Having problems with your Dell Dimension 4600 PC Desktop ?

Computer in safe mode and monitor will go to sleep mode....help what can I do...my husband tried everything....

Answers :

First, Shotdown your computer from start ,
\015\012then remove your computer power, remove VGA cable, remove VGA power cable. then
\015\0121- connect vga cable to computer.
\015\0122- connect VGA power but do not power on.
\015\0123- connect computer power on but do not turn on
\015\0124- turn on computer first and 3 second turn on your lcd.
\015\012if NOT try powering on computer then Monitor then power the computer then monitor.
\015\012IF NONE worked, YOU may have LCD that need drivers from manufacturing, some newer models required that, Specially for vista.You may use older Monitor to get drivers to computer and extracted, then you may connected, you will have solved the problem.
Repair Help & Product Troubleshooting for Dell Dimension 4600 PC Desktop

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Computer in safe mode and monitor will go to sleep mode....help what can I do...my husband tried everything....

First, Shotdown your computer from start ,\015\012then remove your computer power, remove VGA cable, remove VGA power cable. then\015\0121- connect vga cable to computer.\015\0122- connect VGA power but do not power on.\015\01 ... Dell Dimension 4600 PC Desktop

My HP vs15? flat panel monitor is driving me nuts

Think yer gnna need to first install your monitor drivers,...if it didnt come with software, then look it up online,...then install uyer video card drivers if u have a video card,..., also download the manuals,..pdf,...fer each. if u dont mind the re ... HP Pavilion F1503 15" LCD Flat Panel Monitor

Wont work with new computer

Since this was a new out of the box computer, Safe Mode was not allowed. In order to change monitor settings (resolution), I had to use another monitor, in this case a newer CRT. With the CRT, the computer booted up, no problem. Once booted, I turned ... Princeton Digital VL173 Monitor

LG screen goes in stand by. I was using two monitors for several months, everything OK, now I decided to get a new LG Flatron instead of one of the monitors... and only this one goes in safe mode!! Two screens plugged in: Philips analogical working fine no problems. New LG Flatron digital goes in power save mode after few minutes Tried to plug in ONLY the LG, same problem after few minutes. Philips monitor no problems. So it HAS to be a screen function or problem of the LG? Computer: AMD + 3Ghz

Oke having a similar problem atm, this is what i have found so far. was trying to help a friend who has bought the same 19" LG monitor. When i connected the monitor to her PC i noticed that it was not the same connection as the previous one but it ha ... LG 19" Widescreen Flat Panel LCD Monitor

Hp f2105 monitor goes immediately to sleep mode

Sounds like your monitor is not processing the resolution signal from the graphics card. Reboot the computer in "safe mode with networking", from there you can play around with the resolution, start low resolution and work your way up to test the mon ... HP f2105 21" LCD Monitor

When the computer is turned on the monitor goes to sleep mode

Go to safe mode,select boot in vga mode.\015\012\015\012If this allows you to start,\015\012\015\012Click start,Run type desk.cplScreen Saver tab | click on EnergyUnder desk or office settings frame, set all values ... Computer Monitors

My computer wont open windows

Step 1: Removing recently added hardware\015\012Use the steps in this section to disconnect any recently added hardware and test for the error. \015\012NOTE: If a new internal device (sound card, hard drive, or other) was ad ... Compaq Presario 5000 PC Desktop

Cannot get monitor out of sleep mode

About 90% of the time this is a cable problem. Check the connection on both ends. Make sure the cable is firmly seated. If it is, pull out the cable and check the ends to make sure that none of the pins are bent. If so, straighten the pin back out an ... HP PC Desktops

Can't switch on monitor screen

You must go into the BIOS of you computer and turn off the sleep mode and also in windows. Disconnect the monitor and power it on without hooking it up to the computer. If the monitor turn on and is working , then hook it up to the computer and try w ... Mag Innovision LT776s 17" LCD Monitor

Emachine T2385 Won't Boot in Normal Mode past Windows XP Screen

The first thing I would check is your video card (usually driver) problem. Start windows in safemode with networking. If this problem has occured after updating the video card driver you may try rolling back the driver to a previous version, otherw ... E-Machines Celeron 2.3GHz (rb-t2385)

22" Hanns G can't config..driver issue? Some of the pages look ok but the resolution is maxed at 1680 x 1050 (per tec support) and although it real sharp everything is like 14 point.

Recent Hardware Changes. Corrupt drivers for any recently installed hardware can crash the system. To get rid of the corrupted drivers, do the following:a. Uninstall all recently added hardware. b. Try to restore the system t ... Microsoft ChiMei CMV938D 19" Widescreen LCD Monitor

Acer Aspire 5520 screen and NVIDIA driver problems

Its a hardware issue, and why its your motherboard on laptop have a problem, not physically but i think your try to re-update your BIOS to clear out all the malfunction chips inside your laptop. This problem was actually i encountered before but no o ... Acer LXA3706003 Notebook

Monitor keeps stating "monitor going to sleep" now awhile after booting up. The monitor works fine with other computers and the computer in questioning when in safe mode - yet if tried to boot normally, the monitor says going to sleep. Recently, I used that monitor to work on another PC but didn't touch the now affected one - but after plugging it back into the old one.. this is the issue

This is probably a video setting issue. In Safe Mode, Windows starts with low resolution and color settings, so the monitor can display them. But when it tries to start normally, Windows is using a video setting the monitor can't handle.S ... Compaq FS7600 17" Flat Glass Monitor

My monitor goes to sleep mode at startup & can't access safe mode

Turn the computer off, open the case and remove the RAM. Does the computer beep when you turn it on with no RAM? If not, your motherboard is dead. If your computer beeps, turn it off again and try putting one stick of RAM in. If the co ... E-Machines eMachines Desktop PC

I believe I just got a virus on my computer. its an HP comp

Seems like a video issue. \015\0121. Check to see that the video cable is plugged in to the back of the computer and the monitor securely. If it is not check to see that the pins on both ends of the video cable are not bent o ... HP Pavilion a1610n PC Desktop

I was adjusting picture on monitor and now picture completely messed up

\015\012Signal out of\015\012\011\011 Range.\015\012Out Of Scan Range\015\012Horizontal frequency is out of range.\015\012Cannot Display This Video M ... IBM E74 17" CRT Monitor

Gibberish + won't finish loading Windows

Remove the new memory first. if that does not help you may have some a virus, indicated by safe mode workng fine. One other thing i found would do that is a damaged Hard drive, not to likely here because safe mode works. ... Dell Dimension E521 PC Desktop

Monitor keep going into "sleep" mode

Try to reseat the memory modules and restart the computer and computer boots to normal mode/then go to power options in control panel and disable the sleep mode option for the hard disk ... Dell Dimension 3100 PC Desktop

Dell E228WFP Monitor failure

To me, that's an XP driver issue. If the screen turns on at all, then goes dark during XP boot, that's nearly a ringer for drivers. Out of range on the Hz? Tried booting in safe mode to see if it loads with standard win drivers? That migh ... Dell E228WFP LCD Monitor

I have a problem with my monitor hpw1907v

Not sure which windows you are using but on my Vista there is also a setting for power saving on the PCI Express video card. Have you tried changing that setting. Not sure if that would be the problem but worth a try. Mine is set for maximum power ... HP w1907 LCD Monitor

Problem w/Dell E176FPf monitor stuck in power save mode

Ok if it the monitor works fine on another unit discount it out of the equation as a monitor problem.I would suspect the driver on the PC that delivers the problem, especially the video card.. Check that the cable is also on tightly. remo ... Dell E153FP 15" LCD Monitor

My 15" LCD monitor TTX went to sleep mode and never return back

Mike_garzan, Your monitor will need some work done on it!! Do you know the "flashlight trick" that every owner of an LCD monitor with "cold cathode-fluorescent-lamps" should know how to do when the BLACK screen of death makes it presence known? Do th ... Elo TTX 9154 15 Inch LCD BLACK W/ RESISTIVE SERIAL Interface Monitor

Monitor Problem We Have the Princeton VL 173 Monitor and when we hooked it up to the computer the Monitor Turns on and trys to Load Windows XP and then The Message Appears that It is OUT OF Range and these Numbers Appears H 53.8 KHZ and V 85.2HZ and then Monitor goes into Sleep Mode.

That is because your computer is trying to display a picture at a higher resolution than the monitor can handle\015\012\015\012EG. if your monitor was only capable of lets say 800 x 600 and you deci ... Princeton Digital VL1916 19" LCD Monitor

Going to Sleep

Due to the power surge, it is highly possible that the monitor was given a boot by your computer on it's way out.\015\012\015\012This will short out a very small transistor inside the monitor on the video board and in turn, then monitor c ... HP Pavilion F1903 19" Flat Panel LCD Monitor

I have a Dell Inspiron 530

I have a Dell Inspiron 530S, and it exhibited the same symptoms as rguggemos's & Wilburollie's.I can put it to sleep, but when I try to wake it, it won't. The screen will stay black. I can hear the drives spin up, and the fans go on F ... HP Media Center m7060n PC Desktop
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 1.0151 seconds