this behavior, either change the refresh rate, or change the video adapter settings.To change the refresh rate:1. Restart the computer, and while it is restarting, press F8 until the St ... Planar PL1910M (Black) 19 in. Flat Panel LCD Monitor

Signal out of range


1: Signal out of range meas the monitor can't handle the input refresh rate. lcd and Tft monitors usually supports 60 and 75Hz refresh rates.2: The Resolution you are using to view the desktop is too high, this number is depending on the size o ... Kogi L7CH Monitor

"No signal detected" when LCD connected with DVI-D Cable


Thank you for providing your configuration details.\015\012You have failed to specify wheather or not your LCD Display is under Warrenty.\015\012\015\012Perhaps these simple trouble shooting procedures will get the job done.\0 ... BenQ FP71E 17" LCD Monitor

Unable to Calibrate: Dell E153FPT


CHECK THE DRIVERS OF THE MONITOR, TRY TO UPDATE THE DRIVES\015\012RESETING THE REFRESH RATE LOWER THAN IT IS NOW\015\012IS THE RESET BUTTON THAT WILL SET THE MONITOR BACK THE THE MANUFACTURE ORIGNAL SETTING,\015\012\015\012THA ... Dell E153FPT 15" Flat Panel LCD Monitor

Attention out of range is displayed on ibm 2 74 monitor


To resolve this behavior, either change the refresh rate, or change the video adapter settings.\015\012To change the refresh rate:\015\012\015\012Restart\015\012the computer, and while it is restarting, press F8 ... IBM E74 17" CRT Monitor

Sims 3 keeps crashing


Maybe you have enough video memory, but the way your video card processes all the graphics is less than enough to what SIMS 3 requires.Please take a look at the sims 3 requirements and read the review about your laptop below. ... Dell Inspiron 6400 Notebook

In the middle of my screen a blue box is showing and in it this reads OUT OF RANGE H. FREQUENCY 68.7 KHz V. FREQUENCY 85.0Hz What does this mean and how can I fix it this was a gift...


That message appears when the Windoze display settings exceed the\015\012monitor capabilities. If you will boot into windoze safe mode (F8 at\015\012boot) and correct the display settings, the message should clear at the\015\012next boot. Afterwards ... Envision H22W 22" Monitor

Pro nitron monitor change range cant see mac on it after boot up message out of range shows


... Formac ProNitron 21/750 21 inch CRT Monitor

Envision EN 5100 E with Dell Inspiron 530...


You can try to reset your display settings... try 640x480 resolution 60Hz refresh rate this can be done in the control panel under display---settings tab..good luck.if that doesn't work I would just return it and ... Envision H170L Monitor

Monitor displays Msg. frequency out of range, screen is black


Start your computer and press the F8 when the manufacturer's logo screen is showing. This will bring you to the Windows startup menu. Pick "start in VGA mode" and windows will start up with video settings you monitor can handle. Then you can change y ... Compaq Computer Monitors
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3201 seconds