Having problems with your Dell Dimension 2400 PC Desktop ?

Monitor displays slowly after the computer starts.

\015 My monitor starts slowly after the computer is been started.it takes 5minutes to start,as soon the monitor starts it runs fine.\015\012When I leave my 4-yr old DELL Dimension 2400 computer, it goes to sleep and the MAG monitor goes to sleep, too, with the green light turning yellow. When I shake the mouse, the computer wakes up but the monitor does not start up for maybe 5 minutes or 10 minutes depending on how long the comuter has been asleep. When the monitor does come on, it is quick and bright and and works fine. Any help would be appreciated. Selimo\015

Answers :

Try to turn off you screen saver just turn off power monitor to see monitor easy wake up after long time.if ok means windows screen saver have problem if still same look like is you monitor something wrong need to check
Repair Help & Product Troubleshooting for Dell Dimension 2400 PC Desktop

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Monitor displays slowly after the computer starts.


Try to turn off you screen saver just turn off power monitor to see monitor easy wake up after long time.if ok means windows screen saver have problem if still same look like is you monitor something wrong need to check ... Dell Dimension 2400 PC Desktop

Color dis-order and then flickering display


Try uninstalling and reinstalling the monitor drivers if any are applicable, run a direct X test on your hardware make sure your video card is OK. Try doing a wiggle test on the VGA cable that is plug ed into the back of your computer, that sends the ... AOC CT720G 17" CRT Monitor

The monitor turns off and on repeatedly.


There are lots of reasons why it can shutdown, but happerlly none should be serious. It may be that the B+ or Power supply is too high, look for a pot near the power supply and try turning it down a bit. Also the x-ray protection may be too high, loo ... ViewSonic VE710b 17" Flat Panel LCD Monitor

Toshiba satellite a135 monitor goes black


You could have a defective screen - a defective inverter or a CCFL lamp.To determine if you have a LCD screen or video card problem, read this and follow the instructions.Defective CCFL backlight, it may have the following symptom: ... Toshiba Satellite A135-S2386 Notebook

Monitor displays slowly after the computer starts.


It is a problem with a passive capacitor in the unit.. I fhte unit is within the warranty period, you can contact Samsung and ask them to service it.. I just did the same.. ... Samsung SyncMaster 540N 15" LCD Monitor

Laptop to tv


If your tv don't have s video input,you can get an Svideo to RCA cord.\015\012If the tv does have s video input,just get an s video cable and plug it into the tv and computer s video ports and follow the steps below for setup.\015\012 ... Toshiba Satellite L305D-S5895 Notebook

Trying to use my hp laptop with sony lcd hdmi tv for movies


You should have an S video port on both tv and computer.\015\012\015\012If your tv don't have s video input,you can get an S video to RCA cord.If the tv does have s video input,just get an s video cable and plug it into the tv and c ... HP Pavilion dv6000z Notebook

Monitor went dark


You may have a defective CCFL backlight, it may have the following symptom: Screen flashes on and off or displays reddish pink hue. Picture stays on in red and slowly be come normal. Picture flickering with dim display or appear black. Picture ... Toshiba Satellite A135-S2386 Notebook

Power light flashing


Hello,It sounds like you have a monitor with a common problem. After a few years some LCD monitors\015\012will blow a power supply. The problem is caused by parts called\015\012capacitors overheating in the confined space of the monitor. ... Samsung SyncMaster 204B 20.1" LCD Monitor

Hi, I got a serious problem with my PC. The PC was working as "normal", but the monitor display was not "perfect" :-). So I went to control panel->display->setting->advanced->monitor. I cannot remember what exactly I have done, maybe I disabled the only monitor, which is the "default monitor". Then the computer automatically re-started. When the window come-up, there is no display on the screen. I think the computer was started correctly, but just no display. By now every time when the computer


Mike,\015\012\015\012I'd have to know the manufacturer and model of your PC to know for certain if this is the case. But based on the information I have, heres what I think happened.\015\012\015\012Your 1st symptom sounds like ... PC Desktops

Toshiba satellite laptop-can not switch it on


I don't have that model, but the layout is probably similar to mine. On the left hand side near the screen there is a blue socket where you can plug a VGA monitor, or, on the same side (on mine) there is a round socket where you can plug in an S-vide ... Toshiba Satellite A100-S8111TD Notebook

NO SIGNAL What do I do?


These messages are normal when the computer truly goes into suspend mode or loses the video signal (such as when the computer is suddenly turned off).If the monitor displays any of these messages when the computer should be displaying vid ... HP PAVILION A6230N DESKTOP PC

Screen shows different colour grids when starting then goes black with message in right corner "out of range"


Hello ssi1,This happens when your screen resolution is set to something higher\015\012than what your monitor can display. For example, if your monitor\015\012supports resolutions of up to 1024x768 and your video card allows you\015\012to ... PC Desktops

My HP monitor (f50) has malfunctioned


Try these 2 steps if they don't work get back to me :)Step 1. Connect the video cable and turn on the computer. What happens?\015\012 \015\012\015\012 \015\012\015\012 ... HP Pavilion F50 17" Flat Panel LCD Monitor

Unable to change color depth...


Ok I think i found your problem. You don't need to install any drivers.\015\012Switch your display to 256 colors\015\012\015\012\015\012To switch your display \015\012to 256 colors\015\012Some games and other software program ... eMachines W3611 PC Desktop

So I hooked this moniter up to my hp and all I get is two blinking lights


\012One monitor serves as the primary monitor, and this monitor displays the Logon dialog box when you start your computer. In addition, most programs will display windows on the primary monitor when you initially open them. You can selec ... HP A4331D 20" CRT Monitor

Monitor flickring Hi All, i am using the mercury (intel 845 gl chipset) mother board and i installed latest graphic drivers from intel site and i changed my monitor refresh rates also but my monitor gives flickering i tested My cpu with my another freind's monitor but there also gives flickering and i am sure that no magnetic devices are near to my computer and i checked the all power cables and i replaced the all power cables also but it is giving flickering, my monitor is flickering while in t


\015\012Flickering screen display Flickering on the screen can be caused by defective hardware in the computer or by improperly installed software, but it can also be caused by interference from external device ... E-Machines E17T 17" Flat Panel LCD Monitor

Attention out of range is displayed on ibm 2 74 monitor


To resolve this behavior, either change the refresh rate, or change the video adapter settings.\015\012To change the refresh rate:\015\012\015\012Restart\015\012the computer, and while it is restarting, press F8 ... IBM E74 17" CRT Monitor

Syncmaster 203B LCD not working with Vista 64


Try putting the graphics card from your old computer into your new computer. That is where I would start. ... Samsung SyncMaster 203B LCD Monitor

A couple of weeks ago the monitor would come on but when the computer started the light would start flashing but monitor would come on after a few minutes,then it slowly started to take longer and longer,now the light will not come on period. I tried connecting to a different comp,and a new powercord and a different scourse but no luck


This failure is caused by a semiconductor (perhaps a IC or Power transistor), as the part is getting worse, the display will taken longer to work. Unfortunately, today displays are getting cheaper and repairs on this kind of issue is not recomended. ... Hanns.G Corporation Computer Monitors

When I start my laptop, I dont see the startup from Toshiba and the computer monitor does not turn on. If I bang the computer hard, i see the toshiba startup and the monitor turns on.


You could have a defective screen - a defective inverter or a CCFL lamp or simply the video cable needs reseating. After reseating the video cable and the problem is still there then :- To determine if you have a LCD screen or video card problem, rea ... Toshiba Tecra A3 Notebook

Sony vaio PCG-GRT30P Screen Problem


You could have a defective screen, either a faulty inverter or a CCFL lamp - follow this to determine the fault.Defective CCFL backlight, it may have the following symptom: \015\012\015\012Screen fl ... Sony VAIO VGN-NR220E/S Notebook PC

My dell LCD does not work. computer work fine with external monitor. Some light came on briefly and it went dark again. I can see the deskdop with the flashlight in the background. I spend many hours talk to dell suppport and they seem not to have a clue what is going on, one said it was a bad memory and the other guy said it is monitor problem. I want fix it myself. my computer is dell inspiron 1520. The problem all start when the window finish update the system.


You could have a defective screen - a defective inverter or a CCFL lamp, follow this to determine the fault.Defective CCFL backlight, it may have the following symptom: \015\012\015\012S ... PC Laptops

Outof Range error message & black screen


To resolve this behavior, either change the refresh rate which is what is chnaged or the resolution or change the video adapter settings.\015\012 \015\012\015\012To change the refresh rate:\015\012\015\012 ... HP L1940 19" LCD Monitor

I changed Desktop resolution setting to higher, Monitor went black with "Out of Range" message


Please try this:\015\012To resolve this behavior, either change the refresh rate, or change the video adapter settings.To change the refresh rate:1. Restart the computer, and while it is restarting, press F8 until the St ... Planar PL1910M (Black) 19 in. Flat Panel LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.7835 seconds