Having problems with your Dell Dimension 4600 PC Desktop ?
My dell dimensions 4600 will not boot
\015 When starting up an alert message appears saying, "previous attempts at booting this system have failed at checkpoint [time]\015
Dont worry.This can be resolved.Goto the BIOS by tapping the F2 key on the restart\015\012-Goto the option which says Maintainence>>Event log>>Clear all even logs\015\012-Now press F10 to save and exit or press the ESC key just once and Select SAVE and EXIT
What operating system are you running? If Windows XP/Vista, have you tried restoring to a different restore point? You can get to that by pressing F8 just before you see the Windows start up screen appear.
\015\012If that doesn't work then I would try repairing your operating system from the CD.
\015\012If that doesn't work then I would try repairing your operating system from the CD.
Repair Help & Product Troubleshooting for Dell Dimension 4600 PC Desktop
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Having Trouble Reinstalling XP on my Dell Dimension 3000
Is the "New" HD in the system presently? If not install it. Boot from the original XP Restore disk (CD/DVD). When you get Windows going (from CD) go to COMPUTER and format your C: drive. Once this is done go ahead and run the Restore from the ori ... Dell Dimension 3000 PC Desktop
RAID-1 failure on Dell Dimension 9100 Desktop
Since you are using RAID 1 (Mirroring) you will only need to send one drive for data recovery.\015\012\015\012Since the Dimension 9100 uses SATA HDDs yes you can increase the storage capacity up to a matched pair of 650GB drives. I'd suggest ... Dell Dimension 9100 PC Desktop
Dell Dimension 8400, no post. B and D amber.
GYGY diagnostic lights -- Memory is detected, but a memory configuration or compatibility error exists, and the 1-3-2 beep sound indicates the MEMORY test failed, which means one of the four memory has gone bad or the one of the four slots on the mot ... Dell Dimension 8400 PC Desktop
Hard Drive I replaced the factory Hard drive from Dell because they said my old hard drive was bad. Dell also mailed me a burned CD that said Dimension 4600 on it. Once I got the hard drive installed. I turned on my computer and I didn't know what CD to put in. I got a message that said "Primary Drive 0 found" Then I entered the Dimension 4600 CD and pressed F1 and it said do I want to boot from a hard disk or CD Rom, I chose CD and then I had a list of 5 choices, I tried a couple of them an
Put the CD in your CD Drive and shut off the pc.\015\012\015\012Then start it up again making sure the CD is still in the drive.\015\012\015\012You will then be asked if you want to boot from CD. Press any key to confirm this (it might skip asking y ... Dell Dimension 4600 PC Desktop
Selected boot device is not available
Hi everyone, if someone still looks for the answer ... SATA CD/DVD drive worked for me. ... Dell Dimension 8400 PC Desktop
PC will not boot from CD drive
Disable the harddrive in the bios and set the cd to 1 boot.Check sometimes there are 2 cd drive .Cd-rom and the number or model of the dvd drive... ... Dell Dimension 4600 PC Desktop
Dell Dimension 4700 won't boot properly.
Disconnect the hard drive and the floppy drive cable at the mother board. The retry POST and try to clear up any problems in POST. If this works fine then the floppy drive cable is either reversed at the unit or the hard drive is jumpered wrong. ... Dell Dimension 4700 PC Desktop
How to disable on board sound card in dell dimension 8200
At the boot process press key F2 in order to get into the bios\012settings. Here you will find "Integrated Devices" select this line with\012the cursor keys (up and down) and press enter (or spacebar).\012On the new panel locate the option "sou ... Dell Dimension 8200 PC Desktop
How to disable on board sound - Dell Dimension 8200 PC Desktop
During the boot process press F2 in order to get into the bios settings. Here you will find "Integrated Devices" select this line with the cursor keys (up and down) and press enter (or spacebar).On the new panel locate the option "sound". It mu ... Dell Dimension 8200 PC Desktop
My dell 5150 dimension will not boot up and says no boot device available. I have gone into system setup and tried a few things and at one point got a message that said drive 0 not found and now it is back to no boot drive.
Go back to setup and check your boot sequence. It may not be looking for your hard disk. Do you know what Hard disk you have? It may not be wired in there properly if it's in the boot sequence. Set DVD/CD to 1st boot device and put in your installati ... Dell OptiPlex GX280 PC Desktop
Cannot boot my dell dimension 3000
Look at this link read carefull and try again http://www.goodells.net/dellrestore/fixes.htm ... Dell Dimension 3000 PC Desktop
No boot device available
Make sure all the connections to the Hard Drive are tight and secure. Then see if it will boot. If not then try loading a windows cd and see if it detects the Hard drive. If it does not the hard drive is no good if it does try running the automated s ... Dell Dimension 4400 PC Desktop
Dell Dimension 5100 power up problem
I had same issue with dimension 5100 Desktop. I work at Circuit City as the Lead Technician. I found that swapping the power supply did fix the problem! When i initially tested the power supply with a standard power supply tester, the power supply ... Dell Dimension 5100 (D51L1) PC Desktop
I installed a new WD hard drive and now upon boot
I would recommend you to change the CPU fan as it may nt be working fine and that should resolve the problem. ... Dell Dimension C521 PC Desktop
Bios screen freezes at startup
Go to bios/set up and check in advanced set up and select the first boot device as HDD 0 or HDD 1 (hard disk 0 or 1) and also you need to see that the hard disk is seen in the bios, save and qite. if it is the same reinstall the operating system ... Dell Dimension 5100 (D51L1) PC Desktop
Will not boot has a win32 sys error - Dell Latitude C610 Notebook
Hihere is the solutionplease do it carefullysolution 1If you have a new Dell system which belongs to the Dimension family -\015\012you could either repair/reinstall the OS using the XP reinstall disk\015\012that ca ... Dell Latitude C610 Notebook
Dell Poweredge 4300 Bootup problem after cmos battery replacement
Check the version for the Raid Controller. This may need to have the firmware to be upgraded. If the controller is removable, take the controller out and then see if the computer will continue past the bios. If the controller is built-in, then disabl ... PC Desktops
How do i format it
Process for Windows XP Re-installationWINDOWS RE-INSTALLATION WILL WIPE OFF ALL THE DATA.1. Insert Windows XP operating System Disk In The CD Drive.2. Shut Down The system.3. Disconnect Everythi ... Dell Dimension 4600 PC Desktop
DELL DIMENSION 2400 ERROR STOP: 0x00000024, (0x00100203,0X82F898
You seem to have an error in the boot sequence of the Operating system. If you are unable to access the safte mode of the OS, then you will have to do a hard boot (boot from disk). My suggestion is seeing that you have a Dell, many times they will g ... Dell Dimension 2400 PC Desktop
I am Having problem restoring my dell 2400
Well you may have a bad mother board or IDE port to which the HDD is connected. If the CD is connected to the same IDE channel as the HDD, move it to IDE1 which is the second IDE channel. If it then recognizes your CD, IDE0 is bad and you need to rep ... PC Desktops
UNMOUNTABLE______BOOT_____VOLUME ***Stop: 0 X
It could be a problem with the harddrive and memories ,if you enter the DELL bios setup page when the computer starts up does it have an option to test the hard drive if so test it.Also if you have two memory sticks then try with only one and v ... Compaq Presario 2195US Notebook
Cannot read disk - Dell Dimension 2400 PC Desktop
"A disk read error occured press Ctrl+Alt+del to restart " FOLLOW THE BELOW INSTRUCTIONS TO RUN DELL DIAGNOSTIC ON INTERNAL HDD Open the Dell Diagnostics on either your hard drive (F12) or from the Resource (Drivers and Utilities) CD. Running from th ... Dell Dimension 2400 PC Desktop
Dell dimension E310 wont boot
Hi,Go in bios and change the SATA mode to IDE or compaitibilty then check whether it is working or not ... Dell Dimension E310 PC Desktop
Dell Dimension 8300 - Can't Boot from XP Disk
When in doubt do without, that is remove the new hard drive cable and power, remove the DVD drive and try loading booting the XP from just this CD device. Enter the BIOS and check if the system sees the device. If it's not found in the BIOS then yo ... Dell Dimension 8300 PC Desktop
Re: your suggestion for my Dell Lattitude D600 Hard Drive Problem
Ok, now we have some good discourse! While I'd always prefer to use a friend's laptop to test my fringe hypotheses, having your own is a fine option too. And it sounds like you have an enclosure too, so you are pretty much all set. It's r ... PC Laptops