Having problems with your Dell Dimension 3000® Pentium® 4 2.8GHz, 256MB, 80GB, 48x CD-RW PC Desktop ?

Monitor goes blank less than a second after turning on.

\015 I start my computer and turn it on, and everything looks fine for about 1/4 of a second and then it goes black while leaving the power light green. I can only see the screen again after turning it off and on, but that's only for another 1/4 second. What's up?\015\012My dell monitor shuts off after a 1/2 secondf. I can pull up display by maually turning it off, then on. Is there a fix?\015

Answers :

Monitor is bad for sure. Try another known good monitor on your computer and if the problem stops then you know for sure the original monitor is bad. Hope this helps.

Repair Help & Product Troubleshooting for Dell Dimension 3000® Pentium® 4 2.8GHz, 256MB, 80GB, 48x CD-RW PC Desktop

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Monitor goes blank less than a second after turning on.


I start my computer and turn it on, and everything looks fine for about 1/4 of a second and then it goes black while leaving the power light green. I can only see the screen again after turning it off and on, but that's only for another 1/4 second. W ... Rosewill R700J 17" Flat Panel LCD Monitor

Monitor goes blank less than a second after turning on.


Sounds like either there is a bad connection from the computer to the monitor, or the monitor has a faulty power regulator, causing the monitor to overheat prematurely, and shut off. ... Proview PL926WBi 19" LCD Monitor

Monitor goes blank less than a second after turning on.


I have one an opened the unit. the power supply has an obvious burn mark on it. Looking FOr a replacement part to fix for less that $50 ... Proview PL926WBi 19" LCD Monitor

Monitor goes blank less than a second after turning on.


This is an easy problem to diagnose but not so easy to fix. the power inverter for the backlight is dead. this is a very common problem with lcd monitors, if it is a module they are usually range in price from $20-75. ... Mag Innovision LT982s 19" Flat Panel LCD Monitor

Monitor goes blank less than a second after turning on.


Monitor is bad for sure. Try another known good monitor on your computer and if the problem stops then you know for sure the original monitor is bad. Hope this helps. ... Dell Dimension 3000® Pentium® 4 2.8GHz, 256MB, 80GB, 48x CD-RW PC Desktop

Picture ok for a few minutes then go blank


It is your monitor inside problem, you need to know follow issue:\015\0121) inverter board some where the component got less connection\015\012like MOSFET drive or capacitor swelling need to resoldering or change.\015\0122) the back ... Dell E176FP 17" LCD Monitor

Monitor goes blank less than a second after turning on.


If you put bright light at an angle close to lcd can you see a windows shadow, text icons etc, ie still logic power passing,then .... (from a.n. other) after two weeks searching I finally find doctor living stone http://www.aplusperfect.com/articles/ ... Dell E176FP 17" LCD Monitor

MAG Innovision LT1919WDb flat screen goes black


When a monitor works for a few seconds or more and goes black it is a problem with the power inverter board over heating because of a bad capacitor or capacitors that are not the right size. There is no problem with the VGA controller since it shows ... Computer Monitors

Monitor goes blank less than a second after turning on.


The moniter may be having  some technical errors   maybe the IC's has got corrupt \015\012\015\012\015\012you need to call the seller of the moniter ... BenQ FP71G 17" LCD Monitor

Monitor goes blank less than a second after turning on.


Do you have an aftermarket video card. In the bios you have to tell the computer if it is looking for a agp/onboard or PCI video card. Either that or the video driver or settings are wrong Try safe mode to check ... Dell Dimension 2400 PC Desktop

LCD Monitor turns blank after 1-2 seconds


Yes, this is a very common problem. Often times it is the inverter capacitors that wear down (they look like small batteries with a white stripe and are close to the transformers). If you can get in to the circuit boards, these capacitors are often v ... Computer Monitors

Benq FP937s Monitor - no display


Usually this type of problem is due to a faulty electrolytic capacitor on the monitor's power supply board or the inverter board that powers the backlight lamps. If you have a soldering iron and some technical skill it's possible to repair this your ... Gateway FPD2275W LCD Monitor

Blank Screen & flashing button


It is one of three things, One is that it's not recieving a signal, mine flash when the computer is shut down, several monitors do this now. The second is that the either the video card is in need of service, or if you don't have a video card in your ... Dell E172FP 17" LCD Flat Panel Monitor

I have a Dell 1707fp monitor. When I power the monitor on it powers on normally. After a few miniutes, even though the power button is still green the display goes blank. I have tested this on other known good PC's. Any ideas what I need to replace? I am not affraid of taking the monitor apart. Thanks.


I just fixed my for less then 1 minute. Here was the problem, when turn on the PC with the monitor connected. The screen appear like normal for about 2 seconds then shut off black but the GREEN power LED stay on, if i press the power off and turn it ... Dell E173FP 17" LCD Monitor

E manchine e17tg turn on power you get just a


Mrmadgbull, How long will e17tg display the WIN-desktop before it goes to BLACK screen? Is it 1, 2 ...4, 5.....20 seconds? How old is unit? Does unit have internal ac to dc SMPS or external (lay on floor) SMPS? Did problem occur suddenly? What do yo ... E-Machines E17T 17" Flat Panel LCD Monitor

Monitor goes blank less than a second after turning on.


It's an LCD so the problem is most likely the back-light inverter board. Take a flashlight and shine it directly into the screen from the front. Can you see the image on the screen now? If the image is there but you can't see it without the flashligh ... Acer AL1715 17" LCD Monitor

Monitor goes blank less than a second after turning on.


It's an LCD so the problem is most likely the back-light inverter board.\015\012\015\012Take a flashlight and shine it directly into the screen from the front. Can you see the image on the screen now? \015\012\015\012If the image is there but you can ... Rosewill R900J 19" Flat Panel LCD Monitor

Monitor displays breifly then goes to blank screen


The green power light indicates that the monitor is receiving from the\015\012computer correctly. I suspect it is going into high voltage\015\012shutdown. There is a safety circuit that monitors the high\015\012voltage and shuts the monitor down if ... BenQ FP731 17" LCD Monitor

Monitor displays breifly then goes to blank screen


The power -inverter board probably needs an overhaul.\015\012I redo many of these.\015\012If the screen was pinkish or flickering before it finally got to this point, it is possible that a bulb has gone bad.\015\012Fran ... Proview PL926WBi 19" LCD Monitor

Monitor is just not turning on - Computer Monitors


Is your CPU working properly? \015\012if that the case, your monitor is in need of a service.anyway read this.\015\012this may help you.\015\012reasons for why a monitor not turning on?Reason 1: Wetness The ... Computer Monitors

Screen Goes Blank


Ive seen this on other monitors. Look for a 1 and 2. Some monitors do NOT auto detect a signal, and this one might not. Look for a way to set the monitor from Digital input to VGA input. Try that and see. ... Dell E173FP 17" LCD Monitor

Screen comes up for about 10 seconds, then goes blank


Hello Robert,You have a monitor with a common problem. After a few years some LCD monitors will blow a power supply. The problem is ca ... LG Flatron L1750S 17" LCD Monitor

Monitor goes blank automatically after about 40 minutes...


Hi Randygui,\015\012\015\012Sounds like the back light inverter board is bad.\015\012\015\012It's a very common problem.\015\012\015\012LCD's use four small cold compact fluorescent bulbs to back light the display. (thats what gives the LCD it's brig ... BenQ FP71G 17" LCD Monitor

My monitor AOC 912Sw-4 does not turn on. Power button's led is flashing all the time.At the beginning I waited some minutes and I could use it normally, but right now it is impossible see any image on it.


Only choice is to give the monitor for service.\015\012anyway read this, this help you.\015\012is your CPU working properly? if that the case, your monitor is in need of a service.reasons for why a monitor goes blank?Reason ... AOC 912SW-4 Monitor

Monitor stays on for a few seconds then goes out


This problem is very often caused by dry electrolytic capacitors on the inverter board. If you have some skill with soldering you could try to change them. When buying new ones ask for LOW-ESR capacitors for switching mode power supplies (SMPS) and 1 ... Acer AL1711 17" Flat Panel LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 1.0219 seconds